http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Hu, Gao Sheng,Hur, Yeon Jae,Jia, Jing Ming,Lee, Jai Heon,Chung, Young Soo,Yi, Young Byung,Yun, Dae Jin,Park, Soon Ki,Kim, Doh Hoon Springer 2011 Plant cell reports Vol.30 No.4
<P>2-Aminoindan-2-phosphonic acid (AIP), a specific competitive phenylalanine ammonia lyase (PAL) inhibitor was applied to a suspension cell culture of Cistanche deserticola. The effects of AIP treatment on cell growth, PAL activity, contents and yields of total phenolic compound, salidroside and four phenylethanoid glycosides (PheGs) are investigated. The results demonstrated that, 0.5 and 2.0 μM AIP treatments had similar effects on the measurements investigated in this study. AIP treatment resulted in significant decreases in PAL activity, total phenolic compounds content, and PheGs content. Linear regression analysis showed that PAL activity had a high correlation coefficient with the total phenolic compound content and the four PheGs contents. Total PAL activity-time area under curve (AUC) had a high correlation coefficient with the total phenolic compound yield and the yields of five tested compounds in untreated cell samples. In AIP-treated cells, total PAL activity-time AUC retained a high correlation with the total phenolic compound yield and the yields of three tested compounds, echinacoside, acteoside, and tubuloside A, but not salidroside and cistanoside A. The difference could be caused by the different biosynthetic origins of each of the tested compounds. These results demonstrate the important role of PAL in the biosynthesis of PheGs in the suspension cell culture of C. deserticola.</P>
Enhancement of Aggregation-Induced Emission in Dye-Encapsulating Polymeric Micelles for Bioimaging
Wu, Wen-Chung,Chen, Ching-Yi,Tian, Yanqing,Jang, Sei-Hum,Hong, Yuning,Liu, Yang,Hu, Rongrong,Tang, Ben Zhong,Lee, Yi-Ting,Chen, Chin-Ti,Chen, Wen-Chang,Jen, Alex K.-Y. WILEY-VCH Verlag 2010 Advanced Functional Materials Vol.20 No.9
<P>Three amphiphilic block copolymers are employed to form polymeric micelles and function as nanocarriers to disperse hydrophobic aggregation-induced emission (AIE) dyes, 1,1,2,3,4,5-hexaphenylsilole (HPS) and/or bis(4-(N-(1-naphthyl) phenylamino)-phenyl)fumaronitrile (NPAFN), into aqueous solution for biological studies. Compared to their virtually non-emissive properties in organic solutions, the fluorescence intensity of these AIE dyes has increased significantly due to the spatial confinement that restricts intramolecular rotation of these dyes and their better compatibility in the hydrophobic core of polymeric micelles. The effect of the chemical structure of micelle cores on the photophysical properties of AIE dyes are investigated, and the fluorescence resonance energy transfer (FRET) from the green-emitting donor (HPS) to the red-emitting acceptor (NPAFN) is explored by co-encapsulating this FRET pair in the same micelle core. The highest fluorescence quantum yield (∼62%) could be achieved by encapsulating HPS aggregates in the micelles. Efficient energy transfer (>99%) and high amplification of emission (as high as 8 times) from the NPAFN acceptor could also be achieved by spatially confining the HPS/NPAFN FRET pair in the hydrophobic core of polymeric micelles. These micelles could be successfully internalized into the RAW 264.7 cells to demonstrate high-quality fluorescent images and cell viability due to improved quantum yield and reduced cytotoxicity.</P> <B>Graphic Abstract</B> <P>Highly efficient fluorescence probes are achieved through the encapsulation of aggregation-induced emission molecules, 1,1,2,3,4,5-hexaphenylsilole (HPS) and/or bis(4-(N-(1-naphthyl) phenylamino)-phenyl)fumaronitrile (NPAFN) in the core of polymeric micelles. Bright fluorescence cell images are shown with tunable colors of green directly from HPS aggregates and red through efficient fluorescence resonance energy transfer (FRET) from HPS aggregates to NPAFN aggregates. <img src='wiley_img_2010/1616301X-2010-20-9-ADFM200902043-content.gif' alt='wiley_img_2010/1616301X-2010-20-9-ADFM200902043-content'> </P>
Enhanced Performance of Solution‐Processed TESPE‐ADT Thin‐Film Transistors
Chen, Liang‐,Hsiang,Hu, Tarng‐,Shiang,Huang, Peng‐,Yi,Kim, Choongik,Yang, Ching‐,Hao,Wang, Juin‐,Jie,Yan, Jing‐,Yi,Ho, Jia‐,Chong,Lee, Cheng‐,Chung,Chen WILEY‐VCH Verlag 2013 Chemphyschem Vol.14 No.12
<P><B>Abstract</B></P><P>A solution‐processed anthradithiophene derivative, 5,11‐bis(4‐triethylsilylphenylethynyl)anthradithiophene (TESPE‐ADT), is studied for use as the semiconducting material in thin‐film transistors (TFTs). To enhance the electrical performance of the devices, two different kinds of solution processing (spin‐coating and drop‐casting) on various gate dielectrics as well as additional post‐treatment are employed on thin films of TESPE‐ADT, and <I>p</I>‐channel OTFT transport with hole mobilities as high as ∼0.12 cm<SUP>2</SUP> V<SUP>−1</SUP> s<SUP>−1</SUP> are achieved. The film morphologies and formed microstructures of the semiconductor films are characterized in terms of film processing conditions and are correlated with variations in device performance.</P>
Flexural behavior of reinforced lightweight concrete beams under reversed cyclic loading
Li-Kai Chien,Yi-Hao Kuo,Chung-Ho Huang,How-Ji Chen,Ping-Hu Cheng 국제구조공학회 2014 Structural Engineering and Mechanics, An Int'l Jou Vol.52 No.3
This paper presents the results of an experimental investigation on the flexural behavior of doubly reinforced lightweight concrete (R.L.C.) beams tested under cyclic loading. A total of 20 beam specimens were tested. Test results are presented in terms of ductility index, the degradation of strength and stiffness, and energy dissipation. The flexural properties of R.L.C. beam were compared to those of normal concrete (R.C.) beams. Test results show that R.L.C. beam with low and medium concrete strength (20, 40MPa) performed displacement ductility similar to the R.C. beam. The ductility can be improved by enhancing the concrete strength or decreasing the tension reinforcement ratio. Using lightweight aggregate in concrete is advantageous to the dynamic stiffness of R.L.C. beam. Enhancement of concrete strength and increase of reinforcement ratio will lead to increase of the stiffness degradation of beam. The energy dissipation of R.L.C beam, similar to R.C. beam, increase with the increase of tension reinforcement ratio. The energy dissipation of unit load cycle for smaller tension reinforcement ratio is relatively less than that of beam with higher reinforcement ratio.
Flexural behavior of reinforced lightweight concrete beams under reversed cyclic loading
Chien, Li-Kai,Kuo, Yi-Hao,Huang, Chung-Ho,Chen, How-Ji,Cheng, Ping-Hu Techno-Press 2014 Structural Engineering and Mechanics, An Int'l Jou Vol.52 No.3
This paper presents the results of an experimental investigation on the flexural behavior of doubly reinforced lightweight concrete (R.L.C.) beams tested under cyclic loading. A total of 20 beam specimens were tested. Test results are presented in terms of ductility index, the degradation of strength and stiffness, and energy dissipation. The flexural properties of R.L.C. beam were compared to those of normal concrete (R.C.) beams. Test results show that R.L.C. beam with low and medium concrete strength (20, 40MPa) performed displacement ductility similar to the R.C. beam. The ductility can be improved by enhancing the concrete strength or decreasing the tension reinforcement ratio. Using lightweight aggregate in concrete is advantageous to the dynamic stiffness of R.L.C. beam. Enhancement of concrete strength and increase of reinforcement ratio will lead to increase of the stiffness degradation of beam. The energy dissipation of R.L.C beam, similar to R.C. beam, increase with the increase of tension reinforcement ratio. The energy dissipation of unit load cycle for smaller tension reinforcement ratio is relatively less than that of beam with higher reinforcement ratio.
김용은(Yong-En Kim),이주영(Joo-Young Yi),장인걸(In-Gul Jang),허일남(Il-Nam Hu),정진균(Jin-Gyun Chung) 대한전자공학회 2006 대한전자공학회 학술대회 Vol.2006 No.11
Some digital signal processing applications, such as FFT’s request multiplications with predetermined coefficient. In this paper, an efficient constant multiplier design method for pre-determined coefficient is proposed. In case of FFT design used in UWB, it is shown that by the proposed method, area, power consumption and delay time can be reduced up to 30.6%, 27.2% and 6.2%, respectively, compared with conventional CSD method.
Thu-Trang Nguyen,Chih-Chien Hu,Rajalakshmi Sakthivel,Sasza Chyntara Nabilla,Yu-Wen Huang,Jiashing Yu,Nai-Chen Cheng,Yi-Jie Kuo,Ren-Jei Chung 한국생체재료학회 2022 생체재료학회지 Vol.26 No.2
Background: All types of movements involve the role of articular cartilage and bones. The presence of cartilage enables bones to move over one another smoothly. However, repetitive microtrauma and ischemia as well as genetic effects can cause an osteochondral lesion. Numerous treatment methods such as microfracture surgergy, autograft, and allograft, have been used, however, it possesses treatment challenges including prolonged recovery time after surgery and poses a financial burden on patients. Nowadays, various tissue engineering approaches have been developed to repair bone and osteochondral defects using biomaterial implants to induce the regeneration of stem cells. Methods: In this study, a collagen (Col)/γ-polyglutamate acid (PGA)/hydroxyapatite (HA) composite scaffold was fabricated using a 3D printing technique. A Col/γ-PGA/HA 2D membrane was also fabricated for comparison. The scaffolds (four layers) were designed with the size of 8 mm in diameter and 1.2 mm in thickness. The first layer was HA/γ-PGA and the second to fourth layers were Col/γ-PGA. In addition, a 2D membrane was constructed from hydroxyapatite/γ-PGA and collagen/γ-PGA with a ratio of 1:3. The biocompatibility property and degradation activity were investigated for both scaffold and membrane samples. Rat bone marrow mesenchymal stem cells (rBMSCs) and human adipose-derived stem cells (hADSCs) were cultured on the samples and were tested in-vitro to evaluate cell attachment, proliferation, and differentiation. In-vivo experiments were performed in the rat and nude mice models. Results: In-vitro and in-vivo results show that the developed scaffold is of well biodegradation and biocompatible properties, and the Col-HA scaffold enhances the mechanical properties for osteochondrogenesis in both in-vitro and animal trials. Conclusions: The composite would be a great biomaterial application for bone and osteochondral regeneration.