http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
채용웅,박재희 계명대학교 산업기술연구소 1998 産業技術硏究所 論文報告集 Vol.21 No.1
Two different shape injectors for the floating gate MOSFET which are fabricated in a standard CMOS process were compared. We have demonstrated that the programming operation with the injector with sharper tips than the other allows a large electron current to pass through the oxide between poly1 and poly2. It is clear that the rectangular corners in poly1 covered by poly2, as well as the edge on top of poly1, enhance the applied field. The reduced programming voltage will help prevent junction and oxide breakdown, and reduce the trapup problem. It is found that less than 0.1% charge leakage over 15 years at 125℃ is expected.
박재희,채용웅 계명대학교 산업기술연구소 1998 産業技術硏究所 論文報告集 Vol.21 No.1
The feasibility of producing a practical buried fiber optic pressure sensor with high sensitivity is demonstrated. Experiments were carried on and all fiber michelson interferometer which the sensing arm was buried in sand. When a 42 inches sensing arm was buried 5 inches deep in sand, the weight required for a half fringe shift in the sensor output was 8 pound and the sensitivity was about 22 degree/pound. When it was buried at 8 inches, the weight was 22 pound and sensitivity was about 8 degree/pound. The relation between the applied pressure and the phase change was linear. Experimental result showed that the optical fiber pressure sensor could be used for detecting people on foot and venicles passing over the buried fiber because it had high sensitivity.
( Yong Yoong Chai ),( Eun Hwa Jung ) 한국센서학회 2003 센서학회지 Vol.12 No.1
N/A We describe a charge pump circuit using VCO (voltage controlled oscillator) for storing information into local memories in neural networks. The VCO is used for adjusting the output voltage of the charge pump to the reference voltage and for reducing the fluctuation generated by the clocking scheme. The charge pump circuit is simulated by using Hynix 0.35㎛ CMOS process parameters. The proposed charge pump operates properly regardless to the temperature and the supply voltage variation.
채용웅(Yong-Yoong Chai) 한국전자통신학회 2020 한국전자통신학회 논문지 Vol.15 No.1
본 연구는 다양한 어셈블리 부품의 용접부 내부결함을 검사하기 위한 초음파 탐상 장비 개발에 관한 것이다. 본 연구에서는 초음파 탐상을 위하여 시스템의 모션제어 S/W, 초음파 송수신기 제어, 결함 판정 기준 설정 등의 계측 S/W 등이 설계되었으며, 양품과 불량품의 비교분석을 하기 위하여 용접결함 불량품 샘플워크 등도 제작되었다. 이와 같은 구성으로 이루어진 시스템을 통하여 어셈블리 부품 용접부의 결함 위치 및 깊이에 대한 자동검사 기능을 수행할 수 있었으며, 종전에 전문가에 의해 이루어졌던 용접부의 내부결함에 대한 판단을 시스템이 수행하도록 하였다. This research is related to a development of the ultrasonic detector for an internal defect detection of various assembly part s welding zone. In this research, measurement S/Ws including system s motion control, S/W ultrasonic transmitter/receiver control, defect judgment standard setting, etc. have been designed for ultrasonic detection, and welding defects sample network, etc. were also designed for comparison between products in good condition and defective products. Through this kind of system, automatic detection function can be performed for the depth and the defect location of the assembly parts welding zone, and the system is able to make a judgment of internal defect detection which is used to be performed by an expert in the past.
볼 프레스 압입장치의 생산성 향상을 위한 예열시스템 개발
채용웅(Yong Yoong Chai) 한국전자통신학회 2016 한국전자통신학회 논문지 Vol.11 No.11
본 논문은 기존의 오토 트랜스미션에 볼 삽입 시 나타나는 불량문제를 해소하기 위한 볼 프레스 압입 장치를 개발에 대한 내용이다. 볼 프레스 압입장치는 가열장치, 이 가열장치를 제어하기 위한 온도조절창치, 그리고 양산성을 향상하기 위한 자동화된 볼 삽입장치 등으로 구성되어 있다. 이 장치의 개발을 통해 국내 자동차 생산 오토 트랜스미션 부품의 품질 향상 및 생산성 향상에 기여할 수 있었으며 기업의 원가 절감 및 매출증대에 기여할 수 있었다. In this thesis, I developed a ball press pushing up equipment to solve the defect that occurs when the ball is inserted to the auto transmission. The ball press pushing up equipment is composed of heating device, thermostat which controls the heating device and the automated insertion device which helps to enhance mass production. This development contributes to quality improvement of domestic automobile production auto transmission part, and also contribute to cost reduction and sales increase for corporations.
채용웅(Yong Yoong Chai) 한국전자통신학회 2018 한국전자통신학회 논문지 Vol.13 No.1
본 논문은 배터리로 구동되는 500W급의 순수사인파 단상인버터에 관한 연구이다. 푸쉬풀 토폴로지를 이용하여 배터리의 전압을 400V로 승압하고, 이 승압된 전압을 H-브리지를 이용하여 상용 220VAC를 출력하는 인버터 구조이다. 이러한 토폴로지를 이용하여 정격입력전압 12VDC에 500W의 인버터를 설계 제작하였다. 그 결과 효율은 일부구간에서 90%를 넘었으나 평균적으로는 약 89.5% 정도의 효율을 나타내고, 출력전압, 주파수 변동 오차 및 THD는 ±5% 미만의 결과를 얻을 수 있었다. This paper is elaborates on the pure sine wave single phase inverter of 500W level which is driven by battery. The inverter is structured to raise the battery voltage to 400V by using the push-pull topology, and by using H-bridge with the high voltage, it outputs common 220VAC. This topology is utilized to use the power semiconductor device in order to design and manufacture the inverter of 500W at input voltage rating of 12VDC. As a result, the efficiency exceeds 90% in partial sections, but on average, the efficiency is approximately 89.5%, and as for output voltage, frequency fluctuation range and THD, the result can be less than ±5%.
채용웅(Yong-Yoong Chai),윤광열(Kwang-Yeol Yoon) 한국전자통신학회 2019 한국전자통신학회 논문지 Vol.14 No.5
본 연구에서는 와전류를 생성하는 모터를 제어하여 구동하는 히터를 설계하였다. 모터는 와전류 히터의 회전체를 구동하는데, 자기장은 와전류 히터의 회전체와 고정체 사이의 공기간극에서 주어지며, 고정체에 대한 회전체의 운동은 와전류를 발생시키며 이것이 결국 열을 발생시키게 된다. 본 연구에서는 이 장치의 효율에 영향을 주는 요소들의 분석을 위해 8개와 16개의 자석으로 구성된 회전판을 이용하였다. 그 결과 자기장의 자극은 모터의 속도와 회전체를 구성하는 자석의 개수에 의해 영향을 받는다는 것을 알 수 있었다. This paper descries the operation of a heater which was designed to control a motor that generates an eddy current. As the motor drives the rotor of an eddy current heater, magnetic fields are provided within the air gap between an eddy current heater’s rotor and stator. Throughout the research, a rotor composed of 8 and 16 pieces of magnets was used to analyze which are the factors that affect the efficiency of this equipment. Test results showed that the magnetic fields are influenced by variable functions including the velocity of a motor and the quantity of magnets composing a rotor.