http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최선규,유정한,이강민,박재우,Choi, Sun-Kyu,Yoo, Jung-Han,Lee, Kang-Min,Park, Jai-Woo 한국강구조학회 2012 韓國鋼構造學會 論文集 Vol.24 No.2
Unstiffened seated connections (USC) ensure easy installation and safety during erection, thereby making the process more economical. USCs consist of a seat angle for carrying the beam's reactions and a top angle to provide beam stability. These angles are bolted or welded to the beam and supporting member. This paper sought to propose a design table for the weld strength of such connections obtained from the elastic vector method (EVM) and the instantaneous center-of-rotation method (ICM) in terms of calculating the eccentricity. Also, the proposed design table is compared with both AISC and KBC specifications. 비보강받침접합(Unstiffened Seated Connection, USC)은 시공의 편의성과 설치시의 안정성 및 경제성이 있는 단순접합의 한 종류이다. 비보강받침접합은 하부ㄱ형강과 상부ㄱ형강으로 구성되며 하부ㄱ형강은 보의 단부반력전체를 지지하며, 상부ㄱ형강은 보의 안정을 위하여 설치한다. 상부와 하부ㄱ형강은 볼트 또는 용접에 의해 보와 지지부재에 접합된다. 본 연구에서는 비보강받침접합의 용접강도에 대한 실용적인 설계절차와 함께 용접부의 편심계산시 탄성벡터법(EVM)과 순간회전중심법(ICM)으로 소요지압길이에 근거한 설계도표를 제안하였다. 또한 제안한 설계방법에 의한 용접강도를 AISC와 KBC기준에 따라 비교하였다.
편심전단을 받는 단일판접합부의 경사연단거리를 고려한 볼트군의 설계법
최선규,유정한,박재우,Choi, Sun Kyu,Yoo, Jung Han,Park, Jai Woo 한국강구조학회 2014 韓國鋼構造學會 論文集 Vol.26 No.1
단일판접합(Single Plate Connections, 이하 SPC라 함)은 단순전단접합의 일종으로 한 장의 강판을 지지부재인 기둥이나 큰보의 웨브에 공장용접하고 보를 현장고력볼트로 접합하기 때문에 시공이 간편하고, 경제성이 있어 강구조 및 합성구조에서 널리 사용되고 있다. 일반형 단일판접합부의 고력볼트는 수직 1열로 2~12개가 사용되며, 단순보의 단부에서 필요한 회전유연성을 확보하기 위하여 고력볼트직경과 구멍형태에 따라 판의 두께를 제한하여 설계한다. SPC에서 편심전단을 받는 고력볼트군의 강도를 산정할 때, 고력볼트의 전단강도나, 판의 지압강도 또는 찢김(Tear-out)강도 중 최소값에 의해 설계강도가 결정되는데, 만약 연단고력볼트의 수직연단거리에 의한 찢김에 의해 고력볼트군의 강도가 결정될 때에는 매우 보수적으로 설계된다. 따라서 본 연구에서는 고력볼트의 반력각도에 의한 실제 경사연단거리를 구하고 이를 근거로 설계강도를 산정하는 설계절차를 제안하였다. 편심전단을 받는 '약-판/강-고력고력볼트' 설계모델의 일반형 단일판접합부 고력볼트군 해석을 위해 탄성벡터법(EVM)과 소성법인 수간회전중심법(ICM)을 이용해 그 효과를 비교하였다. 또한 실용적이고 편리한 설계를 위하여 경사연단거리를 고려한 일반형 단일판접합부의 설계도표를 제안한다. A single plate connection(SPC) consists of a plate welded to the columns and bolts connected to the beam web. The SPC is widely used for a simple shear connection of steel structure because it is easy-to-fabricated, easy-to-installed and economical. The conventional SPC is used for 2 to 12 bolts in a single vertical row. It is designed to limit the plate thickness by bolt diameter to obtain flexible and ductile connections. The design strength for eccentric shear shall be the lesser of the shear strength of bolts or bearing strength of plate and when the design strength is decided by edge distance failure, the results can be very conservative. Although the research on special solution for 'weak-plate/strong-bolt' model with 2 to 4 bolts has been conducted by L. S. Muir, and W. A. Thonton, 2004, study on generalized design procedures did not conduct. This study proposed design procedure for evaluation of the design strength of eccentric shear bolt groups on a single plate connection based on the actual edge distance and the direction of bolt reaction forces by using elastic vector method(EVM) and instantaneous center of rotation method(ICM).
토양환경 변화와 접지저항의 상관관계 분석을 통한 접지 저항값 예측 연구
최선규,이규영,문영호,심건보,Choi, Sun-Kyu,Lee, Kyu-Young,Moon, Young-Ho,Shim, Keon-Bo 한국전력공사 2020 KEPCO Journal on electric power and energy Vol.6 No.1
The purpose of this paper is to improve the grounding point measurement method for the maintenance of the earth resistance of the distribution line. This study defines the correlation among humidity of the soil, the earth resistivity and the grounding resistance. Based on the results of the study, the grounding resistance value measurement should be limited to the location where the earth resistivity change is large, and the measurement time and cost can be greatly reduced.
CRIEPI 방식을 이용한 국내 가공 배전선로에서의 뇌 섬락률 산정
최선규(Sun-Kyu Choi),서훈철(Hun-Chul Seo),한준(Jun Han),김철환(Chul-Hwan Kim),이병성(Byung-Sung Lee) 대한전기학회 2013 전기학회논문지 Vol.62 No.1
This paper analyzes the flashover rate by lightning in Korea distribution system. Because of random characteristics of lightning, the Monte Carlo method is applied to estimate the lightning performance. The magnitude of lightning stroke is based on the curve measured in field. The classification of direct and indirect lightning depends on the striking distance. The striking distance and flashover rate are calculated by using the method based on Central Research Institute of Electric Power Industry(CRIEPI). The distribution system and lightning is modeled by using EMTP and MATLAB, and the accuracy of modeling is discussed. The simulations for the various spacing between two adjacent surge arresters and the various grounding resistance of GW according to the existence of GW are performed and the simulation results are analyzed.