http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
자전연소합성법을 이용한 비정질 나노 붕소 분말 특성에미치는 첨가제의 영향
주신형,이태혁,조영희,김홍물,이혁희,이종현,Joo, Sin Hyong,Nersisyan, Hayk H.,Lee, Tae Hyuk,Cho, Young Hee,Kim, Hong Moule,Lee, Huk Hee,Lee, Jong Hyeon 한국재료학회 2015 한국재료학회지 Vol.25 No.12
The self-propagating high temperature synthesis approach was applied to synthesize amorphous boron nano-powders in argon atmospheres. For this purpose, we investigated the characteristics of a thermally induced combustion wave in the $B_2O_3+{\alpha}Mg$ system(${\alpha}=1.0-8.0$) in an argon atmospheres. In this study, the exothermic nature of the $B_2O_3-Mg$ reaction was investigated using thermodynamic calculations. Experimental study was conducted based on the calculation data and the SHS products consisting of crystalline boron and other compounds were obtained starting with a different initial molar ratio of Mg. It was found that the $B_2O_3$ and Mg reaction system produced a high combustion temperature with a rapid combustion reaction. In order to regulate the combustion reaction, NaCl, $Na_2B_4O_7$ and $H_3BO_3$ additives were investigated as diluents. In an experimental study, it was found that all diluents effectively stabilized the reaction regime. The final product of the $B_2O_3+{\alpha}Mg$ system with 0.5 mole $Na_2B_4O_7$ was identified to be amorphous boron nano-powders(< 100 nm).
Fe-Co기 고인성 고강도강의 반복 열처리 거동- Part 1. 조직제어
윤보희 ( Bo Hee Yoon ),박경태 ( Kyoung Tae Park ),이태혁 ( Tae Hyuk Lee ),김재훈 ( Jae Hoon Kim ),김홍규 ( Hong Kyu Kim ),이성 ( Seong Lew ),이종현 ( Jong Hyeon Lee ) 한국주조공학회 2012 한국주조공학회지 Vol.32 No.1
In this study, microstructural evaluation was carried out on secondary hardening type ultrahigh strength steel, Fe-Co-Ni composition. This paper as a first part of whole research presented the microstructural behavior by cyclic heat treatment. The cyclic heat treatment method includes normalizing, stress relieving, solution treatment and aging. Especially, solution treatments performed triple times to get maximized solution hardening. Phase transformation and microstructure were observed by using optical microscope (OM), Electron back-scattered diffraction (EBSD) and X-ray stress analyzer. During the triple solution treatment, size of grain boundary was dramatically decreased by generating a packet from the martensite transformation of residual austenite in the inner part of grain, whereas the hardness increase was not significant.
고순도 산화타이타늄 제조를 위한 탈질폐촉매로부터 타이타늄 회수공정 개발
문경혜 ( Gyeonghye Moon ),최인혁 ( In-hyeok Choi ),강희남 ( Hee-nam Kang ),이태혁 ( Tae-hyuk Lee ),이진영 ( Jin-young Lee ),강정신 ( Jungshin Kang ) 한국폐기물자원순환학회(구 한국폐기물학회) 2018 한국폐기물자원순환학회 춘계학술발표논문집 Vol.2018 No.-
최근 초미세먼지에 의한 환경문제가 대두되면서 주요 원인 중 하나인 발전소 및 자동차 등에서 발생되는 질소산화물 저감에 대한 관심이 높아지고 있다. 이에 따라 발전소를 중심으로 탈질촉매 설치가 증가되고 있으나, 사용수명을 다한 탈질폐촉매의 경우 대부분 매립되고 있어 폐촉매 내 주요 유가금속인 텅스텐, 바나듐 및 타이타늄에 대한 효과적 리싸이클링 공정 개발이 필요한 실정이다. 이에 따라 본 연구에서는 탈질폐촉매 내 타이타늄을 회수하여 고순도 산화타이타늄을 제조하기 위한 공정 개발을 실시하였다. 탈질폐촉매 내 타이타늄을 침출가능한 형태의 화합물로 제조하기 위해 1000 ℃에서 탄산나트륨과 탈질폐촉매를 반응시켜 sodium titanate를 제조하였다. 이를 수침출한 결과, 온도가 증가할수록 탈질폐촉매 내 알루미늄 및 실리콘의 침출률은 증가하였으며 최대 각 94 % 및 89 %의 침출률을 나타내었다. 또한 텅스텐 및 바나듐은 온도에 상관없이 99.5 % 이상의 침출률을 얻을 수 있었으며, 타이타늄은 침출되지 않았다. 타이타늄 침출액을 제조하기 위해 수침출 잔사를 5 - 7 M 염산을 사용하여 60 ℃에서 3시간 침출한 결과, 타이타늄 침출률은 97 %를 나타내었으나 86 - 99 %의 실리콘이 동시에 침출됨을 알 수 있었다. 타이타늄 침출액의 여과성 향상 및 고순도 산화타이타늄 제조를 위해 타이타늄 침출액 내 실리콘을 겔화반응에 의해 제거 후 얻어진 수용액을 90 ℃에서 hydrolysis 반응을 시킨 결과 순도 99.2 % 이상의 산화타이타늄을 제조할 수 있었다.