http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
InSb 박막의 결정성 및 화학양론이 이동도에 미치는 영향
이정영,이병수,Lee, Jeong-Young,Lee, Byung-Soo 한국마이크로전자및패키징학회 2012 마이크로전자 및 패키징학회지 Vol.19 No.1
DC 마그네트론 스퍼터를 이용하여 $InSb$ 박막을 증착하고 증착온도, 후속 열처리, 증발 차폐막 및 적층구조의 영향을 조사 하였다. 증착직후의 $InSb$ 시편에서 증착온도의 증가와 더불어 이동도와 전자농도 모두 거의 선형적으로 증가 하였으며 이동도가 극히 낮은 영역에서의 이동도는 화학양론비보다도 결정립의 크기에 직접적으로 영향을 받는 것으로 확인 되었다. 차폐막이 없는 경우에 비하여 차폐막을 형성시킨 경우 이동도가 크게 증가 하였으며, 또한 적층구조 시편의 경우 $In$의 증착량 증가와 더불어 이동도가 증가 하였다. 이는 두 경우 모두 박막내의 $In$과 $Sb$의 화학양론비가 점차 정량에 가까워지기 때문인 것으로 판단된다. 차폐막을 형성시키고 열처리한 시편의 경우 열처리 시간이 길어질수록 박막의 이동도는 증가하고 있으며 박막의 최대 이동도값은 1612 $cm^2$/Vs로 측정 되었다. $InSb$ films were fabricated by DC magnetron sputtering and the effects of deposition temperature, heat treatment, passivation from evaporation and multi-layered structure were investigated. Electron mobility and electron concentration were linearly increased with deposition temperature for as-deposited specimens. It was found that the mobilities depend on the grain size rather than the stoichiometry for the samples with very low mobilities. The mobilities largely increased for the specimens with evaporation passivation compared with those without passivation layer. The mobility also increased with the amount of indium deposition in the multi-layer structured $InSb$ films. It was found that the mobility increments in both cases are due to the matching of the stoichiometry in $InSb$ films. For the heat treated and passivated specimens, the mobilities increased with annealing time and the maximum mobility was measured as 1612 $cm^2$/Vs.
전자기력을 이용한 진동형 자이로스코프의 가진 및 검출 기법 연구
이정영,홍성경 제어·로봇·시스템학회 2003 제어·로봇·시스템학회 논문지 Vol.9 No.1
Driving and pick-off using electromagnetic force for a cylindrical vibratory gyroscope is considered. A gyroscope consisting of thin cylindrical vibrating element and electromagnetic drive and pick-off element is designed, fabricated and tested. The results of the proposed pick-off method were compared with the results of the highly precise laser interferometer and eddy current sensor as it was used as the reference standard. Through the experiment, it is verified that the proposed electromagnetic driving and pick-off method can be an effective alternative to conventional electrostatic or piezo-electric methods.
2,3-Dihydroxybiphenyl Dioxygenase 생산을 위한 E. coli CK1092의 배양조건
이정영,김영수,이기성,민경희,김영창,김치경,임재윤,Lee, Jung-Young,Kim, Youngsoo,Lee, Ki-Sung,Min, Kyung-Hee,Kim, Young-Chang,Kim, Chi-Kyung,Lim, Jai-Yun 한국미생물학회 1998 미생물학회지 Vol.34 No.1
PCBs를 분해하는 Pseudomonas sp. P20 균주의 pcbC gene이 재조합 된 E. coli CK1092 균주를 이용하여 2,3-dihydroxybiphenyl dioxygenase 생산에 미치는 배양조건을 검토하였다. E. coli CK1092를 2% sucrose가 포함된 LB 배지를 기본배지로 하여 질소원, 금속이온 등의 영향을 조사한 결과, $Fe^{3+}$와 $Fe^{2+}$이 $10^{-5}M$의 농도일때 효소생산이 증가되었으며 배양최적온도는 $37^{\circ}C$, 배양초기 pH 7.0일때 효소생산이 우수하였다. 배양조에서의 배양조건은 초기 pH 7.0, 통기량 1 v/v/m, 교반속도 200rpm에서 가장 효소생성이 우수하였다. To obtain higher yield of 2,3-dihydroxybiphenyl(2,3-DHBP) dioxygenase by recombinant E. coli CK1092 carrying pcbC gene of Pseudomonas sp. P20, the environmental and physiological factors were investigated and the cultural conditions using jar fermentor were studied. E. coli CKl092 was grown in LB medium supplemented with 2% sucrose, as a basal medium. The effect of various metal ions on the enzyme production was investigated. In particular, the enzyme production increased in the presence of $Fe^{3+}$ and $Fe^{2+}$, and showed the maxium at the concentration of $10^{-5}M$. The enzyme production was increased by 55% in the medium containing $Fe^{3+}$ ($10^{-5}M$) ion. The optimal temperature and initial pH for cell growth were $37^{\circ}C$ and 7.0, respectively. In the culture using a fermentor at $37^{\circ}C$, the optimal conditions for the enzyme production were obtained at the initial pH 7.0, 1 v/v/m of aeration rate, 200 rpm of agitation speed. It was found that enzyme activity was higher when cultivated without pH control than with pH control.