http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
2005 KEPIC-Week 우수사례 논문 - 선행호기 사례분석을 통한 신규원전의 품질제고에 대한 제언
이재훈,이상훈,김우성,Lee, Jae-Hun,Lee, Sang-Hun,Kim, U-Seong 대한전기협회 2005 전기저널 Vol.348 No.-
대한전기협회는 지난 8월 30일터 9월 2일까지 부산 해운대 그랜드호텔에서 정부, 산업계, 학계, 연구계 등 전력산업계 관계자 등 800여명이 참석한 가운데‘2005 KEPIC-Week’행사를 개최했습니다. 이날 발표된 논문주제 중에서 우수한 논문을 시리즈로 게재합니다.
이재훈,김재수,유진수,변양헌,조정홍,Lee, Jae-Hoon,Kim, Jea-Soo,Yoo, Jin-Soo,Byun, Yang-Hun,Cho, Jung-Hong 한국음향학회 2008 韓國音響學會誌 Vol.27 No.1
수동소나를 이용하여 표적을 탐지하는 경우, 탐지거리를 최대화하는 최적의 수심이 존재한다. 최적의 수심은 표적과 소나의 수심, 음속분포 그리고 해저지형에 따라 달라진다. 본 논문에서는 이 문제를 해저지형이 경사진 환경과 중규모 난수성 소용돌이 환경, 두 가지의 거리종속 환경에 적용하여 소나 수심에 따른 탐지거리를 구하는 수치실험을 통해 소나의 최적운용수심에 대한 연구를 수행하였다. 해저지형이 경사진 환경의 경우 동해안의 여름 음속분포를 사용하였으며, 소나의 입장에서 표적을 향할 때 수심이 깊어지는 내리막경사 보다 그 반대 지형인 오르막경사에서의 탐지거리가 상대적으로 큰 것을 수치실험을 통해 확인하였다. 난수성 소용돌이 환경의 경우, 소용돌이 외부에 있는 소나에서 내부에 있는 표적을 탐지하는 경우보다 소용돌이 내부에 있는 소나에서 외부에 있는 표적을 탐지하는 경우의 탐지거리가 길어짐을 확인하였다. In the detection of an underwater target, there exists an optimal search depth for the sonar systems, at which the Probability of Detection is maximized. The optimal search depth is dependent on the depths of the target and sonar, the sound speed profile, and the bathymetry. In this paper, we address this question in range-dependent environments, particularly for the bathymetry with slope and with warm eddy. For range-dependent bathymetry, the typical sound profile in the East Sea of Korea was used. The detection range was greater when the sonar was located in deep water than in shallow water. As for the case of eddy, mesoscale warm eddy was used, and the detection range was greater when looking out of the warm eddy than when looking into the eddy.
공압식 소재물림 가이드부쉬 시스템의 설계 및 가공정도 평가
이재훈,이수민,박성훈,이시복,Lee, Jae-Hoon,Yi, Su-Min,Park, Seong-Hun,Lee, Shi-Bok 한국생산제조학회 2010 한국생산제조학회지 Vol.26 No.1
Generally, a fixed type guide-bush system is installed during machining miniature work-pieces with high precision in the multi-task CNC lathe. But a conventional guide-bush system does not provide a constant clamping force under the condition of varying work-piece diameters. It is important to maintain a constant clamping force for guaranteeing machining precision. This paper proposes a new guide-bush system with a pneumatic clamping device for the CNC Swiss-turn lathe to keep constant clamping force with changes in work-piece diameters. Through performance tests, new clamping system developed in the study showed better machining precision at the cost of a small increase in the temperature of the system than conventional systems due to an increase in the frictional heat and a change in the heat transfer route.
초기화가 불가능한 풀립플롭을 이용한 시험 불가능 고장 검출에 관한 연구
이재훈,조진우,Lee, Jae-Hun,Jo, Jin-U 한국정보처리학회 1997 정보처리논문지 Vol.4 No.5
본 논문에서는 순차화로에서의 시험 불가능 고장을 찾는 새로운 알고리즘을 제시 하였다. 이 알고리즘에서는 초기화가 불가능한 플플롭을 먼저 찾으면서 이 과정에서 이 플립플롭의 초기화를 막는 고장, FPI를 찾고 이 고장의 전파 경로를 검색한다. 또한 이 알고리즘을 ISCA889 벤츠마크 회로를 대상으로 적용하여 시험 불가능한 FPI의 갯수를 제시하였다. 테스트 생성에 소요되는 시간의 대부분이 시험 불가능고장의 검출에 사용 되는 것을 고려할 때, 이 알고리즘을 테스트 생성기의 전처리 과정으로 사용하면, 테스트 생성기의 효율을 크게 높일 것으로 기대된다. Undetectable faults in a digital circuit are faults that no input patterms can detect.Identifying these faults in test geferation process is very time- consuming especially for sequential circuits .In this paper we present a new algorithm to identify unedtectable faults in sequential cirouits .In the alorithm. we identify uninitializable fip-flops and then, faults that prevent intialization of the fkip-flops(FPIs)are identified, finally propagation path of the FPI is checked. Time complexity of this algorithm is porportional to the product of the number of flip flops with at lest a self loop and the number of gates in the circuit. Experiments were performed on the ISCAS89 benchmark ciruits to show the feadibility of the proposed algorithm.We could identify large amount of undetectable faults(up to 50% of the number of flip-flops)in circuits with uninitializable flip-flops. Consider-ing that most of the time in test generation is cinsumed in identifying undetecatable faults, performance of test generator can be improved by using this algorithm as a pre-processing of test generation.
이재훈,Lee, Jae-Hun 대한건축사협회 2003 建築士 Vol.2003 No.11
건축공간에 대해 막연히 동경하며, 좋은 건축공간을 만들기 위해 노력한 시간을 기억해본다. 그다지 손에 잡히는 것이 없어 보인다. 어찌보면 건축주의 요구와 구조, 기능, 설비, 건축비의 문제에 매달려 좋은 건축공간이 가져야할 모습을 마지막까지 지키지 못한 경우가 많다. 그러나 건축가에게 꿈같은 것은 이 세상에 존재해본 적이 없는 나만이 만들어낸 건축공간일 것이다. 그것은 영원한 건축가의 꿈이며, 누가 뭐라고 하더라도 건축인이 건축적 삶을 사는 근거를 만들어 주는 것이다. 근래, 건축공간에 우선하여 형태적 유희나 재료의 표현, 프로덕션의 즐거움 자체에 의미를 두는 경향이 보여지기도 하지만, 건축이 존재하는 고유한 영역은 결국 공간이라는 것에 모두 공감하리라고 생각된다. 젊은 시절 건축공간에 대한 향수를 달래며, 잊혀져가는 건축공간의 가치를 새롭게 일으키고자 공간클럽이라는 이름으로 건축공간에 대한 이런 저런 얘기를 던지려고 한다. 더러는 일반적인 이야기도 있겠지만, 소주제를 통해 건축공간을 전혀 새롭게 볼 수 있는 시각의 존재를 드러낼 수 있을 것으로 생각한다.