http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전기저항형 금속산화물 센서의 인쇄공정 최적화에 관한 연구
이석환,구지은,이문진,정정열,장지호,Lee, Seokhwan,Koo, Jieun,Lee, Moonjin,Jung, Jung-Yeul,Chang, Jiho 한국전기전자재료학회 2016 전기전자재료학회논문지 Vol.29 No.6
In this paper, we have studied about the optimum fabrication condition of the printed Indium Tin Oxide (ITO) layers for the electrical resistance-type sensor application. We have investigated on the substrates surface treatments, mixing ratio of organic binder/ITO powder, and viscosity of the printing paste to determine the optimum condition of the screen printed ITO layer. Also, we found that the printing condition is closely related with the sensor performance. To know the feasibility of printed ITO layer as an electrical resistance-type sensor, we have fabricated the ITO sensors with a printed and sputtered ITO layers. The printed ITO films revealed $10^2$ times higher sensitivity than the sputtered ITO layer. Also, the sputtered ITO layer exhibited an operating temperature of $127^{\circ}C$ at the operating voltage of 5 V. While, in case of the printed ITO layer showed the operating temperature of $27.6^{\circ}C$ in high operating voltage of 30 V. We found that the printed ITO layer is suitable for the various sensor applications.
이석환(SeokHwan Lee),이정금(JungKeum Lee),심현(Hyun Sim) 한국전자통신학회 2022 한국전자통신학회 논문지 Vol.17 No.2
본 연구에서는 Nreal에서 개발한 AR글래스를 활용한 실시간 캐릭터 네비게이션을 개발한다. 실시간 캐릭터 네비게이션은 특정하지 않은 공간을 NPC 캐릭터가 이동하면서 안내를 하기 때문에 일반적인 마커 기반 AR로는 불가능하다. 이를 대체하기 위해서 디지털 트윈 기술을 기반으로 하는 마커리스 AR 시스템을 개발하였다. 기존 마커리스 AR은 GPS, 비컨 등의 하드웨어를 기반으로 운영되기 때문에 위치에 대한 정확도가 낮고 시스템에서 처리하는 시간이 길어져 실시간 AR 환경에서는 신뢰도가 낮은 문제가 발생한다. 이러한 문제점을 해결하기 위해 SLAM 기법을 활용하여 공간을 3D 개체로 구성하고, 디지털 트윈 기반의 마커리스 AR을 구성함으로써 실시간 AR 환경에서 별도의 하드웨어 사용 없이 AR 구현이 가능하게 된다. 이러한 실시간 AR 환경 구성은 순천만 정원, 순천 드라마촬영장 등 관광지에서 캐릭터를 이용한 네비게이션 시스템 구현을 가능하게 하였다. In this study, real-time character navigation using AR lens developed by Nreal is developed. Real-time character navigation is not possible with general marker-based AR because NPC characters must guide while moving in an unspecified space. To replace this, a markerless AR system was developed using Digital Twin technology. Existing markerless AR is operated based on hardware such as GPS, gyroscope, and magnetic sensor, so location accuracy is low and processing time in the system is long, which results low reliability in real-time AR environment. In order to solve this problem, using the SLAM technique to construct a space into a 3D object and to construct a markerless AR based on point location, AR can be implemented without any hardware intervention in a real-time AR environment. This real-time AR environment configuration made it possible to implement a navigation system using characters in tourist attractions such as Suncheon Bay Garden and Suncheon Drama Filming Site.
ITO 인쇄 박막을 이용한 pH 검출 센서 제작에 관한 연구
이석환(Seokhwan Lee),정정열(Jung-Yeul Jung),이문진(Moonjin Lee),장지호(Jiho Chang) 한국해양환경·에너지학회 2016 한국해양환경·에너지학회 학술대회논문집 Vol.2016 No.5
본 연구에서는 금속산화물 분체를 이용하여 인쇄 박막을 제작하고, 이의 해양오염 방제용 pH 센서로의 응용 가능성에 대해 연구하였다. 우선 ITO 분체로 스크린 인쇄기법을 이용하여 박막으로 제작하였다. 이렇게 제작된 전기저항형 박막을 이용하여 센서를 제작하고 pH buffer 용액에서의 저항변화를 확인하였다. 본 실험에서 사용한 InO, SnO, InSnO의 세 가지 금속산화물 중 ITO 가 가장 좋은 반응성을 가지고 있음을 확인하였으며. 이때 저항 변화의 원인은 표면과 전해질용액 사이에서의 일어나는 산화-환원 반응에 의한 것으로 해석하였다. In this study, we have investigated the feasibility of the printed Metal Oxide films as an pH sensor. First of all, we made a metal oxide films using conventional screen printing method. We have fabricated an electrical resistance-type pH sensor, and to confirm the sensor operation, resistance change was monitored in the pH buffer solutions. Among the three metal oxdides (InO, SnO, InSnO), ITO revealed the best result. The resistance changes of the sensor was explained in terms of redox reaction on the surface.