http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
나노임프린트 패터닝과 자성박막도금을 이용하여 제작한 패턴드미디어용 자기패턴의 자기적 및 결정구조특성에 관한 연구
이병규,이두현,이명복,김해성,조은형,손진승,이창형,정근희,서수정,Lee, B.K.,Lee, D.H.,Lee, M.B.,Kim, H.S.,Cho, E.H.,Sohn, J.S.,Lee, C.H.,Jeong, G.H.,Suh, S.J. 한국자기학회 2008 韓國磁氣學會誌 Vol.18 No.2
Magnetic and crystallographic properties of patterned media fabricated by nanoimprint lithography and Co-Pt electroplating were studied. Thin films of Ru(20 nm)/Ta(5 nm)/$SiO_2$(100 nm) were deposited on Si(100) wafer and then 25 nm hole pattern was fabricated by nanoimprint lithography on substrate. The electroplated Co-Pt nano-dots have the diameter of 35 nm and the height of 27 nm. Magnetic dot patterns of Co-Pt alloy were created using electroplated Co-Pt alloy and then their properties were measured by MFM, SQUID, SEM, TEM and AFM. We observed single domain with perendicular anisotropy for each dot and achieved optimum coercivity of 2900 Oe. These results mean that patterned media fabricated by nanoimprint lithography and electroplating have good properties in view of extending superparamagnetic limit while satisfying the writability requirements with the present write heads. 50 nm pitch의 magnetic dot pattern을 갖는 hard disk drive용 patterned media를 nanoimprint lithography(NIL) patterning과 electroplating 공정을 이용하여 제작하고 자기 및 결정구조 특성을 관찰하였다. Patterned media는 Si(100) wafer 위에 Ru(20nm)/Ta(5 nm)/$SiO_2$(100 nm)를 순차적으로 증착한 후 nanoimprint lithography를 이용하여 25 nm half pitch의 hole pattern을 형성하고 그 후 패터닝된 기판을 plasma ashing 공정을 이용하여 기판의 Ru층을 노출시킨뒤 electroplating을 이용하여 Co-Pt 합금막을 증착하여 제작하였다. Magnetic force microscopy(MFM) 분석을 이용하여 제작된 각각의 magnetic dot pattern이 single domain 특성과 수직자기이방성을 가지고 있음을 확인하였고, superconducting quantum interference device(SQUID) 분석을 통하여 2900 Oe이상의 높은 수직방향 보자력을 확인하였다.
옥희경(H.K. Ock),오양열(Y.Y. Oh),류진희(J.H. Ryu),이수환(S.H. Lee),이학성(H.S. Lee),이광승(G.S. Lee),정강호(K.H. Jung),강방훈(B.H. Kang),이병규(B.K. Lee) 한국토양비료학회 2021 한국토양비료학회 학술발표회 초록집 Vol.2021 No.11
새만금간척지 담수호의 환경보전 및 수질개선을 위해 비점오염원 발생을 저감할 수 있는 친환경적 영농기술 개발 및 실천이 요구된다. 따라서 화학비료 사용량을 절감하고자 간척지에서 T-N(Total Nitrogen), T-P(Total phosphorus), 양이온 등의 함량이 높은 하천수를 활용한 케나프 재배방법을 개발하고자 하였다. 시험은 국립식량과학원 광활시험지 온실에서 포트(1/2000a)에 간척지 토양(사양토, 문포통)을 충전하여 진행하였다. 공시 품종으로 홍마(74-3)를 파종하였고 하천수는 만경강 상류에서 취수하였다. 처리별 하천수 투입량은 600, 800, 1000 mm 10a<SUP>-1</SUP> 수준으로 5~10월까지 처리하였고 수확기의 케나프 초장, 경태, 생체 중 조사를 통해 생육을 비교하였다. 하천관개수의 수질분석 결과 T-N은 평균 4.13 mg L<SUP>-1</SUP>, T-P는 평균 0.07 mg L<SUP>-1</SUP>, K 평균 4.77 mg L<SUP>-1</SUP>로 양분공급량은 N-P-K (kg 10 a<SUP>-1</SUP>)로 환산 시 600mm에서 2.48-0.04-2.86, 800mm에서 3.30-0.06-3.82, 1000mm에서 4.13-0.07-4.77 이었다. 수확기 생육분석 결과 관개 수준에 따라 초장, 경태, 생체중 모두 유의하게(α=0.05) 증가함을 확인하였다. 관개량 1000mm 처리구에서 초장은 221.5 cm, 경태 12.7 mm, 생체중 119.8 g 개<SUP>-1</SUP>였고, 1000mm 처리 대비 800mm와 600mm 처리는 초장은 87.4%, 82.9% 수준이었고, 경태는 각각 89.5%, 75.6% 수준이었으며, 생체중은 97.1%, 90.29% 수준으로 감소하였다. 본 실험을 통해 케나프 재배 시 하천수 투입량이 증가할수록 케나프 생육이 양호하였기에 하천수의 양분공급원으로 가능성을 확인하였다. 케나프 표준시비량(N-P₂O<SUB>5</SUB>-K₂O : 12-11.8-10.2) 기준으로 하천수 1000mm의 양분공급량은 질소 34.4 %, 인 0.6 %, 칼리 46.8 % 수준인 점을 감안하였을 때, 케나프 바이오매스 생산성 증대를 위해 하천수 및 질소비료의 적정 투입량 설정을 위한 추가적인 연구가 필요할 것으로 판단된다.
Die - upset법에 의한 Pr - Fe - B자석의 자기적 성질에 관한 연구
이경섭(K. S. Lee),서수정(S. J. Suh),박현순(H. S. Park),이병규(B. G. Lee),정지연(J. Y. Jung) 한국자기학회 1993 韓國磁氣學會誌 Vol.3 No.3
Starting ingot of Pr_(15)Fe_(77)B_8 were prepared by vacuum induction melting under argon atmosphere. The ingot were induction melted in a quartz crucible and then ejected as a molten alloy throuth a 0.6 ㎜ orifice onto a rotating copper wheel. An anisotropic magnet was prepared from ribbon by hot deformation techniques. A fully dense precursor magnet first made by pressing ribbons at 680 ℃ under a pressure of 21.8 ㎏ / ㎟. A substantially oriented magnets were obtained by die-upset under various conditions. As the compression ratio increases, the Br value increases pronouncedly though iHc decreases. Also, XRD analyses show increased diffraction peak from (006). From these results, it can be known that the magnetic easy axis was formed along the compression axis. As the die-upset speed increases, iHc increases though Br decreases. The Br increases up to 750 ℃ of die-upset temperature and above this temperature decreases. The value of 4πMs of the Pr_(15)Fe_(77)B_8 alloy prepared is found to be 11.8 KG. When the alloy was compressed by 0.8 under the die-upset speed of 0.05 m/sec at 750 ℃r B, was 11.0 KG indicating that the alloy has excellent magnetic anistropy. However, this alloy has some limitation because of low iHc.