지주막하출혈에 의한 뇌기저동맥의 형태학적 변화에 미치는 양격산화탕(凉膈散火湯)의 효과

이동원,이원철,Lee, Dong-Won,Lee, Won-Chul 대한한의학회 1999 대한한의학회지 Vol.20 No.2

The present study was performed to investigate the effect of Yangkyuksanhoa-tang on the morphological changes of the basilar artery after experimentally induced subarachnoid hemonrrhages(SAH). Yangkyuksanhoa-tang has been used freguently for cerebrovascular accident Sprague Dawley rats weighing between 350-400 g were used. The 6 normal rats and 24 SAH elicited rats were used, The SAH induced by injection of the fresh autologus heart blood (0.3-0.4 ml) into the cisterna magna through the posterior atlanta-occipital membrane, Sample group was given 3.3 ml/kg/day of Yangkyuksanhoa-tang extracts for 2 days after SAH. The experimental animals were killed at 48hrs after SAH. The morphological changes of the arterial walls were examined by light and electron microscopy. Following are the obtained results: 1. In SAH elicited rats, the size of the lumen in basilar artery was diminished by about 45% and the thickness of arterial wall was increased by about 82%. In SAH elicited rats with Yangkyuksanhoa-tang treatment, the size of the lumen in basilar artery was merely diminished by about 18% and the thickness of arterial wall was merely increased by about 19%. 2. In light microscopic examination, the endothelium was swollen into a cuboid shape and the layer of smooth muscle was increased in the basilar artery of SAH elicited rats. In SAH elicited rats with Yangkyuksanhoa-tang treatment, the size of the lumen in basilar artery was enlarged and the thickness was decreased than in SAH elicited rats. The endothelium was flattened into a squamous shape and the layer of smooth muscle was decreased more than in SAH elicited rats. 3. In electron microscopic examination, the endothelial cells with fragmentation nuclei were changed into a cuboid shape and the internal elastic lamina were folded at the basilar artery of SAH elicited rat. The nuclei of smooth muscle cells were changed into a round or crumpled shape. The length of smooth muscle was shorten and thickness was increased. But all kinds of morphologic changes were diminished in SAH elicited rats with Yangkyuksanhoa-tang treatment. Conclusion : Yangkyuksanhoa-tang extracts were effective to treat cerebral vasospasm after experimentally induced subarachnoid hemorrhage in rats.

고역률 LED 구동회로의 효율화에 관한 연구

이동원,김병철,Lee, Dong Won,Kim, Byungcheul 한국전기전자재료학회 2013 전기전자재료학회논문지 Vol.26 No.8

The rectified voltage supplied to LED lamp is used in load and then the surplus voltage can be produced in LED lighting. In this case, LED lighting is proposed that can recyclable the excess voltage to supply power to the controller.

특집 : 극한환경재료기술 - 지르코늄 금속의 제조 및 개발 동향

이동원,Lee, Dong-Won 재료연구소 2010 機械와 材料 Vol.21 No.4

지르코늄은 지구상에 9번째로 풍부한 금속소재이며, 어느 금속소재 보다는 우수한 내식성을 보유하고 있으며 기계적 특성 및 열전도도가 기존의 SUS 계 및 Ti 계 소재와 유사한 특징이 있기 때문에, 핸드폰, 보철재료, 합성섬유, 석유화학 공업용 부품에 널리 사용되고 있다. 지르코늄 부품제조를 위해서는 무엇보다도 초기 금속원자재의 생산기술 확보가 선행되어야 한다. 즉, 초기 금속원자재인 지르코늄 금속스폰지의 제조기술의 확보가 필요하다. 본 고에서는 지르코늄 금속의 용도, 산업동향, 지르코늄 스폰지 제조기술 및 최근 연구개발 동향에 대해 간략히 소개하였다.

탄탈륨 산화물의 마그네슘 가스환원에 의한 탄탈륨 금속분말 제조

이동원,Lee, Dong-Won 한국분말야금학회 2018 한국분말재료학회지 (KPMI) Vol.25 No.5

Metallic tantalum powder is manufactured by reducing tantalum oxide ($Ta_2O_5$) with magnesium gas at 1,073-1,223 K in a reactor under argon gas. The high thermodynamic stability of magnesium oxide makes the reduction reaction from tantalum oxide into tantalum powder possible. The microstructure after the reduction reaction has the form of a mixture of tantalum and magnesium oxide, and the latter could be entirely eliminated by dissolving in weak hydrochloric acid. The powder size in SEM microstructure for the tantalum powder increases after acid leaching in the range of 50-300 nm, and its internal crystallite sizes are observed to be 11.5 to 24.7 nm with increasing reduction temperatures. Moreover, the optimized reduction temperature is found to be 1,173 K as the minimum oxygen concentration is approximately 1.3 wt.%.

SHS 공정에 의해 제조된 Mo_xW_1-xSi₂ 발열체의 열화메커니즘

이동원,이상헌,김용남,이성철,구상모,오종민,Lee, Dong-Won,Lee, Sang-Hun,Kim, Yong-Nam,Lee, Sung-Chul,Koo, Sang-Mo,Oh, Jong-Min 한국전기전자재료학회 2017 전기전자재료학회논문지 Vol.30 No.10

The degradation mechanism of $Mo_xW_{1-x}Si_2$ ultrahigh-temperature heating elements fabricated by self-propagating high-temperature synthesiswas investigated. The $Mo_xW_{1-x}Si_2$ specimens (with and without post-annealing) were subjected to ADTs (accelerated degradation tests) at temperatures up to $1,700^{\circ}C$ at heating rates of 3, 4, 5, 7, and $14^{\circ}C/min$. The surface loads of all the specimen heaters were increased with the increase in the target temperature. For the $Mo_xW_{1-x}Si_2$ specimens without annealing, many pores and secondary-phase particles were observed in the microstructure; the surface load increased to $23.9W/cm^2$ at $1,700^{\circ}C$, while the bending strength drastically reduced to 242 MPa. In contrast, the $Mo_xW_{1-x}Si_2$ specimens after post-annealing retained $single-Mo_xW_{1-x}Si_2$ phases and showed superior durability after the ADT. Consequently, it is thought that the formation of microcracks and coarse secondary phases during the ADT are the main causes for the degraded performance of the $Mo_xW_{1-x}Si_2$ heating elements without post-annealing.

Spherodization of Granuled Cr₂O₃ Fine Ceramic Powder by Plasma Spray

이동원,이학성,유지훈,왕제필,Lee, Dong Won,Lee, Hak Sung,Yu, Ji-Hun,Wang, Jei-Pil The Korean Institute of Resources Recycling 2016 資源 리싸이클링 Vol.25 No.6

Spray dried $Cr_2O_3$ powder having an agglomerated structure of particles was twice treated into a plasma flame to increase its apparent density. The powder subjected to the first densification treatment did not show the entirely melted state keeping inner particle hollows, and it was fully melted after the second processing only. The powder size as a result of the second treatment decreased, and the apparent density as well as flowability were increased due to melting and surface smoothing effects. But a part of particles after the second densified treatment showed the hollow structure, especially those which were above $30{\mu}m$ in size. This densification behavior of the powder has been qualitatively discussed in terms of the thermal conductivity and inner gas pressure within aggregates exposed to the plasma flame. Spray dried $Cr_2O_3$ 분말은 겉보기밀도를 향상시키기 위해 plasma flame에 투입하여 실험을 진행 하였다. 첫번째 고밀도화 공정에서의 분말은 입자내부 공간까지 완전히 용해되어지지 않았으며, 두번째 공정 이후 완전히 용해가 되었다. 두번째 공정 결과 분말 입도는 작아졌으며, 용해 및 표면 연화에 의해 겉보기 밀도와 유동도는 향상이 되었다. 두번째 고밀도화 공정이 후 부분적으로 입자들이 $30{\mu}m$ 이상의 hollow structure을 보여주고 있다. 분말의 이러한 고밀도화는 plasma flame에 의해 응집되어진 응집체내의 열전도율 및 내부 가스압의 관점에서 정량적으로 논의 하였다.

최소시간 강하선 문제의 실증적·수학적 고찰

이동원,이양,정영우,Lee, Dong Won,Lee, Yang,Chung, Young Woo 영남수학회 2014 East Asian mathematical journal Vol.30 No.4

We can easily see the 'cycloid slide' in the many mathematics and science museums. The educational materials, however, do not give us any mathematical principle. For this reason, we, in this thesis, first study the brachistochrone problem in the history of mathematics, and suggest a method of how to teach the principle using 'the dynamic geometry software GSP5' in order to help students understand the idea that the cycloid is the brachistochrone. Secondly, we examine the origin of the calculus of variations and apply it to prove the brachistochrone problem in order to build up the teachers' background knowledge. This allows us to increase the worth of history of mathematics and recognize how useful the learning is which uses technological tools or materials, and we can expect that the learning which makes use of cycloid slide will be meaningful.

산화알루미늄 소재의 상용화기술 및 연구 동향

이동원,Lee, Dong-Won 한국전기전자재료학회 2020 전기전자재료 Vol.33 No.3

변화하는 교육과정과 그 속의 초등공학교육

이동원,Lee, Dong-Won 한국공학교육학회 2021 공학교육동향 Vol.28 No.4

과배란 처치시 우세난포 조절에 의한 한우 수정란 생산성 향상에 관한 연구 II. 과배란 처치 시기에 따른 난소반응

이동원,이병천,황우석,Lee, Dong-won,Lee, Byeong-chun,Hwang, Woo-suk 대한수의학회 2000 大韓獸醫學會誌 Vol.40 No.4

This study was investigated the ovarian response following superovulation treatment at different day of diestrus. The criterion for the presence or absence of a dominant follicle based on their morphological examination. Dominant follicle was puntured 48 hrs before the oneset of superovulation treatment by ultrasonography guided aspiration needle. Superovulation was induced by subcutaneous administration of FSH twice a day for 4 day in a decreasing regimen. There was no significant different between presence of dominont follicle and progesterone concentration/diameter of corpus luteum in HanWoo. Number of corpus luteum of donor after superovulation treatment was not significantly different in FSH administration at day 9, 11 and day 13 of estrus($14.5{\pm}4.5$, $15.5{\pm}5.6$ and $11.0{\pm}5.5$, respectively). But, the diameter of CL was significantly correlate(R2 = 0.757) with progesterone levels on day of superovulatory induction. After 7 days of artificial insemination, the embryos at 7 days were collected by uterine flushing after dominant follicle aspiration and superovulation treatment, and evaluated their quality by morphological criteria. Fifty five embryos with excellent, good and fair grade were transferred into 24 recipient cows. Seventeen offsprings, 1 of triplet, 4 of twins and 6 of singlet, were yield from 10 recipient cow. In conclusion, the present study showed that 1) dominant follicle can be determined by ultrasonography with rectal palpation by morphological evaluations, 2) superovulation response after follicular aspiration was not differ at day 9, 11 and 13 of estrus, 3) dominant follicle did not affect to progesterone concentration and diameter of CL, and 4) diameter of CL was significantly correlate to the level of progesterone concentrations in HanWoo.