http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이덕규(Duk-Kyu Lee),박희운(Hee-Un Park),이임영(Im-Yeong Lee) 한국정보과학회 2001 한국정보과학회 학술발표논문집 Vol.28 No.2Ⅰ
디지털 컨텐츠의 지적 재산권 보호를 위한 디지털 워터마킹 기술 및 핑거프린팅의 연구가 활발히 진행되고 있다. DRM(Digital Rights Management)는 디지털 컨텐츠 지적 재산권 보호뿐만 아니라 컨텐츠에 대한 출판, 유통 및 사용에 필요한 관리와 보호체계이다. 본 논문에서는 컨텐츠 보호 기술 중에서 컨텐츠에 대한 유통/서비스에 해당하는 기술을 만족하는 프로토콜을 제시할 것이다. 이를 위해 컨텐츠 불법복제 및 불법사용을 방지할 수 있도록 Agent를 이용한다. Agent는 특별한 설치가 필요 없이 컨텐츠 내에 내포되어 있게 된다. 내포된 Agent는 불법복제 및 불법사용에 대해 체크함으로써 불법복제의 사용을 차단할 수 있도록 한다.
구조물 안전 모니터링용 파장 스위핑 레이저를 위한 스위핑 자동 선형화
이덕규 ( Duk-kyu Lee ),엄진섭 ( Jinseob Eom ) 한국센서학회 2020 센서학회지 Vol.29 No.1
In this study, a novel method for sweeping automatic linearization of wavelength swept laser is proposed. Through the test performed on the implemented laser, the linear sweeping is held up well with a 97% decrease in nonlinearity, and 60 nm sweeping range, 1 kHz sweeping frequency, and 8.8 mW average optical power were obtained. The proposed method uses fiber Bragg grating array, optical-electronic conversion circuit, FPGA embedded module, and a LabVIEW program to generate new compensated wave patterns which were applied to the fiber Fabry-Perot tunable filter. Linear sweeping can reduce the cumbersome and time-consuming recalibration process required for nonlinear sweeping. Additionally, the proposed method provides more accurate measurement results for the structure safety monitoring system.
쉘요소를 활용한 STF 함침된 Kevlar Fabric의 방탄해석
이덕규 ( Duk Gyu Lee ),박종규 ( Jong Kyu Park ),정의경 ( Wui Kyung Jung ),이만영 ( Man Young Lee ),김시조 ( See Jo Kim ),문상호 ( Sang Ho Moon ),손권중 ( Kwon Joong Son ),조희근 ( Hee Keun Cho ) 한국복합재료학회 2016 Composites research Vol.29 No.1
본 연구에서는 3D 아이소파라메트릭 쉘요소 모델을 사용하여 전단농화유체(STF: shear thickening fluid)가 함침된 케블라 페브릭(Kevlar fabric) 복합재의 방탄성능에 대하여 해석을 수행하였다. 다양한 적층복합재(12, 18,20, 24-layer)를 대상으로 탄두 초기속도에 따른 충돌 후 속도(Residual velocity)를 측정하여 실험치와 비교하였다. SFT가 함침된 복합재의 방탄 성능의 효과를 검증하기 위하여 다양한 속도영역에서 STF가 함침된 것과 함침 되지않은 것의 방탄성능을 비교하였다. STF가 함침된 케블라 페브릭은 450 m/s 이하의 저속에서는 비교적 큰 마찰효과를 일으키며 고속에서는 STF가 함침된 Kevlar fabric의 마찰효과는 기대할 수 없는 수준으로 오히려 역효과를 일으키는 것을 확인할 수 있었다. 연구를 통해 STF가 함침된 케블라 페브릭의 특성을 퇴화 3D 쉘 요소를 사용하여 효과적으로 모사할 수 있었으며, 실험 치와의 결과 비교를 통하여 그 유효성을 검증하였다. Ballistic impact analyses have been performed with the Kevlar fabric impregnated with STF(shear thickening fluid). Multi-layer laminates modeled with 3D isoparametric shell elements were used for the performance analysis and their results are compared with experimental results. Both experiments and numerical analyses have been done to verify the usefulness of STF to enhance the impact resistance performance. The results showed that STF increases friction within a bundle of fiber, and this phenomena is more apparent in the velocity range of under near 450 m/s. In this research, it is emphasized that FEA analyses of STF impregnated Kevlar fabric laminate were successfully conducted using shell elements. Moreover, the effectiveness of the technique and accuracy were verified through the comparison with reliable experimental data.
CIA를 이용한 3차원 측정 및 자유곡면 생성에 관한 연구
이석순,이덕규 慶尙大學校生産技術硏究所 1998 生産技術硏究所論文集 Vol.14 No.-
The purpose of this research is to generate the sculptured surface of an object by using the 3-dimensional coordinate measuring system with the coded light approach. Three dimensional information of the object is measured by the coordinate measuring system. For the curve fitting,some points are extracted from the measured coordinates. These points are fitted by using the interpolating method with cubic spline functions. For the generation of sculptured surface, the points are connected with quadrilateral meshes.