http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
모더나이트 / γ - 알루미나의 특성과 노르말 - 데칸의 분해 활성
이경환,하백현 ( Kyong Hwan Lee,Baik Hyon Ha ) 한국화학공학회 1996 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.34 No.3
수소형 모더나이트를 스팀 처리한 것(SM)과 SM을 다시 염산과 스팀을 반복 처리한 것(DM)을 만들고 이를 질산알루미늄 용액에 넣고 암모니아수로 pH7.8과 9.5가 되게 하여 혼합된 촉매[SM(또는 DM)/A(7.8 또는 9.5)]를 제조하였다. 이들 시료에 대해 질소 흡/탈착 등온선을 얻고 이로부터 비표면적과 세공성을 구하였다. 또한 피리딘 흡착으로 산 특성을 연구하였고 미소 반응기에서 노르말-데칸의 분해 반응을 실시하였다. 노르말-데칸의 전화율은 pH7.8보다 pH9.5에서 혼합된 촉매에서 높았다. 이것은 세공구조와 Bro¨nsted 산량 차이로 생각된다. 또한 이소 파라핀과 아로마틱의 선택성은 중세공이 발달된 DM이 혼합된 촉매에서 높은 것으로 모더나이트의 중세공의 영향을 받았다. H-mordenites treated by steaming at 500℃(SM) was further treated by HCl(6N)/steaming(DM). These samples were mixed with aluminum hydroxide which were precipitated in aluminium nitrate solution at pH of 7.8 and 9.5. Nitrogen adsorption/desorption isotherms for surface area and pore size distribution, pyridine adsorption for acidity, and catalytic cracking of n-decane were carried out. The samples prepared at pH 9.5 showed higher catalytic activity in the cracking than those at pH7.8. This may be due to the difference in the Bro¨nsted acid amount and pore structure of the samples. We also observed that the samples mixed with DM which has developed mesopore were higher selectivity for iso-paraffines and aromatics.
2차세공이 형성된 모더나이트와 알루미나를 혼합한 촉매상에서 Triphenylmethane 의 분해반응
이경환,최준우,하백현 ( Kyong Hwan Lee,Jun Woo Choi,Baik Hyon Ha ) 한국공업화학회 1997 공업화학 Vol.8 No.6
수소형 모더나이트를 불화수소산처리하여 실리카/알루미나의 비가 다른 변형된 모더나이트를 만들고 이를 γ-알루미나와 혼합한 촉매를 제조하여 미소반응기에서 triphenylmethane(TPM)의 분해반응을 실시하였다. 미세공 구조인 수소형 모더나이트를 불화수소산처리로 탈알루미늄하면 산량은 감소하지만 2차 세공인 중세공이 형성되어 TPM의 분해활성과 2차 분해생성물인 벤젠의 선택성이 향상되었다. 그러나 더욱 불화수소산처리된 모더나이트는 산량 감소와 일부 세공구조의 파괴에 의한 미세공막힘 현상에 의해 분해활성이 저하되었다. 따라서 전처리된 모더나이트상에서 TPM의 분해활성과 벤젠의 선택성은 모더나이트의 실리카/알루미나 비가 17 정도에서 가장 우수하였다. 이들 전처리된 모더나이트를 알루미나와 혼합한 촉매는 순수한 모더나이트 촉매보다 TPM의 분해활성이 더욱 우수하였다. 이는 알루미나의 큰 중세공에서 TPM이 1차 분해반응하고 다음에 모더나이트의 중세공과 미세공에서 분해되는 단계적인 분해반응이 일어나기 때문이다. Modified mordenites by HF treatement, which have different SiO₂/Al₂O₃ ratio, and those mixed with γ-alumina are prepared and used for catalytic cracking of triphenylmethane(TPM) in micro-activity tester(MAT). Dealumination of mordenites decreased the acid content but developed secondary mesopores. The conversion and the selectivity of benzene over modified mordenites with the mesopores were increased. However, for the further dealuminated mordenites, they decreased due to the destruction of pore structure and low acid amount. Accordingly, the maximum cracking activity and the maximum selectivity of benzene were obtained about 17 SiO₂/Al₂O₃ ratio of modified mordenites. The modified mordenites mixed with alumina enhanced the cracking activity of TPM compared with the pure mordenites. It can be explained that TPM is cracked at active sites with in large pores of alumina firstly and further cracked into small molecules in zeolite pores as step mechanism of catalytic cracking.
이경환,최정현,이법기,정원식,김경규,김덕규,Lee, Kyeong-Hwan,Choi, Jung-Hyun,Lee, Bub-Ki,Cheong, Won-Sik,Kim, Kyoung-Kyoo,Kim, Duk-Gyoo 대한전자공학회 1999 電子工學會論文誌, S Vol.s36 No.11
In vector quantization (VQ), mean squared error (MSE) is widely used as a distance measure between vectors. But the distance between averages appears as a dominant quantity in MSE. In the case of image vectors, the coincidence of edge pattern is also important considering human visual system (HVS). Therefore, this paper presents a new distance measure using the variance of difference (VD) as a criterion for the coincidence of edge pattern. By using this in the VQ encoding, we can reduce the degradation of edge region in the reconstructed image. And applying this to the codebook design, we can obtain the final codebook that has a lot of various edge codevectors instead of redundant shade ones. 벡터양자화에서 거리계산법으로 주로 평균자승오차가 사용된다. 그러나 이를 이용하면 벡터들의 평균값 사이의 거리가 전체거리를 크게 좌우한다. 영상벡터일 경우 인간시각체계로 볼 때 에지패턴의 일치가 매우 중요하다. 본 논문에서는 벡터간의 에지패턴의 일치를 가늠하는 양으로 편차분산을 이용하고, 이것을 적용한 영상벡터에 맞는 거리계산법을 제안하였다. 이를 벡터양자화 부호화에 적용한 결과 복원영상의 에지부분 열화를 줄일 수 있었으며, 코드북 설계에 적용한 결과 중복된 평탄성분의 코드벡터 생성을 줄이고 다양한 에지성분의 코드벡터들을 가진 효율적인 코드북을 얻으므로써 부호화 성능이 향상됨을 볼 수 있었다.