http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
프로젝트 계획의 변동이 고객만족도에 미치는 영향: IT 프로젝트 결과 중심으로
윤형석,이석주,김승철,박소현,Yoon, Hyeong-Seok,Lee, Seouk-Joo,Kim, Seung-Chul,Park, So-Hyun 한국IT서비스학회 2022 한국IT서비스학회지 Vol.21 No.5
Companies are planning and executing IT projects using information technology as a means to secure external competitiveness. However, IT projects have high risks and uncertainties due to the invisibility of outputs (systems, services, products), and changes in plans frequently occur during project execution. As a result, most IT projects are closed without achieving the target performance. This can lead to a waste of resources and money for the company, which in turn leads to the loss of opportunities to enter new markets. This study intends to analyze the effect of changes in the project plan on customer satisfaction, which is the project performance. Also, we want to find the importance of project planning so that the target performance of the IT project can be achieved. For the empirical analysis of this study, about 500 actual project data were collected. As for the analysis method, statistical analysis such as simple and multiple regression analysis and control effect was performed. Looking at the results of the analysis, it was found that the scope change affects the cost change and the schedule change. Also, changes in scope and cost were found to affect project performance. The theoretical performance of this study proved the theoretical fact that good project performance comes out if the IT project is executed as planned. The practical performance suggested the need for a change in project management by proving that thorough execution of the project planning stage can improve the project performance in the Korean project management culture, where the project planning stage is poorly performed for the rapid implementation of the IT project.
공정관리 활용을 위한 BIM모델의 공정별 수순 및 위치정보 추출방안
윤형석,이재희,황재영,강효정,박상미,강인석,Yoon, Hyeongseok,Lee, Jaehee,Hwang, Jaeyeong,Kang, Hyojeong,Park, sangmi,Kang, Leenseok 한국건설관리학회 2022 한국건설관리학회 논문집 Vol.23 No.2
The simulation function by the 4D system is a representative BIM function in the construction stage. For the 4D simulation, schedule information for each activity must be created and then linked with the 3D model. Since the 3D model created in the design stage does not consider schedule information, there are practical difficulties in the process of creating schedule information for application to the construction stage and linking the 3D model. In this study, after extracting the schedule information of the construction stage using the HDBSCAN algorithm from the 3D model in the design stage, authors propose a methodology for automatically generating schedule information by identifying precedence and sequencing relationships by applying the topological alignment algorithm. Since the generated schedule information is created based on the 3D model, it can be used as information that is automatically linked by the common parameters between the schedule and the 3D model in the 4D system, and the practical utility of the 4D system can be increased. The proposed methodology was applied to the four bridge projects to confirm the schedule information generation, and applied to the 4D system to confirm the simplification of the link process between schedule and 3D model.
Drum구조 제동장치의 온도 변화에 따른 Clearance(Airgap) 보상 구현
윤형석(Hyungsuk Yoon),최진우(Jinwoo Choi),유용범(Yongbeom You) 한국자동차공학회 2022 한국자동차공학회 학술대회 및 전시회 Vol.2022 No.11
전자식 주차 제동 장치(이하 EPB)는 크게 캘리퍼 타입과 드럼 타입으로 나뉘며 제품 타입에 따라 동작 방식에 있어 차이가 있다. 드럼 타입의 경우 드럼 디스크의 형상이 온도가 상승함에 따라 외방향으로 팽창하고, 온도가 다시 상온으로 하강 시 내방향으로 수축된다. 전류를 통해 제어하는 체결(이하 Apply) 동작에서는 온도 특성에 영향이 크게 없으나, 시간 기반으로 제어하는 해제(이하 Release) 동작에서는 드럼 디스크의 팽창과 수축에 따라 드럼 내벽면과 슈 앗세이 사이의 간극(이하 clearance)이 충분히 확보되지 않을 수 있다. 가령 고온 상태에서의 Apply, Release 후 상온 상태에서 차량을 운용한다면 주행 중 의도치 않은 제동 마찰(이하 드래그) 현상이 발생할 수 있으며 이 드래그 현상은 차량 화재 발생 등 안전사고를 야기할 수도 있는 문제이기에 해결해야하는 중요한 사안이다. 본 논문에서는 이러한 드래그 현상을 방지하기 위해 clearance를 확보하는 보상 알고리즘을 구현한다. 드럼타입 브레이크의 온도 상승분(△T)에 따른 열팽창 정도를 계측하여 이를 기반으로 Release 보상 인자(고온 보상 MAP)를 정의한다. 고온 상태에서의 Apply 시 고온 보상 flag를 set 하고 온도 하강 전 Release시 해당 시점 온도에 상응하는 MAP의 factor만큼 Clearance를 추가 확보한다.
윤형석(Hyeong-Seok Yoon),이근웅(Keun-Woong Lee),정명희(Myung-Hee Jung),박양수(Yang-Su Park),이명준(Myung-Joon Lee) 한국정보과학회 2001 한국정보과학회 학술발표논문집 Vol.28 No.1A
최근 기업이나 조직에서 인터넷의 사용이 보편화되면서 웹을 사용한 기밀유출, 불필요한 웹 사용, 비 업무관련 사이트접속 등의 문제점이 증가하게 되었다. 따라서, 이런 사항들을 감시하여 적절한 조치를 취할 수 있도록 도와주는 웹 사용 현황 모니터링 시스템이 요구된다. 본 논문에서는 패킷 모니터링 기술을 기반으로 웹 사용 네트워크 모니터링 서버와 웹 브라우저로 간편하게 모니터링 할 수 있는 클라이언트 애플릿을 설계하고 구현하였다.
새로운 국민소통 플랫폼으로서 청와대 국민청원 - 현황과 법제도적 개선방안을 중심으로 -
윤형석 ( Yoon Hyung-Seok ) 제주대학교 법과정책연구원 2021 法과 政策 Vol.27 No.2
청와대 국민청원 제도가 개설된 지 3년이 지났다. 새로운 국민소통 플랫폼이라는 평가와 함께 비판도 쇄도하고 있으나 청원권의 부흥으로 이어졌다는 점에서는 공감대가 형성되어 있다. 청와대 국민청원은 그 내용에 비추어 보았을 때, 헌법과 청원법에서 규정하고 있는 청원에 해당된다. 하지만, 청와대는 국민청원이 국민과의 ‘직접 소통’ 차원에서 운영하고 있는 참여게시판 성격으로 헌법이나 청원법상 청원과 다른 의미를 지니고 있다고 주장하고 있다. 청와대 국민청원이 명확한 법적 근거가 없이 운영되면서 법제도적 과제와 개선 방안들이 거론되고 있다. 구체적으로, 법적근거 결여로 인한 폐쇄적 운영, 권력집중 및 권력남용의 통로로 악용, 일부 세력의 다중 투표 등을 통한 여론 왜곡 가능성, 부실한 답변이 문제점으로 지적되고 있다. 이를 개선하기 위해, 법적 근거와 명확한 가이드라인 마련을 통한 권력분립에 부합한 제도 개선, 여론의 객관적 반영을 위한 중복 동의 차단 및 토론 공간 확보, 답변 충실화 및 응답 구조의 체계화, 선거기간 동안 국민청원제도의 악용 방지 위한 실명제 채택 등을 검토할 필요가 있다. 국회는 2020년부터 국회판 온라인청원 제도인 국민동의청원을 자체적으로 운영하기 시작했으며, 60년 만에 청원법을 전면개정하여 국민의 청원권을 대폭 강화했다. 이에, 청와대 국민청원제도의 도입과 운영현황, 법제도적 과제를 검토하고, 최종적으로 집단적 갈등을 동반하는 여러 사회적 의제들을 넓고 깊게 담아낼 수 있는 지속가능한 공론장을 구성할 수 있는 개선방안들을 살펴보고자 한다. 특히, 청와대 국민청원제도가 신설될 때 기대했던 기능이 무력화되지 않기 위해서는 청와대의 역할이 근본적으로 재구성되어야 한다. 청와대가 만기친람형 해결자로 나서는 것이 아닌, 정부 부처 및 기관들이 나서 해당 현안들을 적극적으로 대응할 수 있도록 독려 하는 조율자로서의 역할에 충실해야 한다. 청와대를 매개로 대통령이 국민 여론과 직접 연결되는 단선 구조만으로는 내각과 정당, 국회의 자율적인 기능이 훼손되며 대통령 권력을 뒷받침하는 제도적 기반이 약화됨을 유의해야 한다. The Blue House of the Republic of Korea launched an online petition system in August 2017. While some criticize the system of deepening political divisions, the online petition system has served as a new communication platform. The system has led to the rejuvenation of the constitutional right to petition. The contents of the online petition system can be constructed as an exercise of the right to petition protected by the Constitution and the Petition Act. However, the Blue House has argued that the online petition system is merely a participatory mechanism that should be interpreted differently from the Constitution and the Petition Act. Consequently, related provisions of the Constitution and the Petition Act does not apply to the online petition system. As the Blue House online petition system is being managed under no concrete legislative basis, numerous legal institutional improvements have been suggested. Specifically, many have pointed to the arbitrary operations without any legal constraints, abuse of the system to concentrate power to the Blue House, possibility of distorting public opinion by a select minority, insufficient feedback as the system's shortcomings. As improvements, there is the need to legislate clear requirements and limits of the system, fix loopholes that allow repetitive petitioning, allow debate on the issues, form a system that makes sure proper authorities provide substantial responses, and adopt a temporary real-name system during elections. The National Assembly started its own online petition system in January 2020. The Petition Act was amended entirely for the first time in 60 years in order to fully protect the constitutional right to petition. In light of such events, there is the need to reflect the history of the Blue House online petition system and seek legal institutional improvements. Ultimately, the improved Blue House online petition system can contribute in forming a public sphere where political and social agendas can be resolved.
3D stack package의 구조해석과 모아레 측정법을 이용한 결과 비교
윤형석(Hyung Seok Yoon),최광성(Kwang Seong Choi),배현철(Hyun Cheol Bae),임병옥(Byeong Ok Lim),엄용성(Yong Sung Um),문종태(Jong Tae Moon),전인수(In Su Jeon) 대한기계학회 2010 대한기계학회 춘추학술대회 Vol.2010 No.11
Semiconductor devices become smaller, higher density and performance required is increased interest in this issue is a 3D package technology; Thermo-mechanical reliability was interested in. Coefficient of thermal expansion mismatch between dissimilar materials of the package takes the biggest factors in life are most interested in TSV (through silicon via) and the solder joints were treated with the finite element method. Bump chip thickness, interposer thickness, underfill's material property package of several factors that affect the reliability of CTE of underfill for the study was conducted by the largest change in stress was found to appear. We were aiming to optimize the design, production and real samples by comparing the results of the Moire measuring the reliability of numerical results have been verified.