http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오상협,김명수,이흥락,Oh Sanghyub,Kim Myungsoo,Lee Heung Lark 한국전기화학회 2000 한국전기화학회지 Vol.3 No.2
겔형 VRLA전지의 파손방식을 조사하기 위하여 $100\%$ 방전심도에서 5시간율 전류로 충방전 수명시험을 하였다. 정전압 충전방식을 사용하여 충전전압을 2.40V와 2.50V로 하였을 때 1,000회 이상의 수명을 나타내었으며, 전지의 무게변화를 측정한 결과 각각 426.4g과 391.2g의 전해액이 감소하였다 2.50V로 충전한 전지가 우수한 수명특성을 나타내었으며, 전해액 손실량이 충전계수와 비례하는 것을 알 수 있었다 1,000회의 충방전 수명시험을 한 전지의 양극기판에는 약 $50{\mu}m$의 부식층이 관찰되었고, 활성물질의 미세구조는 크게 변하였다. 양극판의 파손방식은 활물질 탈락이며, 전해액 손실이 방전용량 감소의 원인인 것을 알 수 있었다. Cycle life test was carried out to evaluate the failure modes of the gel type nth batteries at $C_5$ currents and $100\%$ DOD. When the batteries were charged at constant voltage of 2.40 V and 2.50 Vi respectively, cycle lift was over 1,000 cycles. The batteries lost 426.4 g and 391.2 g of electrolyte far each case after the weight measurement. The battery charged at 2.50 V was shown to have a better cyclic performance than charged at 2.40 V, and the amounts of electrolyte loss was proportional to charge factor. After cycle test, the micro-structure of positive active material was completely changed and the corrosion layer of positive grid was about $50{\mu}m$. Failure mode of the positive plate of the gel type battery was a shedding of the positive active material, and the cause of discharge capacity decrease was found to be a electrolyte loss.
푸리에 변환을 이용한 전기화학적 임피던스 측정 시스템 제작
황의진,오상협,Hwang, Eui-Jin,Oh, Sang-Hyub 대한화학회 1991 대한화학회지 Vol.35 No.6
Electrochemical impedance measurement system using Fourier transform was constructed in the range of the frequencies up to 100 kHz. This system consists of pseudo-random noise generator, specially designed potentiostat, fast data acquisition system, system controller, and computer interface. The performance of the constructed system was found to be almost same as the commercially available system using lock-in amplifier. Measuring time was significantly reduced because the minimum time for the measurement depended on one cycle of the lowest frequency used. It would be possible to study time-varying electrochemical impedance systems such as the initial stages of corrosion processes using this system. 푸리에 변환을 이용하여 100kHz의 주파수 범위까지 사용할 수 있는 전기화학적 임피던스 측정시스템을 제작하였다. 이 시스템은 신호 발생기, 특수하게 고안된 정전위기, 고속 자료수집 장치, 시스템 제어기 및 컴퓨터 인터페이스로 구성되었다. 우리가 제작한 시스템은 lock-in amplifier를 사용하는 상품과 성능이 비슷하였다. 측정에 소요되는 최소 시간은 사용된 최적 주파수의 한 주기에 해당하므로 상당히 짧아졌다. 이 시스템을 사용하면 부식 초기와 같이 시간에 따라 변하는 전기화학적 계면현상을 임피던스 측정법으로 연구할 수 있으리라 전망된다.
용해기체 분석용 기체감응막 이온선택성 전극 (제 4 보) 관형 PVC막 pH전극을 이용한 황화이온의 연속 · 자동화 정량
이흥락,배준웅,오상협,Lee Heung Lark,Bae Zun Ung,Oh Sang-Hyub 대한화학회 1992 대한화학회지 Vol.36 No.5
황화이온검출기로서 2가지 형태의 연속 flow-through 전극계의 분석적 감응성질을 조사하고, 최적조건에서 그들의 감응특성을 직접 비교하였다. 두 검출계에 있어서 측정한 봉우리전위를 황화이온농도의 대수값과 관련지웠으며, 적어도 시간당 20개의 시료를 정량할 수 있었다. pH전극법에서는 투석기를 지나 흘러가는 recipient stream의 pH를 측정하였다. 장치는 연속흐름형의 기체투석기가 관형 polymer 막전극과 연결되도록 설계되어 있다. 이 방법의 최적실험조건은 recipient $5.0 {\times} 10^{-5} M NaOH + 5.0 {\times} 10^{-3} M$ NaCl과 diluent 0.10M $H_2SO_4$이며, recipient stream, diluent stream 및 시료의 유속은 모두 1.0ml/min이다. 황화이온 전극법에서는 시판하는 황화이온선택성 전극을 flow-through cell 속의 황화이온을 검출하는 데에 썼다. 이 방법의 최적실험조건인 황화이온 산화방지 완충제(1.0M NaOH 용액에 3.5g 아스코르브산과 7.6g $Na_2EDTA$를 용해)와 시료의 유속은 각각 1.4 ml/min와 1.0 ml/min이다. The analytical response properties of two types of continuous flow-through electrode system as fulfide ion detectors are examined and directly compared their reponse characteristics under the optimal conditions. In both detection systems, observed peak potentials are logarithmically related to the sulfide ion concentration and at least twenty samples per hour can be determined. In the pH electrode method, the pH of the flowing recipient stream leaving the dialyzer was monitored. The designed system involves the use of continuous flow gas dialyzer in conjunction with the tubular polymer membrane electrode. In this method, optimal experimental conditions are recipient of mixture of $5.0 {\times} 10^{-5} M NaOH + 5.0 {\times} 10^{-3} M$ NaCl and diluent of 0.10 M $H_2SO_4$, and all flow rates of recipient stream, diluent stream, and sample are 1.0 ml/min. In the sulfide ion electrode method, a commercially available sulfide ion-selective electrode was used to detect sulfide ion in the flow-through cell. The optimal flow rates of sulfide anti-oxidant buffer (3.5 g ascorbic acid and 7.6 g $Na_2EDTA$ dissolved in 1.0 M NaOH solution 1 l) and sample were 1.4 ml/min and 1.0 ml/min, respectively.
악취측정용 10 μmol/mol 황화수소 표준가스 개발
김용두,배현길,김달호,오상협,이진홍,이상일,Kim, Yong-Doo,Bae, Hyun-Kil,Kim, Dalho,Oh, Sang-Hyub,Lee, Jin Hong,Lee, Sangil 한국가스학회 2018 한국가스학회지 Vol.22 No.2
산업이 급속하게 발전함에 따라 자연 대기에서 악취를 유발하는 매우 적은 양의 황화수소가 존재합니다. 매립 및 하폐수처리장에서 나오는 황화수소 성분은 대기에 존재하므로 많은 민원이 발생됩니다. 민원이 발생하는 악취가스를 측정하기 위해 $10{\mu}mol/mol$ 농도 수준의 황화수소 인증표준물질(Certified reference material)을 개발하고자 하였다. 질소 안에 $10{\mu}mol/mol$ 수준의 황화수소 가스 제조는 ISO 6142에 의한 중량법을 사용하였다. 4 개의 알루미늄 실린더에 가스 CRM을 제조하고 GC-AED로 그 농도를 확인했습니다. 제조의 불확도는 0.50 % 미만이었고, 제조일치성은 0.22 %이었다. 실린더의 내부 흡착은 1500 psi에서 0.10 %이었고 1 년 동안 장기간 안정한 것으로 평가되었다. 이 황화수소 CRM의 제조 일치성, 실린더의 흡착 및 장기 안정성에 대한 상대 확장불확도는 1.05 %(신뢰도 95 %, k = 2) 이내로 개발되었다. Hydrogen sulfide from landfill and sewage treatment plant is a major odor component and causes many civil petitions. Rapidly developing industries release hydrogen sulfide, an odorous gas, to the atmosphere. This study aims to develop a $10{\mu}mol/mol$ concentration level hydrogen sulfide primary standard gas for odor measurement. The hydrogen sulfide gas was prepared at a nominal concentration of $10{\mu}mol/mol$ in nitrogen using the gravimetric method described in ISO 6142. Replicate standard gases were produced in 4 aluminium cylinders, and their concentrations were verified by GC-AED. The uncertainty of production was less than 0.50 %, and the variation of the 4 replicates was 0.22 %. The wall adsorption of hydrogen sulfide in cylinders was 0.10 % at 1500 psi, and the concentration was estimated to be long-term stable for one year. The relative expanded uncertainty of the preparation consistency, adsorption and long-term stability of this hydrogen sulfide standard gas was less than 1.05 % (95 % of confidence level, k=2).
흐름주입법에 의한 Melamine 정량을 위한 Ruthenium-Ce(IV) 시스템의 백금 나노입자 증강 화학발광
이상학 ( Sang Hak Lee ),오상협 ( Sang Hyub Oh ),김영호 ( Young Ho Kim ),( M. Mahabub Khan ),( M. Arifur Rahman ),( Al Mahmnur Alam ),( Mohammad Kamruzzaman ) 한국공업화학회 2012 응용화학 Vol.16 No.1
A chemiluminescence (CL) method is reported for the determination of melamine by flow injection analysis (FIA). This method is based on the reaction of melamine with Ru(bipy)3 2+ and Ce(IV) in presence of colloidal platinum nanopartilces to produce CL. Under optimal condition, CL intensity was linearly related with melamine concentration. The calibration curve was linear over the range of 5.0×10-9-2.0×10-6 M with the limit of detection, 9.8×10-9 M. The relative standard deviation of 1.0×10-7 M melamine was found 2.5% (n=10).