RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재후보

        평행 결합선로를 이용한 광대역 $180^{\circ}$ Bit X-대역 위상 변이기의 설계

        성규제,박현식,김동연,Sung Gyu-Je,Park Hyun-Sik,Kim Dong-Yen 한국마이크로전자및패키징학회 2005 마이크로전자 및 패키징학회지 Vol.12 No.2

        본 논문에서는 평행 결합선로를 이용하여 구조가 간단하고 광대역 특성을 갖는 $180^{\circ}$ bit X-대역 위상 변이기를 설계하고 마이크로머시닝 (micromachining) 공정을 이용하여 제작하였다. 이 위상 변이 기는 한쪽 끝이 접지된 $90^{\circ}$ 평행 결합선로와 한쪽 끝이 단락된 $90^{\circ}$ 평행 결합선로를 병렬로 연결한 구조를 갖는다. 이분법 이론에 의해 $180^{\circ}$ bit 위상 변이기에 대한설계 공식을 유도하고, 이를 적용하여 중심주파수 10GHz에서 대역폭 6GHz, ${\pm}5^{\circ}$의 위상 변이를 갖는 광대역 $180^{\circ}$ bit위상 변이기를 설계, 제작하였다. A novel, simple and broadband $180^{\circ}$ bit X-band phase shifter was proposed and fabricated in a standard micromachining process. It is composed of two $90^{\circ}$ parallel-coupled lines; one of which is shorted and the other is grounded. Design equations for the proposed $180^{\circ}$ bit phase shifter are derived by the method of even and odd mode analysis. Based on design equations, $180^{\circ}$ bit phase shifter was designed and fabricated to operate from 7 to 13 GHz with ${\pm}5^{\circ}$ of phase deviation.

      • Ka-대역 도파관 방향성 결합기의 설계

        성규제 안성산업대학교 2002 論文集 Vol.33 No.-

        In this thesis, a Ka-band 3dB waveguide directional coupler is designed using broad-call coupling slots. It is analyzed using the mode matching method and the generalized scattering parameter of the cascaded structure is calculated. The designed coupler of 24.5GHz center frequency with 500MHz bandwidth has a coupling coefficient of 3.1dB. The characteristics of isolation and return loss is lower than -20dB.

      • 도체판 결합의 유전체 대역통과 필터 설계

        성규제 안성산업대학교 2000 論文集 Vol.32 No.-

        In this thesis, the new coupling structure without coupling window between ceramic coaxial resonators is proposed to improve a process of manufacture. An elliptic bandpass filter using ceramic coaxial resonators is made on the microstrip coupling pattern. The 6-order bandpass filter of 883㎒ center frequency with 21.3㎒ bandwidth has a good agreement with the design characteristics.

      • Chip 적층 필터의 설계

        성규제 안성산업대학교 1998 論文集 Vol.30 No.2

        A chip multilayer bandpass filter is designed using planar resonators. The electromagnetic coupling structure between two planar resonators is analysed. An equivalent lumped circuit is derived to explain the behavior of the chip multilayer planar filter. A design procedure is also described. The simulated and measured results of 2-pole bandpass filters are presented.

      • 광대역 방향 탐지 안테나의 특성 분석

        성규제 한경대학교 2008 論文集 Vol.40 No.-

        This paper aims to analyze the array characteristics of mobile direction finding antennas, and the variation of antenna characteristics according to the array structures and environments. We simulate antenna patterns to design direction finding system using commercial EM simulation tools, and compare the simulated results with the measured results of fabricated direction finding antennas

      • 새로운 구조의 CRLH 전송선로 특성 분석

        성규제 한경대학교 2009 論文集 Vol.41 No.-

        The characteristics of the parallel composite right- and left-handed(CRLH) transmission lines are discussed. The dispersion relationship of both balanced and unbalanced parallel CRLH lines described, together with numerical calculations that demonstrate their potential.

      • KCI등재

        적층 Inter-Digital 공진기를 이용한 2.4 GHz 대역 LTCC 대역통과 여파기의 등가회로 설계

        성규제,Sung Gyu-Je 한국전자파학회 2005 한국전자파학회논문지 Vol.16 No.1

        본 논문에서는 적층 Inter-digital 공진기를 이용한 LTCC 대역통과 여파기의 등가회로를 제안하고, 2.4 GHz 대역의 여파기 설계에 적용하였다. 본 논문의 LTCC 적층 칩 대역통과 여파기는 평면상에서는 Comb-line 구조이고 단면상에서는 Inter-digital 구조로 구성된다. Comb-line 구조와 Inter-digital 구조의 평행 결합선로의 등가회로를 본 논문의 여파기에 적용하여 여파기 전체의 등가회로를 구성하였다. 이 등가회로는 공진기 사이의 결합 구조가 다중의 결합 구조를 갖는다. 이를 하나의 결합 구조로 통합하여 인버터를 이용한 대역통과 여파기의 설계방법을 적용하였다. 2.4 GHz 대역에서 3단의 대역통과 여파기를 설계, 제작하였다. LTCC filters have been widely used to wireless terminals. They generally adopt the multilayer structure. Some of multilayer LTCC filters are made of symmetrical parallel-coupled lines and anti-symmetrical parallel-coupled lines to reduce the length of resonators. The equivalent circuit of parallel-coupled lines was analyzed and applied to bandpass filters using multilayer parallel-coupled line resonators. The three-pole bandpass filter with the center frequency of 2.45 GHz is designed by using the proposed equivalent circuit and the measured results have good agreement with the design results.

      • KCI등재후보

        λ/4 Hair-pin 공진기를 이용한 LTCC MLC 대역통과 여파기의 설계

        성규제,여동훈 한국전자파학회 2003 한국전자파학회논문지 Vol.14 No.1

        본 논문에서는 λ/4 hair-pin 공진기를 이용한 LTCC MLC 대역통과 여파기를 제안하였다. λ/4 hair-pin 공진기는 부분적인 평행 결합선로와 그 선폭이 동일한 전송선로로 구성되어, 등가적으로 SIR이 되므로 기존의 SIR과 달리 구조적인 불연속 없이 공진기의 크기를 소형화할 수 있다. 부가적인 용량성 결합을 포함한 λ/4 hair-pin 공진기를 이용한 LTCC MLC 대역통과 여파기의 등가회로를 유도하고, 설계 절차를 기술하였다 1.8 GHz대역에서 2단의 대역통과 여파기를 설계, 제작하였다. In this paper, a λ/4 hair-pin resonator is proposed to reduce the size of resonators. A LTCC MLC bandpass filter is designed using the λ/4 hair-pin resonators. The electromagnetic coupling structure between two planar resonators is analysed. The equivalent circuit is derived to explain the behavior of the LTCC MLC bandpass filter using λ/4 hair-pin resonators. A design procedure is also described. The simulated and measured results of 1.8 GHz band 2-pole bandpass filter are presented.

      • 소형 도판관 대역통과 여파기의 CAD 설계

        성규제,박정호,윤상원,장익수 대한전자공학회 1997 電子工學會論文誌, D Vol.d34 No.9

        Waveguide bandpass filters using E-plane or H-plane discontinuities have been used in many satellite communication systems. Since the transmitter and receiver of such systems tend to be getting smaller, components such as bandpass filters must also be reduced in size. In this paper, in order to reduce the waveguide, itself, of which bandpass filters consist, double plane step waveguide discontinuities are considered. They are analyzed using the mode matching method and the genralized scattering parameter of the cascaded structure is calculated. The characteristics of the bandpass filter which is designed using the reduced size waveguide is optimized by OSA90$^{TM}$. The bandpass filter has a good characteristics and smaller size than those made of the E-plane or H-plane step discontinuities.s.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼