http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
공무원직급과 부패행태의 상호관계에 관한 연구 ; 부패감시와 집단압력을 중심으로 ( 경제학문헌목록 주제분류 : D7 )
서정환,조준모 ( Jung Hwan Seo,Joon Mo Cho ) 한국경제학회 1997 經濟學硏究 Vol.45 No.3
본 연구는 부패 적발시 압수당하는 뇌물의 비율이 감소하는 측면, 집단압력(peer pressure)이 존재하여 부패에 대한 감지도가 커지는 측면 등 한국적 부패의 고유한 측면을 부패모형에 가미하여 직급과 부패행태에 관한 상호관계에 관하여 분석한다. 기존의 부패에 관한 전통적인 모형에서 개개 총무원의 관속연수가 많을수록 동료공무원의 부패에 관한 보다 정확한 정보를 입수하게 되어 상호감독(mutual monitoring)하에서 적발될 확률이 증가한다. 따라서, 근속연 수가 많을수록 감독비용(monitoring cost)이 저감되기 때문에 보다 더 정확한 감독이 용이하고, 이에 따라 공무원은 덜 부패한다는 함의를 도출한다. 그러나 본 연구의 집단압력모형은 근속연수가 많을수록 동료의 부패에 관하여 보다 정확한 판단을 하게 되어, 실제 개개 공무원의 부패정도가 규범(norm)에 비하여 과다부패하게 되며, 부패공무원은 조직의 규범을 더 부패한 방향으로 만들기 위하여 노력하게 될 수도 있음을 암시한다. 결국 부패의 악순환적인 연결고리가 발생할 가능성이 높게 된다는 점을 시사한다. 본 연구는 부패에 관한 집단압력이 존재하고, 직급상승에 따라 여타 공무원의 부패에 대한 감지도가 증가하는 경우, 직급상승에 따라 부패가 증가하게 되는 감시기관의 부패감지도의 상한값이 집단압력이 존재하지 않는 경우의 상한값 보다 크다는 결론을 도출한다. 따라서, 한국형 부패의 고유한 측면을 부패모형에 가미할 때 부패를 방지하기 위한 감시기관의 부패감지도는 더욱 증대되어야 하며, 현재의 낮은 감지수준, 수사미진 등의 문제는 한국적 부패를 더욱 악화시킬 수 있음을 시사한다.
Polypropylene 의 중합 구조가 초미세발포에 미치는 영향
서정환(Jung-hwan Seo),차성운(Sung W. Cha) 대한기계학회 2006 대한기계학회 춘추학술대회 Vol.2006 No.11
Polypropylene is the most widely used resin. PP has good mechanical performance compared to the low resin price. PP is the representative resin, and there are many kind of PP according to the characteristics of polymerization. Microcellular plastics are polymer foams with a cell size smaller than 10㎛, comparatively much smaller that of conventional foams. Microcellular foam processing requires a cell population density greater than 10?cells/㎤ so that the fully grown cells are smaller than 10㎛. On polymerization process of PP, many kinds of PP depending on different co-monomer union could be produced easily. That is because of structure changes from arrangement of co-monomer to kinds of co-monomer. Therefore, there are so many kind of PP according to different kinds of monomer arrangement. And each kind of PP has distinctive properties that affect MCPs.
서정환(Jung Hwan Seo),서성연(Sung Yun Seo),양영성(Young Sung Yang),김규석(Kyu Suk Kim) 한국강구조학회 1994 韓國鋼構造學會誌 Vol.6 No.2
This paper is an experimental and analytical report on the ultimate strength and plastic deformation capacity of cold-formed tubular steel columns subjected to axial force and bending moment. The principal parameters in this paper are slenderness ratios(λ=30, 60, 90), the rates of axial force(P=0.2P_y, 0.4P_y, 0.6P_y) and loading conditions (monotonic and cyclic loadings). The ultimate strength of tubular steel beam-column members is evaluated by a numerical method accordance with the axial force-bending moment(N-M) interaction curves. The behavior of each specimen is displayed in the form of moment-angle of member(M-θ) relationship. The numerically obtained ultimate strength interaction curves of beam-column members show a reasonably good agreement with the available experimental results.