http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
서강일 ( Kang Il Seo ),이종복 ( Jong Bouk Lee ) 대한외상학회 2008 大韓外傷學會誌 Vol.21 No.1
Iatrogenic ureteral injury is a complication that can occur during a variety of pelvic or abdominal surgeries. The most frequent causes are gynecological ones, followed by colon and vascular surgeries. Management of ureteric injury depends on the time of diagnosis and the severity of organ damage. Injuries diagnosed intraoperatively should be treated immediately. Occasionally, intraoperative ureteral injury is overlooked, and symptoms of the late diagnosis of ureteral injury are usually nonspecific; therefore, the diagnosis is delayed for days or weeks postoperatively. Management of injuries diagnosed postoperatively is more complex. There are differing opinions on whether an initial conservative or immediate operative intervention is the best line of action. Delayed repair is suggested on the grounds that it will reduce inflammation and tissue edema. However, many authors are in favor of early repair, perhaps because tissue planes are easier to find before fibrosis becomes too dense. Ureteral injuries occurring at the level of the pelvic brim should be best managed with an end-to-end anastomosis, preferably around a ureteric stent. More distal injuries also should be ideally managed with an end-to-end anastomosis, after excision of the crushed or compromised segments. However, if the remaining distal segment is short, ureteral reimplantation is the procedure of choice. The Boari flap technique for ureteral reimplantation is invaluable in cases with a short proximal segment. Delayed recognition of iatrogenic ureteral injury may be associated with serious complications, so prompt recognition of ureteral injuries is important. Recognition of the injury before closure is the key to easy, successful, and complications-free repair. Increased awareness of the risk for ureteral damage during certain operative maneuvers is vital to prevent injury, and to decrease the incidence of iatrogenic injury. A sound knowledge of abdominal and pelvic anatomy is the best prevention.
색상선별(色相選別) 기술(技術)을 이용(利用)한 고온(高溫) 용융노(熔融爐) 이화재(而火材) 재활용(再活用)에 관(關)한 연구(硏究)
서강일,이덕희,최우진,장정훈,박은규,오용길,Seo, Kang-Il,Lee, Deok-Hee,Choi, Woo-Zin,Jang, Jung-Hoon,Park, Eun-Kyu,Oh, Young-Gil 한국자원리싸이클링학회 2011 資源 리싸이클링 Vol.20 No.1
국내의 경우 내화재는 일정 기간이 지나면 대부분 폐기 처분되고 있으며, 폐기되는 내화재의 50% 이상이 탄화되지 않은 상태이다. 본 연구에서는 내화재를 색상인식 방법으로 선별하여 재활용 가능성을 검토하였다. 선별기 광원의 색온도가 자연광에 가까운 6,500K에서 순도 97.2%의 회수물을 얻었으며, 자연광에 가까울수록 주변 광원의 간섭이 적어 선별효율이 우수한 것으로 조사되었다. 실험결과 투입 컨베이어 벨트의 속도 800 mm/sec에서 순도 98.8%, 회수율 98.1%로 조사되었으며, 시료크기 20~30 mm에서 순도 및 회수율은 각각 98.2%, 98.4%로 조사되었다. 회수물의 순도 및 선별효율은 컨베이어 벨트의 속도가 느릴수록, 시료의 크기가 클수록 향상되는 것으로 조사되었다. 그러나, 본 색상 자동선별 시스템의 처리용량 및 폐내화재의 재활용성 등을 고려할 경우 최적의 선별조건은 색온도 6,500K, 컨베이어 벨트 속도 1,000 mm/sec, 시료 크기 20mm이하인 것으로 판단된다. 카메라 해상도를 고정하고 인지 영역을 좁게 하여 시료 크기 -10 mm, 벨트컨베이어 속도 1,000 mm/sec에서 순도 97%이상, 회수율 및 선별효율이 각각 98%, 96%이상인 것으로 나타났으며, 동일해상도에서 인지영역이 좁을수록 순도 및 선별효율을 높일 수 있는 것으로 조사되었다. More than 50% of refractory materials generated from high-temperature melting furnace was not carbonized and could be recycled by adopting proper separation process. In the present work, the separation of refractory materials has studied by adopting color sorting technology to promote the recycling of waste refractory. Purity of the refractory materials was obtained with at 97.2%, color temperature of sorter light source 6,500K, which gives less interference of surrounding light source. Purity and separation efficiency were improved as size is setting bigger and lower conveyer belt speed. It is revealed that optimum conditions were color temperature 6,500K, conveyer belt speed 1,000 mm/sec, particle size -20 mm, etc. To improve purity and separation efficiency on below 10mm size, the resolution of should be fixed camera and it narrow recognition range. As a result of the study, color sorting technology could be used for separation of waste refractory materials and will contribute to promote the waste recycling.
자기누설을 이용한 구조물 내 철근 유무 판별에 관한 연구
박일환(Il Hwan Park),한재만(Jea Man Han),서강(Kang Seo),박관수(Gwan Soo Park) 대한전기학회 2008 대한전기학회 학술대회 논문집 Vol.2008 No.4
자기누설방식의 비파괴검사법은 자성체 구조물을 자화시켜 결함 구조물에서 단면적의 변화에 따른 자기 누설의 증가를 측정하여 결함 정도와 크기 등을 측정하는 비파괴검사법이다. 본 논문에서는 특히 구조물 내의 철근을 모델링하여 유한요소해석 결과와 자기누설 비파괴검사법을 이용한 측정 데이터를 비교해 보았다.