RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
        • 발행연도
          펼치기
        • 작성언어

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        PMMA를 이용한 OLED용 기판구조의 투과율 측정

        배홍섭,이일수,김도형,박종구,이형락 한국물리학회 2005 새물리 Vol.51 No.5

        Some of the light emitted by the organic material in an poly methyl meta acrylate (OLED) is totally reflected during the propagation to the front glass of the OLED due to the materials of the constituent films with high refractive indices. Consequently, the coupling-out efficiency of an OLED is just about 17 \%. If a film of low refractive index is sandwiched between the oxide layer and the glass, the coupling-out efficiency will be increased by reducing the total refraction that occurs during the propagation of light from the oxide layer to the glass. We formed a organic light emitting diode (PMMA) layer on the glass or quartz and measured the transmittance of the light. We found that the transmittance of the light was increased up to 6 $\sim$ 18 \% comparied with that of the glass. We can expect the coupling-out coefficient of OLED to be increased when a PMMA film is sandwiched between the oxide layer and the glass. PMMA (Poly Methyl Meta Acrylate) 고분자 물질의 굴절률이 유리보다 낮음을 이용하면 OLED(Organic Light Emitting Diode) 유기물질에서 나오는 빛의 전반사에 의한 소실을 막는 고투과율 박막구조를 형성할 수 있다. 분산기 (diffuser)를 통과한 빛 (He-Ne laser)을 유리에 투과시켜 위치에 따른 투과율의 변화를 측정하고, 또 PMMA가 코팅된 유리의 PMMA층 쪽으로 투과 시킨 빛의 위치에 따른 투과율의 변화를 측정하여 비교해 본 결과 PMMA가 코팅된 경우가 전체적인 투과율에서 시료의 상태에 따라 6 $\sim$ 18 \%정도 향상되는 것을 관찰하였다. 이 실험결과는 굴절률이 낮은 고분자 박막을 이용하면 OLED 디스플레이 기판구조에서 투과성을 향상시킬 수 있음을 보여주고 있다.

      • KCI등재

        산화철 나노입자에서 Oleic Acid 코팅이 나노입자의 보자력에 미치는 영향

        배홍섭,이일수,홍성욱 한국물리학회 2012 새물리 Vol.62 No.2

        Iron oxide (Fe_3O_4) nanoparticles were synthesized by using the coprecipitation method. In TEM images, the nanoparticles were spherical in shape with an average diameter of 7 nm. Some of these nanoparticles were coated with oleic acid. The size distribution of the coated particles was determined by using dynamic light scattering. The average diameter of the coated particles was 130 nm with a standard deviation of 45 nm. The hysteresis curves of powder samples of bare and coated nanoparticles at various temperatures were obtained by using a VSM (vibrating sample magnetometer). Below the blocking temperature, the coercive force decreased as the temperature increased for both samples. However, the magnitude of the coercive force for the bare sample at all temperatures was larger than that of the coated sample. This can be attributed to fewer dipole-dipole interactions for the coated sample due to the larger interparticle distance. The coercive force for both samples showed a T^1/2 power law dependence at temperatures between 2 K and 60 K. 산화철 (Fe_3O_4) 나노입자를 공침방법에 의해 형성하였다. TEM (Transmission Electron Microscope)으로 관찰한 결과 나노입자는구형이었으며 직경이 약 7 nm이었다. 이 나노입자를 oleic acid로코팅하였으며 코팅된 나노입자의 크기분포는 DLS (Dynamic Light Scattering)로 관찰하였다. 코팅한 나노입자의 직경의 평균은 130 nm였고표준편차는 45 nm이었다. 코팅에 따른 자기적 특성변화를 보기 위해 VSM (vibrating sample magnetometer)을 이용하여 온도에 따른자기이력곡선을 구하였다. Blocking 온도 이하에서 보자력은 온도가증가함에 따라 감소함을 볼 수 있었고, 모든 온도에서 코팅하지 않은분말시료에서의 보자력이 코팅한 분말시료에서의 보자력보다 큼을 볼 수있었다. 이는 코팅한 시료에서는 코팅에 의해 나노입자사이의 거리가멀어져 쌍극자-쌍극자 상호작용이 줄어든 결과로 보자력이 작아졌다는것을 나타낸다. 두 시료 모두 2 K에서 60 K 사이에서는 보자력의 온도에따른 변화는 T^1/2의 관계가 성립함을 보여주었다.

      • KCI등재

        Enhancement of the CIGS Solar Cell’s Efficiency by Anti-reflection Coating with Teflon AF

        배홍섭,김찬,이일수,조현준,김대환,홍성욱 한국물리학회 2014 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.65 No.10

        An anti-reflection (AR) layer of Teflon AF was deposited on the front surface of a Cu(In,Ga)Se2(CIGS) solar cell with a structure of grid/TCO/ZnO/CdS/Cu(In,Ga)Se2/Mo/glass by using thespin coating method. This AR layer reduced the front-surface reflection, which resulted in highefficiency for the CIGS solar cell. The thickness of the Teflon AF layer was varied to determine thethickness that gave the highest transmittance of incident light into the active absorber of the CIGSsolar cell. The optimum thickness of the Teflon AF layer was found to be 105 nm. CIGS solar cellswith a Teflon AF layer of 105 nm were constructed, and their efficiencies were compared with thoseof solar cells without a Teflon AF layer. The average increase in the relative efficiency of the solarcells was 2.63% due to the inclusion of an anti-reflection layer of Teflon AF.

      • Ag(001) 표면에 성장시킨 Ni 초박막의 구조 연구

        邊大鉉,裵洪燮 弘益大學校 科學技術硏究所 1995 科學技術硏究論文集 Vol.6 No.-

        The LEED(Low Energy Electron Diffraction) I/V analyses implied the possibilities of disordered sub-surface alloying instead of Ni/Ag(001). Ag/Ni/Ag(001), or Ag/Ag/Ni/Ag(001) structures. After annealing this system at 620K, the Ni Auger signal was reduced rapidly. This means that the Ni atoms on the surface were diffused into the bulk Ag(001) and made alloy in part. According to the tensor LEED analyses, Ag/Ag/Ag/Ni/Ag(001) was the best fitting structure. The Auger analyses showed that Ni atoms on the surface started to diffuse above 470K, which implies exsistance of diffusion barrier.

      • 디지털방송에서 복수의 스토리라인을 가진 인터랙티브 프로그램의 구현

        배홍섭(Hongseod Bae),정문열(Moonryul Jung) 한국정보과학회 2003 한국정보과학회 학술발표논문집 Vol.30 No.2Ⅱ

        본 논문은 디지털방송 환경에서 시청자가 적극적으로 스토리 전개에 개입하여 스토리라인을 바꿀 수 있는 복수의 스토리라인(multi-storyline)을 가지는 인터랙티브 프로그램의 구현을 목적으로 한다. 시청자는 방송을 시청하는 도중 리모콘으로 방송의 스토리전개를 선택할 수 있으며 이는 기존 아날로그방송에서는 불가능한 새로운 유형의 연동형 데이터방송 프로그램(enhanced service)이다. 이는 국내 디지털 위성방송 표준인 DVB-MHP방식으로 세계 최초로 구현한 것으로 이를 응용해 A/V방송제작자와 데이터방송 애플리케이션 (application)제작자는 보다 다양한 연동형 데이터방송 프로그램을 기획, 제작할 수 있고 시청자는 기존의 방송에서 보지 못했던 새로운 시각적, 적극적인 시청 경험을 하게 된다.

      • KCI등재

        Cube-shaped Triethylene Glycol-coated Ni-Mn Ferrite Nanoparticles for use as 2 Contrast Agents in Magnetic Resonance Imaging

        정혜원,배홍섭,김찬,이일수 한국물리학회 2019 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.74 No.1

        Nickel-manganese (NiMn) ferrite nanoparticles were synthesized using the hydrothermal technique and were coated with the biocompatible material of triethylene glycol (TEG) during the synthetic process. The chemical composition of the particles was Ni0:5Mn0:5Fe2O4 based on the use of inductively coupled plasma (ICP). The shapes of the particles were cubic in the TEM images and had an average side length of 68 nm. The XRD patterns conrmed the inverse spinel structure of these particles. The FTIR spectra also showed the rm coating of the TEG on the surfaces of these particles. The saturation magnetization of the particles was observed to be 66 emu/g with a coercive force of 150 Oe. The T1 and T2 relaxivities of the hydrogen protons in the aqueous dispersion of the particles were 0.32 and 15.59 mM1s1, respectively. The ratio of r2/r1 was 48.72, thus indicating that the Ni0:5Mn0:5Fe2O4 nanoparticles are applicable as high-ecacy T2 contrasts agents in MRI.

      • KCI등재

        소상공인 정부지원서비스 및 소상공인 심리적 특성이 사업지속의도에 미치는 영향에 관한 실증연구

        배혜경,배홍섭,정호석,정기수 한국IT정책경영학회 2023 한국IT정책경영학회 논문지 Vol.15 No.1

        본 연구는 소상공인에 대한 정부지원서비스 및 소상공인의 심리적 특성 요인에 대한 심도 있는 연구를 통해 소상공인이 지속적인 사업활동을 영위하기 위해 필요한 요인이 무엇인지 밝히고 소상공인의 경쟁력을 갖추도록 하는 방안을 모색하여 도움을 주는데 목적이 있다. 분석결과, 소상공인 정부지원서비스 및 심리적 특성 요인 모두 사업지속의도에 긍정적인 유의미한 영향을 미치는 것으로 검정하였으며, 특히 소상공인 정부지원서비스의 자금지원 요인이 사업지속의도에 가장 높은 영향관계를 나타내었다.

      • KCI등재

        Teflon-AF를 이용한 OLED용 기판 구조의 투과율 상승 효과 측정

        이일수,배홍섭,박종구,이형락,김도형 한국물리학회 2006 새물리 Vol.53 No.6

        The coupling-out efficiency of an organic lightemitting diode (OLED) can be greatly enhanced by sandwiching a low refractive index film between the glass and the ITO (indium tin oxide) layer. Due to this sandwiched film the total reflection is greatly reduced, consequently, a higher transmittance is achieved. We used Teflon AF (amorphous fluoro-polymer) to form a thin film of about 1 $\mu$m in thickness on a glass substrate. The position-dependent transmittances of the laser light passing through the bare glass and through the glass with a Teflon AF film were obtained by using both a photometer and a CCD camera. These data showed that the light transmittance for the glass with a Teflon AF film was about 15 \% higher than that of the bare glass. OLED(Organic Light Emitting Diode)의 기판구조에서 저굴절의 Teflon-AF(Amorphous Fluoro-polymer, AF2400 n = 1.29, AF1600 n = 1.31)막을 ITO와 유리 사이에 끼워 넣음으로써 전반사 현상에 의한 빛의 손실을 크게 줄일 수 있다. 약 1 $\mu$m 두께의 Teflon AF막을 입혔을 경우의 투과율을 CCD 및 광도계로 측정한 결과 유리 (bare glass)에서의 투과율보다 약 15 \%정도 증가하는 것을 관찰하였다. 이러한 막구조를 OLED 구조에 적용할 경우 발광효율을 크게 개선할 수 있을 것으로 기대된다.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼