금속쐐기와 기능강화동적쐐기의 조사야 주변부 선량 비교

박종민,김희정,민제순,이제희,박찬일,예성준,Park, Jong-Min,Kim, Hee-Jung,Min, Je-Soon,Lee, Je-Hee,Park, Charn-Il,Ye, Sung-Joon 한국의학물리학회 2007 의학물리 Vol.18 No.3

방사선 방호의 측면에서 기능강화동적쐐기가 금속쐐기에 비하여 가지는 이점을 평가하기 위하여 각각의 쐐기에서 산란되는 조사야 주변부 선량을 측정하였다. 측정 장비는 2D Array를 사용하였고 장비의 신뢰성을 검증하기 위하여 측정값과 치료계획장치에서 계산된 결과를 비교하였다. $15^{\circ},\;30^{\circ},\;45^{\circ},\;60^{\circ}$의 금속쐐기와 기능강화동적쐐기를 사용하였을 때에 선원표면간거리를 80 cm에서 90 cm로 변화시키며 조사야 주변부의 선량백분율을 측정하였다. 광자선의 에너지는 6 MV와 15 MV를 사용하였다. 측정은 0.5 cm 깊이에서 조사야 경계로부터 1 cm부터 5 cm까지 1 cm 간격으로 이루어졌다. 열형광선량계를 사용하여 절대 선량을 측정하였다. 2D Array를 사용하여 측정하였을 경우, 기능강화동적쐐기를 사용하였을 때의 조사야 주변부 선량백분율($1.4%{\sim}11.9%$)이 금속쐐기를 사용하였을 때($2.5%{\sim}12.4%$)에 비하여 낮았다. 15 MV의 에너지를 사용했을 경우에 6 MV의 에너지를 사용했을 경우보다 조사야 주변부 평균 선량백분율이 2.9% 높았다. 선원표면간거리가 80 cm일 경우에 90 cm일 경우보다 선량백분율의 차이를 분명히 확인할 수 있었다. 쐐기의 Heel 방향의 선량백분율이 Toe방향의 선량백분율보다 평균적으로 0.9% 낮았다. 열형광선량계를 이용한 절대 선량 측정에서도 2D Array를 사용하여 측정한 경우와 합치하는 결과가 나왔다. 기능강화동적쐐기는 임상에서 조사야 주변부의 정상조직에 불필요하게 산란되어 전달되는 선량을 감소시켜준다. 이러한 이점은 쐐기의 각도가 증가하고 선원표면간거리가 감소할수록 더욱 부각된다. In order to evaluate the radio-protective advantage of an enhanced dynamic wedge (EDW) over a physical wedge (PW), we measured peripheral doses scattered from both types of wedges using a 2D array of ion-chambers. A 2D array of ion-chambers was used for this purpose. In order to confirm the accuracy of the device we first compared measured profiles of open fields with the profiles calculated by our commissioned treatment planning system. Then, we measured peripheral doses for the wedge angles of $15^{\circ},\;30^{\circ},\;45^{\circ},\;and\;60^{\circ}$ at source to surface distances (SSD) of 80 cm and 90 cm. The measured points were located at 0.5 cm depth from 1 cm to 5 cm outside of the field edge. In addition, the measurements were repeated by using thermoluminescence dosimeters (TLD). The peripheral doses of EDW were (1.4% to 11.9%) lower than those of PW (2.5% to 12.4%). At 15 MV energy, the average peripheral doses of both wedges were 2.9% higher than those at 6MV energy. At a small SSD (80 cm vs. 90 cm), peripheral dose differences were more recognizable. The average peripheral doses to the heel direction were 0.9% lower than those to the toe direction. The results from the TLD measurements confirmed these findings with similar tendency. Dynamic wedges can reduce unnecessary scattered doses to normal tissues outside of the field edge in many clinical situations. Such an advantage is more profound in the treatment of steeper wedge angles, and shorter SSD.

항통을 주소로 내원(來院)한 크론병(Chron's disease) 호전 1례

박종민,김호준,금동호,박영회,이명종,Park, Jong-Min,Kim, Ho-Jun,Keum, Dong-Ho,Park, Young-Hoi,Lee, Myeong-Jong 척추신경추나의학회 2010 척추신경추나의학회지 Vol.5 No.1

항통을 주소로 내원한 환자의 크론병에 대한 침구(鍼灸)치료로 복통 및 설사의 관해 상태가 되는 양호한 효과를 얻었기에 보고하는 바이다. 다만, 치료 기간이 짧아 증상의 변화의 추적이 필요한 상태이며, 다양한 임상적 연구를 위한 임상사례 데이터가 축적되어야 할 것으로 사료된다. Objective: This study evaluated the effects of Oriental treatments on one patient who was diagnosed to Crohn's disease. Methods: One patient was diagnosed as Crohn's disease by physician. We used acupuncture and moxibustion at 曲池(LI11), 天樞(S25), 足三里(ST36), 合谷(LI4) and (GL25), 2 times per week about one month. We analyzed the change symptom by Crohn's disease activity index(Harvey-Bradshaw index) before and after treatment. Results: After treating acupuncture and moxibustion in the case, We found out that the Crohn's disease activity index score was significantly improved after treatment. First the number of liquid or very soft stool was decreased to 2 times a day and the stools became more solid condition. The abdominal pain and use of anti-diarrhea medication score came to none. The well being score set slightly below poor condition. Conclusions: These result suggest acupuncture, moxibustion were effective to Crohn's disease clinical symptom. These could help patient ordinary life by reducing abdominal pain and diarrhea.

침수피해에 의한 벼 감수량 추정기법 개발

박종민,김상민,성충현,박승우,Park , Jong-Min,Kim , Sang-Min,Seong, Chung-Hyun,Park, Seung-Woo 한국농공학회 2004 한국농공학회논문집 Vol.46 No.5

The amount of rice yield reduction due to inundation should be estimated to analyse economic efficiency of the farmland drainage improvement projects because those projects are generally promoted to mitigate flood inundation damage to rice in Korea. Estimation of rice yield reduction will also provide information on the flood risk performance to farmers. This study presented the relationships between inundated durations and rice yield reduction rates for different rice growth stages from the observed data collected from 1966 to 2000 in Korea, and developed the rice yield reduction estimation model (RYREM). RYREM was applied to the test watershed for estimating the rice yield reduction rates and the amount of expected average annual rice yield reduction by the rainfalls with 48 hours duration, 10, 20, 50, 100, 200 years return periods.

2002년도 고품질 쌀 생산대책

박종민,Park Jong Min 한국관개배수위원회 2001 한국관개배수논문집 Vol.8 No.2

농업협동조합 개혁

박종민,Park Jong Min 한국관개배수위원회 2004 한국관개배수논문집 Vol.11 No.2

봇넷 탐지를 위한 네트워크 세션 분석

박종민,Park, Jong-Min 한국정보통신학회 2012 한국정보통신학회논문지 Vol.16 No.12

최근의 사이버 공격은 경쟁사에 대한 DDoS(Distributed Denial of Service)공격과 기밀정보 유출, 일반 사용자들의 금융정보 유출 광고성 스팸메일의 대량 발송 등 불법 행위를 통해 경제적 이득을 취하려는 형태로 바뀌어가고 있다. 그 중심에 있는 봇넷은 봇이라 불리는 감염된 호스트들의 네트워크로서 최근 발생하는 많은 사이버 공격에 이용되고 있다. 이러한 봇넷은 수많은 변종과 다양한 탐지 회피 기술로 무장하고 전 세계 네트워크 전반에 걸쳐 그 세력을 확장해 가고 있다. 하지만 현존하는 봇넷 대응 솔루션은 대부분 시그네처 기반 탐지 방법을 이용하거나, 극히 제한적인 지역의 봇넷를 탐지하고 있어, 총괄적 봇넷 대응에는 미흡한 것이 현실이다. 본 논문에서는 봇넷을 제어하기 위해 사용되는 IRC(Internet Relay Chat) 통신 세션에서 서버와 연결하는 채널과의 관계 분석을 통하여 봇에 감염된 호스트와 연결된 IRC서버 채널을 탐지하는 방법을 제안한다. In recent years, cyber crimes were intended to get financial benefits through malicious attempts such as DDoS attacks, stealing financial information and spam. Botnets, a network composed of large pool of infected hosts, lead such malicious attacks. The botnets have adopted several evasion techniques and variations. Therefore, it is difficult to detect and eliminate them. Current botnet solutions use a signature based detection mechanism. Furthermore, the solutions cannot cover broad areas enough to detect world-wide botnets. In this paper, we propose IRC (Internet Relay Chat) that is used to control the botnet communication in a session channel of IRC servers connected through the analysis of the relationship of the channel and the connection with the server bot-infected hosts and how to detect.

종이성형구조물의 휨강성에 대한 실험적 연구

박종민,이명훈,Park, Jong-Min,Lee, Myung-Hoon 한국포장학회 1999 한국포장학회지 Vol.5 No.2

Top-to-bottom compression strength of corrugated fiberboard boxes is partly dependent on the load-carrying ability of the central panel areas. The ability of these central areas to resist bending under load will increase the stacking strength of the box. The difference of box compression strengths, among boxes which are made with identical dimensions and fabricated with same components but different flute sizes, is primarily due to difference of the flexural stiffness of the box panels. Top-to-bottom compression strength of a box is accurately predicted by flexural stiffness measurements and the edge crush test of the combined boards. This study was rallied out to analyze the flexural stiffness, maximum bending force and maximum deflection for various corrugated fiber-boards by experimental investigation. There were significant differences between the machine direction (MD) and the cross-machine direction (CD) of corrugated fiberboards tested. It was about 50% in SW and DW, and $62%{\sim}74%$ in dual-medium corrugated fiberboards(e.g. DM, DMA and DMB), respectively. There were no significant differences of maximum deflection in machine direction among the tested fiberboards but, in cross direction, DM showed the highest value and followed by SW, DMA, DMB and DW in order. For the corrugated fiberboards tested, flexural stiffness in machine direction is about $29%{\sim}48%$ larger than cross direction, and difference of flexural stiffness between the two direction is the lowest in DMA and DMB.

0.1 MW급 연소후 습식아민 CO₂ 포집 Test Bed 공정개선효과 검증

박종민,조성필,임태영,이영일,Park, Jong Min,Cho, Seong Pill,Lim, Ta Young,Lee, Young ill 한국전력공사 2016 KEPCO Journal on electric power and energy Vol.2 No.1

Carbon Capture and Storage technologies are recognized as key solution to meet greenhouse gas emission standards to avoid climate change. Although MEA (monoethanolamine) is an effective amine solvent in $CO_2$ capture process, the application is limited by high energy consumption, i.e., reduction of 10% of efficiency of coal-fired power plants. Therefore the development of new solvent and improvement of $CO_2$ capture process are positively necessary. In this study, improvement of $CO_2$ capture process was investigated and applied to Test Bed for reducing energy consumption. Previously reported technologies were examined and prospective methods were determined by simulation. Among the prospective methods, four applicable methods were selected for applying to 0.1 MW Test Bed, such as change of packing material in absorption column, installing the Intercooling System to absorption column, installing Rich Amine Heater and remodeling of Amines Heat Exchanger. After the improvement construction of 0.1 MW Test Bed, the effects of each suggested method were evaluated by experimental results.

도시민 농촌정주 지원 시책 추진현황

박종민,Park, Jong-Min 한국관개배수위원회 2007 한국관개배수논문집 Vol.14 No.1

Pocket PC기반의 효율적인 한글 정합 시스템 구현

박종민,조범준,Park Jong-Min,Cho Beom-Joon 한국정보통신학회 2004 한국정보통신학회논문지 Vol.8 No.7

전자 잉크 데이터는 펜 기반 컴퓨터나 PDA(Personal Digital Assistants)둥에서 자연스럽고 편리한 데이터 입력을 제공하기 위해 펜으로 입력한 데이터를 온라인 문자 인식기를 이용하여 아스키 문자로 변환하지 않고 스크립트 형태로 저장하는 데이터를 말한다. 전자 잉크 데이터를 사용하기 위해 가장 중요한 것 중 하나는 전자 잉크 데이터의 검색 문제이다. 본 연구에서는 전자 잉크 데이터를 획 특징 벡터 형태로 저장하고, 이를 이용해서 잉크 데이터를 검색하는 정합 알고리즘을 제안하고 구현하였다. 제안된 정합 알고리즘은 입력된 데이터를 곡률을 이용하여 기본획으로 분리하고 기본획의 종류를 결정한 다음 획 특징 벡터를 생성한다. 그리고 동적 프로그래밍 기법에 의해 획 특징 벡터의 거리값을 계산한다. Electronic Ink is a stored data in the form of the handwritten text or the script without converting it into ASCII by handwritten recognition on the pen-based computers and Personal Digital Assistants(Pocket PC) for supporting natural and convenient data input. One of the most important issues is to search the electronic ink in order to use it. We proposed and implemented a script matching algorithm for the electronic ink. Proposed matching algorithm separated the input stroke into a set of primitive stroke using the curvature of the stroke curve. After determining the type of separated strokes, it produced a stroke feature vector. And then it calculated the distance between the stroke feature vector of input strokes and one of strokes in the database using the dynamic programming technique.