http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박인성 ( Park Insung ),김하림 ( Kim Harim ),이학주 ( Lee Hak-ju ),김도형 ( Kim Do-hyung ),민윤기 ( Min Yoon-gi ),조훈희 ( Cho Hunhee ) 한국건축시공학회 2021 한국건축시공학회지 Vol.21 No.3
미군 공사는 국내 공사와 설계기준과 수행절차 등이 상이하기때문에 설계변경의 원인과 영향도 등도 다른 양상을 보인다. 본 연구는 100억 이상 규모 총 24건의 미군공사에서 발생한 721건의 설계변경 자료와 164명의 미군공사참여자 설문을 바탕으로 미군공사의 설계변경 원인과 그 영향도를 분석하였다. 미군공사에서 중요한 설계변경 요인은 설계 오류에 의한 설계 관련 변경(348건, 48.3%), 발주자 요구(86건, 11.9%), 상이한 현장 상태(69건, 9.6%)로 밝혀졌다. 또한, 설계변경으로 인해 평균 6.56%의 공사비 증가와 계약공기 대비 21.1%의 공기연장이 발생하였다. 본 연구의 결과로 국내 건설사에는 군 시설의 접근성 및 제한성으로 인해 부족할 수 있는 미군공사의 설계변경 및 공사성과의 전반적 이해도를 향상을 기대한다. 이를 바탕으로 향후 미군시설공사의 발전적 방향을 제시할 수 있는 후속 연구를 제안한다. Change orders that occur frequently during the construction phase, affect the construction performance in terms of cost, time, quality, safety and environment, and place a huge burden for stakeholders of given projects. This study analyzed the causes of change orders and their impact on the basis of 721 cases and a questionnaire of 164 domestic U.S. military construction participants in a total of 24 U.S. military projects. Important factors for change orders in the US military construction projects were engineering change due to design errors (348 cases, 48.3%), user requests change(86 cases, 11.9%), and different site conditions (69 cases, 9.6%). In addition, due to the change orders, construction cost increased by 6.56% on average and construction period was extended by 21.1% compared to the original schedule. As a result, it is anticipated that domestic construction companies can obtain a better understanding of change orders and construction performance, which may be difficult due to accessibility and limitations to military facilities. Also, it is proposed a successor study that guides in the right direction for the U.S. Military Construction.
박희원(Huiwon Park),임인성(Insung Ihm) 한국정보과학회 2002 정보과학회논문지 : 시스템 및 이론 Vol.29 No.7·8
그래픽스 하드웨어가 급속도로 발전해왔음에도 불구하고, 복잡한 전경을 실시간으로 렌더링하는 것은 중요한 문제로 남아 있다. 최근 이미지 기반 렌더링에 대한 연구가 활발히 진행되면서 렌더링 후 3차원 와핑에 기반을 둔 렌더링 기법들이 제시되었다. 이러한 방법들은 좋은 결과를 산출하지만, 적지 않은 계산량을 요구하며, 또한 3차원 그래픽스 가속기 상에서 구현하기가 어렵기 때문에, 실시간 문맥에 사용하기가 용이하지가 않다. 본 논문에서는 이러한 문제를 해결하기 위하여 투영 텍스춰 기법에 기반을 둔 3차원 와핑을 통한 실시간 렌더링 기법을 제시한다. 이 방법에서는 복잡한 물체를 약간의 시간 차이를 두고 렌더링한 두 장의 참조 영상을 원래의 모델을 단순화시킨 물체에 각각 투영하여, 그 결과 영상을 혼합함으로써, 중간 시간에 대하여 원래의 물체를 렌더링한 것과 같은 우수한 화질의 영상을 빠르게 생성할 수 있다. 이 기법은 3차원 게임이나 가상 현실과 같은 실시간 그래픽스 응용 소프트웨어를 개발하는데 유용하게 쓰일 수 있을 것이다. Due to the recent development of graphics hardware, real-time rendering of complex scenes is still a challenging task. As results of researches on image based rendering, the rendering schemes based on post-rendering 3D warping have been proposed. In general, these methods produce good rendering results. However, they are not appropriate for real-time rendering since it is not easy to accelerate the time-consuming algorithms within graphics subsystem. As an attempt to resolve this problem of the post-rendering 3D warping technique, we present a new real-time scheme based on projective texture. In our method, two reference images obtained by rendering complicated objects at two consecutive points of time are used. Rendering images of high quality for intermediate points of time are obtained by projecting the reference images onto a simplified object, and then blending the resulting images. Our technique will be effectively used in developing real-time graphics applications such as 3D games and virtual reality software and so on.
이원용,임봉수,박인성,Lee, Wonyong,Lim, Bongsu,Park, Insung 한국물환경학회 2017 한국물환경학회지 Vol.33 No.4
This study was to estimate the reduction effect of nonpoint source pollutants according to the rainfall intensity and drainage of infiltration grate inlet. Soil infiltration flow was measured on-site and SS load by the filter part was calculated by the experimental data in laboratory reactor test. Soil infiltration flow was measured to be about $1m^3/hr$ in soil condition saturated with water. The filter part of the infiltration grate inlet was a hydraulic equipment unhindered by soil infiltration on the bottom of the storage tank, because the infiltration flow was measured to be about $3m^3/hr$ continuously in the closing infiltration hole condition. Infiltration flow and SS load were over about $1m^3/hr$ and 1.71 kg according to laboratory results by the filter part using the artifical sample. Therefore, the above values could be presented as the limitted value to start the reduction of filtration effect. Reduction efficiencies of SS load by the filter part for the rainfall intensity were about 87 % at 5 mm/hr and about 61 % at 10 mm/hr in consideration of one infiltration grate inlet got the drainage area about $200m^2$. The reduction efficiency of nonpoint source pollutants was very effective in the first flush rainfall. However, the reduction efficiency by rainfall density was higher than by flow.