http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박승훈,이정훈,김성우,임재환,류지열,Park, Seung-Hun,Lee, Jung-Hoon,Kim, Sung-Woo,Lim, Jae-Hwan,Ryu, Jee-Youl 한국정보통신학회 2012 한국정보통신학회논문지 Vol.16 No.6
In this research, we propose a momentum measurement system using the accelerometer sensor, MCU, and Bluetooth to measure the exact momentum. The proposed system can figure out information for the real time travel distance. We performed various experiments, and analyzed the results using the proposed momentum measurement system. In the simulation experiments, we compared the reliability and accuracy for the existing momentum measurement systems from the analyzed results. The proposed system showed travel distance error of less than 8% as compared to the existing system with the error of approximately 13%. We expect that the proposed system apply to the commercial products. 본 연구에서는 정확한 운동량 측정을 위하여 가속도 센서, MCU, 그리고 블루투스를 이용한 운동량 측정 시스템을 제안한다. 이러한 시스템은 실시간 무선으로 이동거리 정보를 정확하게 측정할 수 있다. 제작한 운동량 측정 시스템을 이용하여 다양한 모의실험을 하였고, 그 결과를 분석하였다. 분석한 결과를 기성품과 신뢰성 및 정확도에 측면에서 비교를 하였다. 본 연구에서 제안하는 시스템은 13% 정도의 이동거리 오차를 가지는 기성품에 비해 8%이하의 우수한 오차를 보였다. 이러한 시스템은 소형화되어 기성품에 적용되리라 기대한다.
박승훈(Park Seung Hoon),김중헌(Joongheon Kim) 한국통신학회 2021 한국통신학회 학술대회논문집 Vol.2021 No.2
본 논문에서는 이미지 분야 딥러닝에서 훈련에 필요한 데이터의 부족으로 인한 모델 결과의 편향성을 평준화하는 기법인 데이터 증폭 기법으로 CutMix, CutOut, Mixup, Mosaic에 대해서 다루며, 해당 기법들이 모델의 결과에 어느정도 영향을 미치는지에 대해서 소개한다.
건물 부하를 포함한 바닥 난방 시스템 모델 제안 및 제어목적 파라미터 최적화 방안
박승훈(Seung Hoon Park),장용성(Yong Sung Jang),김의종(Eui-Jong Kim) 대한설비공학회 2018 설비공학 논문집 Vol.30 No.8
Floor heating has been used as a typical heating system in residential buildings, particularly in Korea. Several studies have been conducted on the systems especially for optimal control, since the control of the systems is not trivial for their high thermal capacities. This study also proposes a method for modeling floor-heating systems for their control. A lumped thermal-resistance (R) and heat-capacity (C) model is proposed, and an optimization method is combined to maintain accuracy in a low-order model scheme. The parameters of the RC model are set as unknownvalues, and the PSO (particle swarm optimization) method is used to fit the model to the reference results, which show that the proposed model is in good agreement with the reference and with previously developed models.
저탄소 녹색도시성장을 위한 패시브 하우스 활성화 방안 연구
박승훈 ( Seung Hoon Park ),김명희 ( Myung Hee Kim ) 한국지역사회발전학회(구 한국지역사회개발학회) 2013 地域社會開發硏究 Vol.38 No.2
국제적으로 에너지 및 환경문제에 직면한 많은 나라들이 친환경적이고 지속성장 가능한 도시개발에 관심을 갖고, 이를 위해 탄소배출을 줄이고 에너지를 아끼기 위한 노력을 해오고 있다. 세계의 많은 나라들은 화석연료의 소비를 줄이고, 건물과 같은 도시의 물리적 환경의 에너지 효율성을 높이는데 관심을 두고 있다. 국내에서도 저탄소 녹색도시 조성을 위해 친환경 건축물 인증 및 에너지 인증과 같은 친환경 정책을 수립하여 왔다. 본 연구는 저탄소 녹색도시 및 패시브 하우스와 같은 친환경 건축물의 개념을 살펴보고, 이와 관련된 국내·외 해외정책들을 살펴보았다. 첫째, 도시계획에 기반을 둔 저탄소 녹색도시 정책은 건축분야의 친환경 건축물에 대한 정책내용을 포함하고 있지 않다. 이러한 사실은 친환경에 관한 정책수립에 있어서 도시계획 및 건축분야의 학문적 융합이 필요함을 나타내고 있다. 더불어 패시브 하우스와 같은 친환경 건축물의 활성화를 위해 다양한 인센티브 제도가 필요하다고 판단된다. Under the situation of international energy and environmental problems, cities in the world have been interested in eco-friendly and sustainable urban development and have strived to reduce carbon emission and save energy. They have focused on reducing fossil fuel consumption and improving the energy efficiency of the built environment, especially buildings. In Korea, the Central Government set up eco-environmental policy such as Green Building Certification and Energy Certification in order to build low-carbon green city in the fields of architecture and urban planning. This paper aims to identify the definition of the low-carbon green city and the green building(i.e., passive house) and review their policies. First, this research shows that urban planning-based environmental policy such as low-carbon green city does not range over the Green Building Certification. This study suggests the need of integrating urban planning and architecture in establishing eco-environmental policies and strategies. Second, various incentive methods should be developed and required to actively promote passive house.
24시간 활동성 혈압과 임상 혈압과의 비교 및 좌심실 비대와의 상관관계
박승훈 ( Seung Hoon Park ),방덕원 ( Duk Won Bang ),서존 ( John Seo ),홍성욱 ( Sung Wook Hong ),김도회 ( Do Hoi Kim ),윤여준 ( Yeo Joon Yoon ),안지훈 ( Ji Hoon Ahn ),현민수 ( Min Su Hyon ),김성구 ( Sung Koo Kim ),권영주 ( Young Jo 대한내과학회 2007 대한내과학회지 Vol.72 No.2
목적: 고혈압을 진단함에 있어 24시간 활동성 혈압 측정이 임상 혈압 측정보다 정확하다고 알려져 있지만, 아직까지 국내에서는 24시간 활동성 혈압과 임상 혈압의 관계에 대한 연구는 드문 실정이다. 본 연구는 24시간 활동성 혈압과 임상 혈압을 비교하고, 심전도에서의 좌심실 비대와의 연관성을 알아보고자 하였다. 방법: 혈압 평가를 의뢰받고 항고혈압제재의 복용력이 없는 건강한 성인 203명(남 108, 여 95)을 대상으로 임상 혈압을 3회 측정 후 평균치를 구하였고, 24시간 활동성 혈압을 측정하였다. 24시간 활동성 혈압 중 낮시간 평균 혈압을 임상 혈압과 비교분석하였다. 이들 환자의 심전도를 검사하여 V1의 S파의 전압 크기와 V5의 R파의 전압 크기를 합하여 각 혈압과의 상관관계를 조사하였다. 결과: 전체 대상군의 낮시간 활동성 혈압의 평균은 수축기 혈압 135.33±13.73 mmHg, 이완기 혈압 86.55±11.42 mmHg였고, 임상 혈압의 평균은 수축기 혈압 140.10±17.41 mmHg, 이완기 혈압 88.84±10.14 mmHg로 임상 혈압이 낮시간 활동성 혈압보다 수축기 혈압은 5 mmHg, 이완기 혈압은 2 mmHg 정도 높았다(p<0.001). 임상 혈압의 고혈압 기준치를 140/90 mmHg라고 할 때 여기에 상관된 낮시간 활동성 혈압의 예측치는 135/87 mmHg였다(p<0.001). 임상 혈압 측정에서 고혈압으로 진단된 군 중에서 24시간 활동성 혈압 측정이 정상으로 나온 백의 고혈압(isolated office or white-coat)의 발생률은 10.8%였다. 심전도에서의 전압크기는 24시간 활동성 혈압 중 낮시간 수축기 혈압, 이완기 혈압과 밤시간 수축기 혈압, 이완기 혈압과 모두 유의한 양의 상관관계를 보였으며, 특히 낮시간 수축기 혈압과 가장 높은 상관관계를 보였다(r=0.283, p<0.001). 결론: 임상 혈압과 24시간 활동성 혈압간에 유의한 차이가 있었고, 낮시간 활동성 혈압의 정상 상한치는 135/87 mmHg였으며, 심전도에서 좌심실비대를 반영하는 좌심실 전압의 크기는 24시간 활동성 혈압 중 낮시간 수축기 혈압과 가장 높은 상관관계를 보였다. Background: This study compared the results of 24 hour ambulatory blood pressure monitoring with the clinical blood pressure measurements, and we investigated the relationship of the blood pressure measurement and left ventricular hypertrophy, as determined by routine 12 lead electrocardiography. Methods: We studied 204 healthy adults with no prior history of heart disease or antihypertensive medication. The clinic blood pressure was measured 3 times and the average was taken. We compared the clinic blood pressure with the daytime blood pressure of the 24 hour ambulatory blood pressure monitoring, and we compared the blood pressure with the sum of the voltage of the S wave on V1 and the R wave on V5. Results: The average of the daytime ambulatory blood pressure of all the patients was 135.33±13.73 mmHg for the systolic pressure and 86.55±10.14 mmHg for the diastolic pressure. The average of the clinic blood pressure measurement was 140.10±17.41 mmHg for the systolic pressure and 88.84±10.14 mmHg for the diastolic pressure. The clinic blood pressure averaged higher than the daytime ambulatory blood pressure by 5 mmHg on the systolic pressure and 2 mmHg on the diastolic pressure (p<0.001). The normal ambulatory blood pressure limits were estimated as those that best correlated with 140/90 mmHg at the clinic. The estimated value was 135/87 mmHg for the daytime ambulatory blood pressure (p<0.001). The incidence of white coat hypertension was 10.8%. The sum of the voltage on electrocardiography showed a positive linear relationship with all the blood pressure measurements. The daytime systolic blood pressure showed the strongest correlation with the 24 hour ambulatory blood pressure monitoring (r=0.283, p<0.001). Conclusions: We found a linear relation and we analyzed the differences between the clinical and 24 hour ambulatory blood pressure. A daytime ambulatory blood pressure value of 135/87 mmHg was a suitable upper normal limit for the corresponding cutoff value of the clinic blood pressure. Left ventricular hypertrophy showed the strongest relationship with the daytime systolic blood pressure among the results of the 24 hour ambulatory blood pressure monitoring. (Korean J Med 72:181-190, 2007)