http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
프런트 엔드 쿨링팩 일체형 냉각 모듈의 성능평가에 관한 연구
성기천(Gi-Cheon Sung),이재영(Jae-Young Lee),김종기(Jong-Ki Kim),이홍열(Hong-Yeol Lee),김종철(Jong-Chul Kim),박정상(Jeong-Sang Park),김화성(Hwa-Sung Kim) 한국자동차공학회 2005 한국자동차공학회 춘 추계 학술대회 논문집 Vol.2005 No.11_3
This study was performed the performance evaluation of integrated cooling module for front end cooling pack system. It was found the optimal geometry of integrated fin to reduce the heat conduction from the radiator to the condenser. The integrated fins have been applied to the radiator and the condenser. Numerical comparison of the performance is also made with that of the conventional separated fin. The heat capacity and pressure drop characteristics have been experimentally studied for the separated and integrated module. The results obtained indicate that the heat transfer performance of radiator is increased by 13%, outlet temperature of evaporator is decreased by 32% compared with those of the conventional separated module.
박성기 ( Park Seong Gi ),최재식 ( Choe Jae Sig ),이상화 ( Lee Sang Hwa ),이호인 ( Lee Ho In ) 한국공업화학회 2003 공업화학 Vol.14 No.5
La_(1-x)Sr_(x)CoO₃ (x=0.0, 0.2, 0.4, 0.6)계 페롭스카이트형 산화물을 산소전극 촉매로 이용한 알칼리형 연료전지의 산소환원 반응에 대하여 연구하였다. Temperature-programmed reduction/oxidation (TPR/TPO) 기법을 통하여, 페롭스카이트 구조내의 격자산소의 거동을 조사하였다. 연료전지의 전류 밀도는 x=0.2일 때 가장 높은 값을 보였으며, x=0.2, 0.4, 0.0, 0.6의 순서로 감소하였다. TPR 실험에서는, 사용된 모든 페롭스카이트 산화물이 650 K 부근의 α 피크과 700 K 부근의 β 피크를 보였으며, TPO 실험의 경우는 넓은 온도범위에 걸친 단일 피크가 나타났다. 각 페롭스카이트들의 환원반응과 재산화 반응의 활성화에너지를 Arrhenius plot을 통하여 구하였으며, TPR의 α 피크에 해당하는 환원반응의 활성화에너지가 작을수록 연료전지에서의 전류밀도는 크게 나타났다. 이로부터, TPR의 α 피크와 연관이 있는 격자산소가 연료전지의 산소환원 반응에 참여하는 활성종임을 알 수 있었다. The oxygen reduction in alkaline fuel cell was studied with La_(l-x)Sr_(x)CoO_(3) (x = 0.0, 0.2, 0.4, 0.6) perovskite-type oxides as oxygen electrode. The behavior of lattice oxygen of perovskite structure was examined by temperature-programmed reduction/oxidation(TPR/TPO) method. The maximum current density was occurred at x = 0.2 and decreased by the order of x = 0.2, 0.4, 0.0, and 0.6. In TPR experiments, all the perovskites gave a peak at about 650K and βpeak at about 700 K, while a broad single peak was observed in TPO experiment. Activation energies of reduction and re-oxidation of perovskites were calculated by Arrhenius plot. The smaller the activation energy of TPR a peak, the larger the current density of fuel cell suggesting that the lattice oxygen for TPR a peak is the active species for oxygen reduction in alkaline fuel cell.
라텍스개질 콘크리트의(LMC)의 강도특성 및 배합인자 결정방법
박성기,원종필,박찬기,Park, Sung-Ki,Won, Jong-Pil,Park, Chan-Gi 한국농공학회 2008 한국농공학회논문집 Vol.50 No.5
This study are decided the mix proportion method of latex modified concrete for agricultural concrete structures from the results of workability and strength test with mix proportion factor. For mix proportion factor, this study are selected the water-cement ratio, unit cement amount and latex content. Also, this study were performed the slump, compressive strength test and microstructure analysis using the scanning electron microscope(SEM). The strength and slump of LMC are dependent with unit cement amount, latex content, and water-cement ratio. Especially, the strength of LMC are not controlled by single mix proportion factor but effected by combined mix proportion factor. Microstructure investigation are showed the LMC are reduced the internal pore volume and enhanced the transition zone between cement paste and aggregate interface. This effect get by consist of latex films in the concrete. Also, this study were recommended the mix proportion method for LMC. These mix proportions method are estimated the mix design for satisfied the target performance which are applied the agricultural concrete structure.
TiNi/6061Al 복합재료의 인장특성에 미치는 열처리의 영향
박성기,신순기,이준희,Park, Sung-Ki,Shin, Soon-Gi,Lee, Jun-Hee 한국재료학회 2003 한국재료학회지 Vol.13 No.1
The 1.6 vol% and 2.5 vol% TiNi/6061Al composites were fabricated by permanent mold casting for investigating the effect of heat treatment on tensile strength for composites. The tensile strength without T6 treatment at 293 K was increased with increasing the volume fraction of TiNi fiber and at 363 K the higher the pre-strain, the higher the tensile strength. The tensile strength of the composite with $T_{6}$ treatment at 293 K was found to increase with increasing both the amount of pre-strain and the volume fraction of TiNi fiber and was higher than that without $T_{6}$ treatment. It should be noted that the tensile strength 2.5vol%TiNi/6061Al composites rolled at a 38% reduction ratio was the maximum value of 298 MPa. The tensile strength of composites decreased with increasing the reduction ratio over 38% because of the rupture of TiNi fiber.
LMC(Latex Modified Concrete)의 염소이온 확산 특성
박성기,원종필,박찬기,Park, Sung-Ki,Won, Jong-Pil,Park, Chan-Gi 한국농공학회 2008 한국농공학회논문집 Vol.50 No.4
It is most serious problem which is various occurs from the agricultural concrete structure and off shore concrete structure the problem which it comes to think is deterioration of the concrete which is caused with the corrosion of the reinforcing steel which is caused by with permeation of the water and the sea water. Specially the off shore concrete structure has been deteriorated by the steel reinforcement corrosion. The latex modified concrete(LMC) was adds latex in the plain concrete as the latex has increase the durability of concrete. This study were accomplished to the estimate the diffusion coefficient of LMC, and the time dependent constants of diffusion. The average chloride diffusion coefficient was estimated. Also, the average chloride diffusion coefficient was compared with diffusion coefficient test results of 28 curing days. The test results indicated that the average chloride diffusion coefficient could closely estimate the test results of the diffusion coefficient test results of 28 curing days.
국가건설기준인 농업용 콘크리트댐 설계기준 개정 방안 연구
차상선 ( Sang-sun Cha ),박성기 ( Sung-ki Park ),유찬 ( Chan Yu ),신현오 ( Hyun-oh Shin ),박찬기 ( Chan-gi Park ),이백 ( Baeg Lee ) 한국농공학회 2022 한국농공학회 학술대회초록집 Vol.2022 No.-
국가설계기준인 농업용 댐 설계기준 중 콘크리트댐 설계기준은 콘크리트댐설계(KDS 67 10 25), 콘크리트중력댐설계(KDS 67 10 30) 및 콘크리트아치댐설계(KDS 67 10 35)로 구분되어 있다. 농업용 댐 콘크리트댐설계기준은 1989년 12월에 농업생산기반정비사업 계획설계기준 콘크리트댐편이 제정되어 2018년 코드화로 개정되기 전까지 내용적 측면에서 개정되지 않았다. 따라서 농업용 댐 설계기준의 조사(KDS 67 10 15), 계획(KDS 67 10 10), 필댐(KDS 67 10 20) 등과 댐설계기준(KDS 54 00 00)의 콘크리트 댐관련 기준(KDS 54 50 00, KDS 54 70 00) 등과 상충성, 중복성이 있어 개정의 필요성이 증가하였다. 또한 공통기준인 구조설계기준(KDS 14 00 00)의 콘크리트 구조설계기준과 표준시방서 구조재료공사(KCS 14 00 00)의 콘크리트 공사 기준은 지속적으로 개정되어 왔으나 농업용 댐 콘크리트댐 관련설계기준은 이를 충분히 반영하지 못하였다. 따라서 2022년 농업용 댐 설계기준의 콘크리트댐 관련 설계기준의 개정방향은 농업용 댐 설계기준 내 다른 설계기준과 댐설계기준, 콘크리트구조설계기준(설계기준), 콘크리트공사(표준시방서)와의 중복성, 상충성 문제를 해결하고 실무에서 적용되고 있는 설계기술을 반영하는 것으로 설정하였다. 농업용 댐 콘크리트댐설계기준(KDS 67 10 25)의 내용은 농업용 댐 설계기준의 조사(KDS 67 10 15)와 계획(KDS 67 10 10)편으로 이동 반영하여 농업용 댐내에서 상충성 및 중복성을 해결하고자 하였다. 그리고 KDS 67 10 25 코드는 최근 농업용 댐 설계에 반영이 논의 되고 있는 콘크리트표면차수벽형 석괴댐의 내용으로 제정하였다. 콘크리트표면차수벽형 석괴댐의 설계기준은 한국농어촌공사 조사설계실무요령과 댐설계기준의 콘크리트표면 차수벽형 석괴댐 설계기준(KDS 54 40 00)을 기본으로하여 제정하였다. 농업용 댐 콘크리트중력댐과 아치댐 설계기준은 국가건설기준에서 설계기준 작성 요령에 따라 누락된 항목 등을 보완하여 개정하였으며, 타설계기준의 중복성, 상충성을 해결하고 신기술을 반영하여 설계하는 것으로 개정방향을 설정하였다.