식품안전관리인증기준 적용 여부에 따른 급식시설의 소독 실태 분석

박민서,이혜연,배현주,Park, Min-Seo,Lee, Hye-Yeon,Bae, Hyun-Joo 한국급식외식위생학회 2021 급식외식위생학회지 Vol.2 No.2

This study was conducted to compare and evaluate the difference in washing and disinfection when the Hazard Analysis and Critical Control Point (HACCP) protocol was applied to foodservice operations. The results of the survey were as follows: Among the 116 foodservice operations surveyed, 67.2% were HACCP-compliant and 32.8% were not HACCP-compliant. Also, 62.9% served meals once daily, and 79.3% conducted food safety education once a month. Compared to HACCP non-compliant foodservice operations, the disinfection performance of HACCP-compliant operations was significantly better concerning worktables (p<0.001), food inspection tables (p<0.001), preparation tables for distribution (p<0.01), serving tables (p<0.01), overflow and trenches(p<0.05), sinks (p<0.05), and insect attracting lamps (p<0.01). Similarly, the disinfection performance of HACCP-compliant foodservice operations was significantly better for 18 cooking utensils and personal tools such as food slicers (p<0.001), multiple cooking machines (p<0.05), tray carts (p<0.001), stainless steel tools (p<0.001), rubber gloves (p<0.05). Worktables (45.1%), serving tables (29.6%), sinks (37.0%), and scales (21.6%) were most often disinfected 'at the end of each task', while food inspection tables (36.5%), food preparation tables for distribution (31.2%), dish machines (34.2%), overflow and trenches (25.7%), and floors (25.8%) were most often disinfected 'once a day'. All cooking utensils were most often disinfected 'at the end of each task'. 'Chemical disinfection' was most frequently used in all foodservice facilities. To improve the food safety management of foodservice operations, it is necessary to apply the HACCP protocol and comply with the washing and disinfection manual.

이중관을 이용한 부분 무치악 환자의 수복 증례

박민서,김형섭,권긍록,우이형,배아란,Park, Minseo,Kim, Hyeong-Seob,Kwon, Kung-Rock,Woo, Yi-Hyung,Pae, Ahran 대한치과보철학회 2016 대한치과보철학회지 Vol.54 No.1

국소의치 수복에서는 의치 장착에 의한 잔존 조직의 위해를 최소한으로 억제하는 것이 중요하다. 잔존 구강조직에 위해를 가하는 첫 번째 요인은 잔존치 및 치조제의 기능력 부담이며 두 번째는 구강 위생관리 부족에 의한 영향이다. 이중관을 활용한 국소의치는 rigid support를 통해 치조제에 미치는 부담을 경감시킬 수 있으며, 외관과 의치부에 부착되는 치태 및 침착물을 구강 외에서 쉽고 확실하게 관리할 수 있다. 또한 내관인 지대치 역시 모든 방향에서 청소가 용이해 변연 치은의 건강에 유리하다. 본 증례에서는 심한 치조골 흡수 및 불량한 구강 위생관리를 보이는 부분 무치악 환자에서 이중관을 이용한 국소의치로 상, 하악을 수복하여 기능과 심미, 구강 위생 관리 측면에서 만족할 만한 결과를 얻을 수 있었다. In removable dental prostheses, it is important to minimize impairment of residual tissue caused by wearing dentures. There are two factors that harm residual tissue. The first is functional load bearing of remaining teeth and alveolar ridges and the second is the effect of poor oral hygiene. Double crown retained removable dental prostheses provide rigid support, and it may reduce impairment caused by load bearing of alveolar ridges. Also, dental plaque and oral deposits, which are attached to outer crowns and dentures, can be easily managed extra-orally. In addition, it is beneficial to the health of the marginal gingiva because inner crowns have easy access for oral hygiene. In this case, double crown retained removable dental prostheses were used for the partially edentulous patient with severe residual alveolar bone resorption and poor oral hygiene, and the result was clinically satisfactory in terms of functional, esthetical, and oral hygiene aspects.

공기-분말 연마와 구연산의 적용시간에 따른 임프란트 표면 거칠기의 변화에 관한 주사탐침현미경적 연구

박민서,정진형,임성빈,Park, Min-Seo,Chung, Chin-Hyung,Lim, Sung-Bin 대한치주과학회 2000 Journal of Periodontal & Implant Science Vol.30 No.4

The Peri-implantitis causes inflammation of periodontal tissue and bone loss. It contaminates surface of implants. Therefore, guided bone regeneration has been used for the treatment of this disease. For the reosseointegration of the exposed surface, various mechanical and chemical methods have been used for cleaning and detoxication of implant surface. Among these methods, air-powder abrasive and oversaturated citrate are known to be most effective. However, these treatments may deform implant surface. In this research, changes of surface roughness they were examined. 10 experimental machined titanium cylinder models were fabricated to be used for control groups. Each of them was air powder abraded for 1 minute and they were named group 1. And then, group 1 were burnished with cotton pellets soaked with citrate for 30 seconds(Group 2), 1 minute(Group 3), 3 minutes(Group 4), and 5 minutes(Group 5) burnishing were applied for grouping respectively. Each group were examined with SPM, and their surface roughness were measured and analyzed. 1. Surface roughness of titanium decreased when it was air-powder abraded for 1 minute. It was statistically significant. 2. When Air-powder abraded titanium were treated with citrate for 3 minutes, Their surface roughness was the lowest. Titanium treated for 1 minute was the second lowest and 30 seconds was the third and titanium burnished for 5 minutes was the highest. 3. Surface roughness of titanium which was treated with citrate was decreased till 3 minutes, which was statistically significant. There was no statistical significance from 30 seconds to 1 minute and from 1 minute to 3 minutes, and there was statistical significance from 30 seconds to 3 minutes. 4. Oxide layer was formed when titanium is exposed to air, and it was removed when air-powder abraded. It was made when treated with citrate. It is thought that citrate treatment is necessary after the air-powder abrasion, and 1 minute is clinically and qualitatively adequate for burnishing time of citrate.

풍량측정장치(FMS)의 응용실무

박민서,Park, Min-Seo 한국설비기술협회 1991 설비 : 공조ㆍ냉동ㆍ위생 Vol.8 No.9

잎 두께와 수분함유량에 따른 손실판 방식 RCS 계산의 정확성 검증

박민서(Minseo Park),김한중(Han-Joong Kim),엄귀섭(Kwiseob Um),박신명(Sin-Myong Park),권순구(Soon-Koo Kweon),오이석(Yisok Oh) 한국전자파학회 2014 한국전자파학회논문지 Vol.25 No.11

본 논문에서는 손실판(resistive sheet) 방식을 사용하여 풀잎이나 나뭇잎의 후방 산란 레이더 단면적(RCS: Radar Cross Section)을 계산하고, 이 모델의 정확성을 검증하여, 손실판 모델을 적용하여 계산 가능한 잎의 두께를 제시한다. 이를 위해 잎을 손실 있는 유전체 판으로 가정하고, 이 유전체 판을 resistive sheet(손실판)으로 대체한 후에 판의 두께, 유전율, 주파수에 따른 resistivity를 계산한 후에, PO(Physical Optics) 방식을 이용하여 다양한 크기와 두께 조건에서 RCS를 계산하였고, 이 계산 결과를 상용 시뮬레이터를 사용한 FEM(Finite Element Method) 방식의 수치해석 계산 결과와 비교하였다. 이 비교 결과에 의하면 유전체 판의 두께가 커질수록 오차가 증가하였으며, 예를 들어, 주파수 9.6 GHz에서 유전율이 21.4+9.7i이고, 잎 두께가 1.2 mm일 때 0.1 dB의 오차가 발생하였고, 3 mm일 때 3.74 dB의 오차가 발생하였다. 또한, 유전율이 높아질수록 이 모델 사용 가능한 최대 두께가 증가하는 경향을 보였다. 이 연구는 원격탐사 연구에서 수많은 잎이 분포되어 있을 때에 그 잎들의 산란 특성을 산란모델을 이용하여 계산하는 데에 유용하게 사용될 것이다. The accuracy of the resistive-sheet technique in calculating the RCS(Radar Cross Section) of a deciduous leaf is examined in this paper for various thicknesses and dielectric constants, and a range of thicknesses for the resistive sheet technique is proposed. At first, a leaf was assumed to be a lossy dielectric disk, and the dielectric disk was again assumed to be a resistive sheet with an appropriate resistivity for a given thickness, a dielectric constant, and a frequency. Then, the RCS of the leaf was computed using the physical optics(PO) method, and was compared with the calculation results of a numerical analysis: i.e., a commercial tool based on the FEM (Finite Element Method) technique. It was shown that the error increases as the thickness increases. The error was 0.1 dB, for example, when the thickness is 1.2 mm and 3.7 dB when the thickness is 3 mm with a dielectric constant of(21.4, 9.7) at 9.6 GHz. It was also found that the error decreases as the dielectric constant increases. This study will be very useful for calculating the scattering characteristics of numerous leaves in a vegetation canopy for estimating its radar backscatter using scattering model.

헬스케어에 인공지능 기술의 적용 및 확대

박민서(Park, Min Seo) 한국비즈니스학회 2021 비즈니스융복합연구 Vol.6 No.4

신기종 전륜 8속 자동변속기 인풋샤프트의 비틀림 피로 수명 평가에 대한 연구

박민서(Minseo Park),심현(Hyun sim),송현근(Hyunkeun Song),허재행(Jaehaeng Heo),박근태(Keuntae Park) 한국자동차공학회 2022 한국자동차공학회 학술대회 및 전시회 Vol.2022 No.11

The Input shaft of the front-wheel 8 speed automatic transmission(A/T) is one of the key components of the driving system that drives the vehicle by receiving engine power for the first time inside the A/T, and it is also one of the most weakness components since the torque converter transmits peak torque generated by the engine suction-compression-explosion-exhaust cycle. The new front wheel 8 speed A/T, developed by the company, first applied the existing integrated input shaft as separation type for the purpose of downsizing including shortening the entire length according to the customers request. The purpose of this study is to analyze the correlation between structural differences and fatigue damage index by evaluating the fatigue life of the input shaft through a single torsional fatigue durability evaluation for the new 8 speed A/T input shaft.

고령화사회의 노인취업실태와 바람직한 방향

박민서(Min Seo Park) 한국사회정책학회 1998 한국사회정책 Vol.5 No.1

국내외 디지털 문화유산 프로젝트의 활용 사례

박민서(Min Seo Park),최연화(Yeon Hwa Choi),임순범(Soon-Bum Lim) 한국콘텐츠학회 2008 한국콘텐츠학회지 Vol.6 No.2

다양한 접지면 형태에 따른 표면파 전파에 관한 기초연구

박민서(Minseo Park),이정해(Jeong-Hae Lee) 한국전자파학회 2015 한국전자파학회논문지 Vol.26 No.10

본 논문에서는 배열 안테나 설계 시 격리도의 문제를 야기시키는 표면파에 관한 기초적인 연구를 진행하였다. 마이크로스트립 패치 안테나의 표면파와 유사한 환경에서 모의실험을 진행하기 위해 접지된 유전체 평판(grounded dielectric slab) 모델을 사용하였으며, DGS, PMC, Soft 표면, Hard 표면 등 다양한 접지면 형태에 따른 표면파 전파에 대해 모의실험을 진행하였다. 모의실험 결과에 의하면 TM-wave 입사 시 DGS의 경우 25 % 정도의 전파 차단 효과가 나타났으며, PMC와 Soft 표면의 경우 95 % 이상의 전파를 차단하는 결과를 나타내었다. 이 연구는 격리도 향상을 통한 배열안테나의 이득 증대에 유용하게 사용될 것이다. In this paper, the surface wave that caused the isolation problem when the design of the array antenna is studied. The grounded dielectric slab model is used in order to simulate in the similar environment with the surface wave of the microstrip patch antenna. The propagation of the surface wave on the various types of grounds which are defected ground structure(DGS), perfect magnetic conductor(PMC), Soft-surface, and Hard-surface is simulated. As a result, 25 % power is blocked by the DGS when the TM-wave incident. Also, 95 % power is blocked by the PMC and Soft-surface. This study will be very useful to increase the gain of an array antenna by improving the isolation between the antenna elements.