http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박규대,김성룡,정현옥,김경민,임정혁,이주원,이성구,이재흥 한국고분자학회 2015 Macromolecular Research Vol.23 No.4
The expanded graphite intercalated compound (xGIC)/pressure sensitive adhesives (PSAs) were prepared bysyrup process and in situ process. The effects of xGIC filler on the morphology and property of acrylic resin basedUV-crosslinked PSA were investigated. The xGICs showed more uniform dispersion in acrylic matrix and thedegree of filler connection was more prominent in the syrup process than in situ process. The peel strength and tackinessof UV-crosslinked PSAs were strongly dependent on the amount of the filler and the peel strength decreasedwith increasing xGIC. The thermal conductivity of PSAs was explained in terms of filler dispersion, wetting, andmatrix infiltration. The thermal conductivity of PSA was 0.46 W/mK by adding 20 wt% of xGIC, which was 287%improvement compared to the unfilled PSA. It is speculated that 2-dimensional xGIC fillers effectively formed thethermal pathway.
박규대,김환용 원광대학교 대학원 2009 論文集 Vol.42 No.-
In this paper, both circularly polarized patch antenna and modified loop antenna were investigated for ultra high frequency of 908.5MHz-914MHz radio frequency identification systems adopted to reader and transponder, respectively. The CP characteristics for reader antenna was realized by using truncation at the edge of patch and the bandwidth of resonance frequency was also enhanced with longer distance between ground plane and radiating patch. Futhermore, overall patch size was reduced to 1.73 times owing to narrow slit consist of inductance component at the radiating patch on RF-4 substrate with dielectric constant of 4.4 materials. The measurements results of fabricated prototype shows that antenna gain of 7.9dBi, 3dB beam width at radiation pattern of 87° and 105° for vertical and horizontal directions, respectively, with 15dB front-to-back ratio. The results shows that the proposed antenna features a compact size, wide impedance bandwidth, moderate gain, and excellent axial ratio. This antenna is well suitable for the applications in RFID readers.
Acrylic acid를 첨가한 광확산 렌즈용 공중합체의 내열 특성 연구
박규대,엄재원,김영근,박동협 한국공업화학회 2016 한국공업화학회 연구논문 초록집 Vol.2016 No.1
LED 광원의 방열기술, 광학 설계 기술은 광 효율과 에너지 절감을 결정하는 핵심적인 인자이며, 더불어 고출력 LED 광원의 시각적 효과를 높이고 에너지 절감을 유도하기 위한 광확산 렌즈 소재에 대한 기술적 관심이 고조되고 있다. 일반적으로 고출력 LED용 렌즈로 광투과율과 내열 특성이 우수한 PC가 사용되고 있으나, 고온환경에서 황변현상으로 인하여 LED 모듈의 수명이 급격히 저하되는 문제점이 발생하고 있다. 본 연구에서는 내열 특성이 개선된 광확산 렌즈를 얻기 위해 PMMAPIBMA 기반으로 하여 acrylic acid(AA), methacrylic acid(MAA)가 각각 적용된 공중합체를 합성하였으며, AA와 MAA의 함량 변화가 내열 특성 및 광투과율에 미치는 영향을 연구하였다.
박규대,김대훈,김영근,박동협 한국공업화학회 2016 한국공업화학회 연구논문 초록집 Vol.2016 No.1
광학용 소재로 PMMA 수지는 광투과율, 내후성, 성형 가공성이 우수하기 때문에 광고용 간판, 조명용 커버, 자동차 부품 등의 산업 분야에 응용되어 왔으나, 내열성이 취약하여 아직까지 적용의 한계성이 있다. 이를 개선하기 위해 공중합체 제조 후 추가반응을 유도하여 내열성을 향상시키는 기술이 시도하고 있지만, 후처리 과정이 길고 생산비용이 높아져 대량 생산에는 용이 하지 않다. 본 연구에서는 PMMA 소재를 기반으로 하여 광학적 특성과 내후성은 유지하면서 내열특성을 개선하기 위한 연구를 진행하였다. PMMA 기반의 삼원 공중합체를 합성하였으며, MAAM의 함량 변화가 내열성, 광투과율, 내황변 특성에 미치는 영향에 대해 연구하였다.