http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
다중 주파수 발생기 설계를 위한 인젝션 락킹 현상 연구
정승현,민경한,이선규,정진원,이승대 한국전자통신학회 2019 한국전자통신학회 논문지 Vol.14 No.6
This study describes Injection locking phenomena for multi-frequency generator design. Describe the basic theory of Injection locking phenomenon and conduct a single Injection locking experiment based on it. The input signal used a Howland current source and Constructed the circuit using a Colpitts oscillator. We confirmed that when each injection signal (840KHz, 500KHz) is injected into each oscillator, the oscillator is settled vibrating at the frequency of the injection signal. Through the results of the above experiment, it is confirmed that injection locking phenomena can be applied to the design of the Multi-frequency generator. 본 논문에서는 다중 주파수 발생기의 설계를 위한 단일 인젝션 락킹 현상에 대한 연구를 진행한다. 다중 주파수 발생기 설계를 위하여 인젝션 락킹 현상에 대한 기본적인 이론을 서술하고 이를 토대로 단일 인젝션 락킹 실험에 대하여 서술한다. 실험은 인젝션 신호에 비해 불안정하게 진동하는 발진기에 일정하게 진동하는 안정된 신호인 인젝션 신호를 인가하는 방식으로 진행하였다. 인젝션 신호는 홀렌드 전류원을 사용하고 콜피츠 발진기를 사용하여 회로를 구성하였다. 실험결과 각각의 인젝션 신호(840KHz, 500KHz)를 주입하였을 때 각각의 발진기가 안정하게 진동하는 것을 확인하였다. 위의 단일 인젝션 락킹 실험결과를 통하여 다중 주파수 발생기 설계에 인젝션 락킹 현상을 응용 할 수 있음을 확인하였다.
J. CHUNG,민경한,M. SUNWOO 한국자동차공학회 2016 International journal of automotive technology Vol.17 No.4
This paper proposes a real-time empirical model of NOx emissions for diesel engines. The proposed model predicts the level of NOx emissions using an empirical model developed based on the thermal NO formation mechanism, the extended Zeldovich mechanism. Since it is difficult to consider the exact physical NO formation phenomena in real-time applications, the proposed algorithm adapts the key factors of the NO formation mechanism from the extended Zeldovich mechanism: temperature of the burned gas, concentration of the gas species, and combustion duration where NO is generated. These factors are considered in a prediction model as four parameters: exhaust gas recirculation rate (EGR rate), crank angle location of 50 % of mass fraction burned (MFB50), exhaust lambda value, and combustion acceleration. The proposed prediction model is validated with various steady engine experiments that showed a high linear correlation with the NOx emission measured by a NOx sensor. Furthermore, it is also validated for transient experiments.
다중 주파수 발생기 설계를 위한 단일 인젝션 락킹 현상에 관한 연구
정승현(Seung-Hyeon Jeong),민경한(Kyeong-Han Min),이선규(Seon-Gyu Lee),정진원(Jin-Won Jeong),이승대(Seung-Dae Lee) 한국전자통신학회 2019 한국전자통신학회 논문지 Vol.14 No.6
본 논문에서는 다중 주파수 발생기의 설계를 위한 단일 인젝션 락킹 현상에 대한 연구를 진행한다. 다중 주파수 발생기 설계를 위하여 인젝션 락킹 현상에 대한 기본적인 이론을 서술하고 이를 토대로 단일 인젝션 락킹 실험에 대하여 서술한다. 실험은 인젝션 신호에 비해 불안정하게 진동하는 발진기에 일정하게 진동하는 안정된 신호인 인젝션 신호를 인가하는 방식으로 진행하였다. 인젝션 신호는 홀렌드 전류원을 사용하고 콜피츠 발진기를 사용하여 회로를 구성하였다. 실험결과 각각의 인젝션 신호(840kHz, 500kHz)를 주입하였을 때각각의 발진기가 안정하게 진동하는 것을 확인하였다. 위의 단일 인젝션 락킹 실험결과를 통하여 다중 주파수 발생기 설계에 인젝션 락킹 현상을 응용 할 수 있음을 확인하였다. This study describes injection locking phenomena for multi-frequency generator design. For the design of the multi-frequency generator, we describe the basic theory of injection locking phenomenon and conduct a single injection locking experiment based on it. The experiments was conducted by applying injection signals that vibrates consistently to oscillators which vibrates unstablely compared to injection signals. Injection signal was applied using a Howland current source and circuit was designed using a Colpitts oscillator. The results of the experiment showed that each oscillator oscillates reliable when injection signals(840kHz, 500kHz) are injected. Through the results of a single injection locking experiment, it is confirmed that injection locking phenomena can be applied in the design of the multi-frequency generator.