http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김홍현 ( Kim Honghyun ),고원희 ( Goh Wonhui ),변정안 ( Byun Jungan ),지광습 ( Zi Goangseup ) 한국구조물진단유지관리공학회 2019 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.23 No.1
This research provides techniques for the implementation of an integrity evaluation system developed for wind turbine structures to jack-up barge. The strain values obtained from the upper tip of the footing are to be converted into values at a single point in order to represent the structural behavior. These obtained values are evaluated simultaneously through P-M curve, generated by FEM results. Evaluating loads with P-M curve, structural stability of barge could then be monitored.
KBIMS 건축 및 구조 부재 라이브러리 및 IFC 속성명 변환 방법 개발
김선우 ( Kim Seonwoo ),김선중 ( Kim Sunjung ),김홍현 ( Kim Honghyun ),배기우 ( Bae Kiwoo ) 한국건축시공학회 2020 한국건축시공학회지 Vol.20 No.6
본 연구는 KBIMS가 적용된 건축 및 구조 부재 형상과 속성데이터가 포함된 BIM 라이브러리를 구축하는 방법과, 속성데이터 변환 과정의 문제를 해결하여 KBIMS IFC 파일로 변환하는 방법을 제시한다. 프로젝트에서 다양한 BIM 도구가 활용되어짐에도 불구하고 라이브러리 연구에 특정 도구가 주로 활용되었는데 본 연구에서는 클라우드 기반 데이터베이스 통합플랫폼에 포함된 카티아V6를 활용하여 주요 12개 카테고리, 총 793개의 건축 및 부재 형상 및 수치 라이브러리를 개발했다. KBIMS IFC 속성 입력 과정에서 데이터 타입과 특수문자 속성명으로 인한 데이터베이스 입력 제한을 파악하였다. 입력 가능한 데이터 타입을 찾아 입력하고, 아스키코드를 활용한 특수문자 속성명 대체 입력 방법을 개발했다. 변환기 프로토타입을 개발하여 추출된 IFC 파일을 KBIMS 원래 속성명이 포함된 IFC 파일로 변환하고 시범모델을 활용하여 검증하였다. 본 연구 결과는 실제 프로젝트에서 KBIMS 적용시 BIM 도구의 선택의 폭을 넓히고, 프로젝트 데이터 호환문제를 줄이는데 도움을 줄 것이다. 마지막으로 KBIMS 라이브러리의 지속적인 활용을 위해서는 관련 조직 간의 유지 관리 방안에 대한 논의가 필요하다. This research introduces the method of developing Korea BIM standard (KBIMS) architectural and structural element library and the methodology of converting KBIMS IFC property names with special characters. Diverse BIM tools are utilizing in project, however BIM library researches lack diversity on BIM tool selection. This research described the method to generate twelve categories and seven hundred and ninety-three elements library containing geometrical and numerical data in CATIA V6. KBIMS has its special property data naming systems which was the challenge inputting to ENOVIA IFC database. Three mapping methods for special naming characters had been developed and the ASCII code method was applied. In addition, the convertor prototype had been developed for searching and replacing the ASCII codes into the original KBIMS IFC property names. The methodology was verified by exporting 2,443 entities without data loss in the sample model conversion test. This research would provide a wider choice of BIM tool selection for applying KBIMS. Furthermore, the research would help on the reduction of data interoperability issues in projects. The developed library would be open to the public, however the continuous update and maintenance would be necessary.
지하수 히트펌프 시스템의 지중 환경관리를 위한 시추 슬라임의 원핵생물 유전자 다양성
김희정 ( Heejung Kim ),이시원 ( Siwon Lee ),박정희 ( Junghee Park ),전원탁 ( Won-tak Joun ),김재연 ( Jaeyeon Kim ),김홍현 ( Honghyun Kim ),이강근 ( Kang-kun Lee ) 한국미생물생명공학회(구 한국산업미생물학회) 2016 한국미생물·생명공학회지 Vol.44 No.4
지하수의 열을 이용한 히트펌프 시스템에서는 열 효율 유지를 위한 클로깅 현상이 고려되어야 한다. 클로깅 현상은 토양·지하수 환경에서 이화학적 요인 외에도 미생물학적 요인으로 발생한다. 이번 연구에서는 안정적인 지하수 열원 냉난방 시스템 운영을 위하여, 대수층 수위강하의 영향을 받지 않는 지하 10 미터 지점에서 불교란 시추 슬라임의 초기상태 원핵생물 다양성을 조사하였다. 세균은 문 수준에서 Proteobacteria (20.8%), Acidobacteria (18.8%), Chloroflexi (16.9%) 및 Firmicutes (10.2%) 등으로 나타났고, 속 수준에서는 Koribacter속 등 144개속이 분석되었다. 고세균은 문 수준에서 Thaumarchaeota (42.8%), Crenarchaeota (36.9%) 및 Euryarchaeota (17.4%)이 나타났으며, 강 수준에서 약 69.4% 비율로 Miscellaneous Crenarchaeota Group (MCG), Finnish Forest Soil Type B (FFSB) 및 Thermoplasmata가 분석되었다. Operational taxonomic units (OTUs)는 세균 3,565 및 고세균 836 OTUs로 나타났고, 세균이 고세균에 비해 풍부하며 우점도가 낮게 나타났다. 또한, 관정 막힘 현상을 유발할 가능성 있는 세균 후보군 135개(1.9%) reads가 분석되었으며, 향후 클로깅 현상에 대한 연구에 자료로 활용할 수 있을 것으로 기대된다. Groundwater heat pump (GWHP) systems must consider phenomena such as clogging to improve system efficiency and maintenance. In this study, we evaluated the prokaryotic diversity in a boring slime sample obtained at a depth of 10 m, which represented an undisturbed sample not affected by aquifer drawdown. Bacteria belonging to the phyla Proteobacteria (20.8%), Acidobacteria (18.8%), Chloroflexi (16.9%), and Firmicutes (10.2%) were found. Additionally, 144 species were identified as belonging to the genus Koribacter. Archaeal phyla were detected including Thaumarchaeota (42.8%), Crenarchaeota (36.9%), and Euryarchaeota (17.4%) and the class level comprised the miscellaneous Crenarchaeota group (MCG), Finnish forest soil type B (FFSB), and Thermoplasmata, which collectively accounted for approximately 69.4% of the detected Archaea. Operational taxonomic units (OTUs) were analyzed to reveal 3,565 bacterial and 836 archaeal OTUs, with abundances of 7.81 and 6.68, and richnesses of 5.96E-4 and 2.86E-3, respectively. The distribution of the groundwater microbial community in the study area showed a higher proportion of non-classified or unidentified groups compared to typical communities in surface water and air. In addition, 135 (approx. 1.9%) reads were assigned to a bacterial candidate associated with clogging.
서로 다른 산을 조절인자로 활용하여 제조한 지르코늄 기반 금속유기골격체의 Diisopropyl Methylphosphonate 흡착 특성
장원형 ( Wonhyeong Jang ),김홍현 ( Honghyun Kim ),정상조 ( Sangjo Jeong ) 한국공업화학회 2021 공업화학 Vol.32 No.5
UiO-66은 높은 흡착능력과 구조적 및 열적 안정성 등으로 여러 현장에 적용 가능한 금속유기골격체(MOF)이다. UiO-66은 제조과정에서 조절인자로 사용되는 산의 종류와 양에 따라 구조적 특성이 변형되고, 화학작용제 흡착 능력을 높일 수 있다고 알려져 있다. 이에 본 연구에서는 다양한 산을 조절인자로 첨가하여 UiO-66을 합성하고, 그 특성을 FT-IR, XRD, 적정장치, 그리고 유사화학작용제 diisopropyl methylphosphonate (DIMP)를 활용한 흡착실험을 통해 분석하였다. 연구 결과 UiO-66의 제조과정에서 염산을 첨가할 시 UiO-66의 Zr-OH 결합과 UiO-66의 유기연결체인 테레프탈산 구조에 일부 손상이 있었다. 특히 이러한 구조 손상은 염산의 농도가 일정 수준 이상으로 높을 때, 그리고 합성시간이 일정 시간 이상으로 길어질 때 발생하였다. 하지만 아세트산과 포름산을 조절인자로 활용하여 제조한 UiO-66은 구조적 손상이 발견되지 않았으며, 염산을 활용하여 제조한 UiO-66에 비하여 결정도, 비표면적, 공극의 부피, 그리고 DIMP 흡착 능력이 모두 높게 나타나 향후 화학작용제 흡착제로서 활용 가능성이 높을 것으로 판단되었다. Depending on the type and amount of acid used as a modulator in the manufacturing process, the structural properties of UiO-66 can be modified and the adsorbability of chemical warfare agents can be enhanced. In this study, several acids as a modulator were used to synthesize UiO-66. Their properties were analyzed with FT-IR, XRD, titrator, and adsorption isotherms using chemical warfare agent simulant, DIMP. The UiO-66, structurally damaged by hydrochloric acid as a modulator, showed lower crystallinity and DIMP adsorption capacity and also smaller specific surface area and volume of voids compared to those of UiO-66, which was manufactured using acetic acid, and formic acid as a modulator. Additionally, UiO-66 which was synthesized by adding formic acid and hydrochloric acid as a modulator, showed the highest DIMP adsorption capacity and is likely to be used as an adsorbent for chemical warfare agent in the future.
다양한 전처리 기술을 적용한 유리 골재의 알칼리-실리카 반응
손연방 ( Sun Lianfang ),김홍현 ( Kim Honghyun ),변정안 ( Byun Jungan ),지광습 ( Zi Goangseup ) 한국구조물진단유지관리공학회 2019 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.23 No.2
The focus of this study is to investigate the ASR of concrete incorporating pre-treated soda-lime glass as aggregates. The glass aggregates were pre-treated with three different techniques, i.e. Ca(OH)2, NaOH and the mixed solution. The results indicate that all the pre-treatment techniques showed a decrease effect on ASR and such an effect increase with treatment time, the mixed solution showed the best effect. The pre-treated glass aggregate at the mixed solution at 80℃ for 7 days providing a 45% reduction in the expansion caused by ASR, and it can be considered innocuous based on ASTM C1260.
효소개질 공중합고분자 합성 및 개질 lipase에 관한 연구
김홍현,강신원,박귀남,박진원 한국공업화학회 2004 응용화학 Vol.8 No.1
Copolymer consists of polyethylene oxide (PEO) and maleic acid anhydride (MA) was used to modify the lipase. By controlling the ratio of ethylene oxide to alkylene oxide (AO), hydrophilic property of copolymer was controlled and the MA functional group of copolymer covalently coupled with the amino groups of lipase. Activity of modified lipase increase more than native one by about 20~30% due to substrate effect of synthesized copolymers. Native lipase was absolutely specific that only reacts limited substrate. However, as the modification was progressed, lipase was changed to group specificity that widely reacts several substrates having similar characteristic.
리파아제 수식 고분자의 활성 촉진 계면활성제로서의 역할
김연수,김홍현,박귀남,박진원 한국공업화학회 2003 응용화학 Vol.7 No.2
Lipase was modified with hydrophilic and hydrophobic copolymers and, was reacted to the several substrates. In general, modified lipase was better than native one as it resolved the substrate. As lipase was modified with strongly hydrophobic copolymers, degree of modification decreased and, relative activity increased.