http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김상빈(Sang-bin Kim),하진욱(Jin-wook Ha) 한국산학기술학회 2019 한국산학기술학회논문지 Vol.20 No.2
본 연구는 커피박을 열풍건조와 유중건조 방법을 통해 고형연료로 제조하여 특성고찰을 진행하였다. 그리고 각 건조시료의 발열량 차이를 비교였다. 그리고 열중량분석기를 이용한 공업분석법이 유기성 폐기물 및 유중처리 시료에 적용 여부를 고찰하였다. 그 결과, 로 내부를 N2 분위기에서 100℃까지 가열한 후 180분 동안 유지한다. 그 후 100℃에서 950℃까지 가열하고 950℃에서 7분 동안 유지한다. 이후 600℃로 냉각하고 로 내부를 O2 분위기로 전환한다. 그리고 815℃에서 30분내 외로 온도를 유지하는 것이 적당하다. 다음으로 건조 전과 후 시료의 표면을 SEM장비로 관찰하였고 EDS 장비를 통해 성분을 측정하였다. 그 결과 중금속과 같은 기타 유해성분은 측정되지 않았다. 그리고 열중량분석기를 통해 TG와 DTG 곡선을 얻었고 이를 통해 열분해와 연소반응의 차이점을 고찰하였다. 그 결과, 유중건조 된 커피박이 열풍건조 된 커피박 보다 착화 시간이 긴 것으로 보인다. 마지막으로, 열중량분석기에서 배출되는 연소가스를 포집하여 시간에 따른 CO와 CO2 농도를 GC를 이용하여 정성 및 정량분석 하였다. In this study, the characteristics of coffee grounds were reviewed by making them from solid fuel through heat-drying and oil-drying method. The differences in the higher calorific power by each dried sample were compared. And industrial analysis using the thermogravimetric analyzer was considered for applicability to organic waste and oily samples. Before and after drying, the surface of the specimen was observed with SEM equipment and the ingredients were measured through the EDS equipment. As a result, no other hazardous substances, such as heavy metals, were measured. Next, The differences between thermal decomposition and combustion reactions were considered through the TG and DTG curves. As a result, it is that the oil-dried coffee grounds is longer to burn than the heat-dried coffee grounds. Finally, the combustion gases emitted through the thermogravimetric analyzer were collected and the carbon monoxide and carbon dioxide performed qualitative and quantitative analysis using GC over time.
광전식 화재감지기의 감지 효율 향상을 위한 광학 구조에 관한 연구
김완호(Wan-Ho Kim),노주현(Ju-Hyun Noh),송상빈(Sang-Bin Song),여인선(In-Seon Yeo) 한국조명·전기설비학회 2021 한국조명·전기설비학회 학술대회논문집 Vol.2021 No.11
There are many difficulties in extinguishing the initial fire due to the detection performance and malfunction of the fire detector. In this paper, the detection efficiency of a photoelectric fire detector were studied according to the chamber structure and characteristics of smoke concentration change.
LED용 실리콘 봉지재의 경화방법이 신뢰성에 미치는 영향
김완호,장민석,강영래,김기현,송상빈,여인선,김재필,Kim, Wan-Ho,Jang, Min-Suk,Kang, Young-Rae,Kim, Ki-Hyun,Song, Sang-Bin,Yeo, In-Seon,Kim, Jae-Pil 한국전기전자재료학회 2012 전기전자재료학회논문지 Vol.25 No.10
Encapsulant curing in terms of convection oven leads to thermal induced stress due to nonuniform thermal conductivity in LED package. We have adopted infrared (IR) light for silicone curing in order to release the stress. The light uniformity irradiated on an encapsulant surface is confirmed to be uniform by optical simulation. Shear strength of die paste using IR compared to convection oven is increased 19.2% at the same curing time, which indicates curing time can be shortened. The indentation depth difference between center and edge of silicone encapsulant in terms of convection oven and IR are 14.8% and 3.4%, respectively. Curing by IR also shows 2.3% better radiant flux persistency rate of LED at $85^{\circ}C$ after 1,000 h reliability test compared to convection curing.