농업기술 - 원예재배시설 유동차광 및 냉각기술

김기덕,Kim, Gi-Deok 전국농업기술자협회 2012 농업기술회보 Vol.49 No.6

비닐이나 유리로 피복되어 있는 원예재배시설은 저온, 강우 등의 불량환경을 극복하여 작물의 생산성을 높이는 데 크게 이바지해 왔다. 그러나 여름철 고온기에 강광의 유입은 직접적 작물 스트레스는 물론 시설 내 온도를 과도하게 상승시켜 작물생육에 악영향을 미친다. 이 때문에 일반적으로 환기와 차광에 의존하여 시설 내 온도상승을 억제하고 있으나 어려움이 많다. 이에 원예재배시설 내 온도 및 광환경을 개선하기 위하여 개발된 유동차광 냉각시스템을 소개하고자 한다.

조선후기(朝鮮後期) 충청도(忠淸道) 지방(地方) 읍치(邑治)의 공간구조(空間構造)에 관한 연구(硏究)

김기덕,이재헌,Kim, Ki-Deok,Lee, Jae-Heon 한국건축역사학회 2003 건축역사연구 Vol.12 No.1

This study is to analyze spatial structure of Eupchi(邑治) on Chungchong province with Chungchong-do regional maps(忠淸道地方地圖) and Eupjis(邑誌, topography) being compiled in the late Chosun dynasty. According to the analysis of it in this study, we make conclusions as follows; 1. Gunhyeon(郡縣) which had been Eupseong(邑城) on Chungchong-do in Chosun dynasty was 13 provinces, and the construction of Eupseong was the coast Eupseong built for the purpose of defense and military Eupseong built at Byeongyeong(兵營) and Geojin(巨鎭). And a measure used In the construction of a castle was Pobaekcheok(布帛尺) used to survey a frontier defence in Chosun dynasty, also Jucheok(周尺) or Yeongjocheok(營造尺) could be assumed to be wide use at that time. 2. Eupchi of Chungchong-do Gunhyeon was almost disposed to the south direction, also had been Jinsan(鎭山) safeguarding it. With relation to Jwahyang(坐向) and Jinsan, its Jinsan and Myeongdang-cheon(明堂川) match each other in location of Eupchi, as it get Jinsan sat, and take main river in front of it. And provincial government office to be the center of a Eupchi is organized into Gaeksa(客舍), Dongheon(東軒), Naea(內衙), Hyangcheong(鄕廳), and practical business facilities, Jakcheong(作廳) or Jangcheong etc., the others is composed for the use of support of those. 3. In most Eupchi in Chungchong province, the layout Sajikdan(社稷壇) and Yeodan(礪壇) was gone with a principle as they were disposed in the west and the north with Eupchi. Seonghwangdan(城隍壇) and Munmyo(文廟) was built in defiance of a principle, as a condition of province. Jangsi(場市) of Eupchi was opened in front of government office or Gaeksa, and the Gunhyeon which had Eupseong was established in the inside and outside of Eupseong.

Calonectria ilicicola 의 병원성과 배양적 특성간의 상호관계

김기덕,( K . D . Kim,J . S . Russin,J . P . Snow,R . A . Valverde ) 한국균학회 1998 韓國菌學會誌 Vol.26 No.3

주파수 성형 LQ제어기를 이용한 반능동식 자기유변유체 현가 시스템

김기덕,전도영,Kim, Gi-Deok,Jeon, Do-Yeong 대한기계학회 2000 大韓機械學會論文集A Vol.24 No.9

An MR(Magneto-Rheological) fluid damper is designed and applied to the semi-active suspension system of a 1/4 car model. The damping constant of the MR damper changes according to input current and the time delay of the damper is included in the system dynamics. The passive method, LQ control and Frequency shaped LQ control are compared in experiments. The advantage of the proposed frequency shaped LQ control is that the ride comfort improves in frequency range from 4 to 8Hz where human body is most sensitive and the driving safety improves around the resonance frequency of unsprung mass, 11Hz. The experiments using a 1/4 car model show the effectiveness of the algorithm.

수평 위치정보 추정을 위한 관성/천측 항법시스템 설계 및 약결합/강결합 방식의 성능 비교

김기덕,Kiduck Kim 한국우주과학회 2023 우주기술과 응용 Vol.3 No.1

본 논문에서는 관성측정장치와 천측 항법을 활용한 수평 위치 추정을 위한 항법 시스템 설계에 대해 기술하였다. 우주 상에서 별은 천구 상에 널리 퍼져 있는 천체로서 별의 관측을 통해 자세 정보를 획득하는데 주로 사용되어 왔다. 하지만 별의 고도 정보를 통해 수평 위치에 대한 정보 또한 획득이 가능한데, 이는 천측 항법이라고 불리며 예전 항해사들이 바다 위 항해 중에 자기의 위치를 알아내던 원리와 동일하다. 특히 GPS 등의 사용이 불가능한 심우주에서는 비교적 관측이 쉬운 별을 통해 위치에 대한 정보를 획득하는 것이 중요하다. 따라서 본 논문에서는 수평 위치정보를 추정할 수 있는 항법 시스템을 소개하며 측정값을 활용하는 방식에 따라 약결합과 강결합의 두 가지 방식의 시스템을 설계하고자 한다. 시뮬레이션을 통해 설계된 시스템이 올바르게 수평 위치정보를 추정하는지 여부와 함께 약결합과 강결합 방식의 성능을 비교하여 추후 천측 항법을 활용한 항법 시스템 설계에 도움이 되고자 한다.

초소형 위성의 랑데부/도킹 기술 검증을 위한 시나리오 설계

김기덕,김해동,조동현,Kim, Kiduck,Kim, Hae-Dong,Cho, Dong-Hyun 한국우주과학회 2022 우주기술과 응용 Vol.2 No.1

This paper illustrates the trajectory design of drift distance recovery after initial launch and proximity operation when verifying rendezvous/docking technology using nanosatellites. The rendezvous/docking is a technology that is the basis of on-orbit servicing technology and is a preemptive process essential for approaching a target object. In particular, since it is difficult to verify in space, nanosatellites have recently been used to reduce the risk and cost of the development stage. Therefore, this paper not only introduces the configuration and specifications of thrusters for nanosatellites but also designs relative trajectories that can take into account the thrust limitations which come from the small size and low power of nanosatellites. In addition, we intend to be helpful in later designing scenarios according to the improvement of available thruster performance through comparison of trajectories and thrust usage with cases without thrust limitations.

조선후기(朝鮮後期) 지방관아건축(地方官衙建築)의 배치구성(配置構成)에 관한 연구(硏究) -문헌사료(文獻史料)에 나타난 충청도(忠淸道)를 대상으로-

김기덕,Kim, Ki-Deok 한국건축역사학회 2004 건축역사연구 Vol.13 No.1

This study is to analyze the building layout of traditional government office building in Chungchong province with Chungchong-do regional maps and Eupjis(邑誌) being compiled in the late Chosun dynasty. The building layout of government office in Chungchong-do is followed in the wake of the spatial structure, Sam-Jo(三朝, three reign) and Oejeon-Naejeon(外殿-內殿), of Chosun dynasty palace. The planning principle of Sam-Jo at government office, Dongheon(東軒) territory for rule administration corresponds to Chijo(治朝) with a local governor who is the ruler, as for the Naea(內衙) territory which a family of him and he lives in, it is corresponded to Yeonjo(燕朝), and in the job space of Ajeon(衙前), it is corresponded to Oejo(外朝). As for the application of the inside and outside principle of provincial government office, Dongheon is corresponded to Oejeon and Naea to Naejeon. A compositive and an approach axis of government office in Chungchong-do is correspond with Dongheon in the center, and these axes form an central axis and an entry space of government office included Oesammun(外三門) Naesammun(內三門) Dongheon or Naea. Because an essential performance of provincial government office is provincial administration, the layout configuration of government office is a function, which is an expression of an official institution.

조선후기(朝鮮後期) 충청도(忠淸道) 전의현(全義縣) 관아건축(官衙建築)의 배치구성(配置構成)에 관한 연구(硏究)

김기덕,이재헌,Kim, Ki-Deok,Lee, Jae-Heon 한국건축역사학회 2001 건축역사연구 Vol.10 No.4

This study is to analyze site layout traditional government office building focused on Chonui-hyon(全義縣) in Chungchong province with Chungchong-do regional maps(忠淸道地方地圖) and Eupjis(邑誌, topography) being compiled in the late Chosun dynasty. The conclusion of analysis can be summarized as follows; 1. Chonui-hyon(全義縣) in Chosun dynasty is gone with a planning principle of the capital city(Han-Seong, 漢城) with disposing Sa-Ji-Dan(社稷壇) and Gaek-Sa(客舍), which are placed to the left and right of Eupchi(邑治), and it is followed in the wake of the spatial structure of Chosun dynasty palace with disposing Dong-Heon(東軒) in front, Nae-A(內衙) at the back of it, or from side to side, also by the Dong-Heon of the center, with organizing each facility around it. 2. Dong-Heon and Gaek-Sa of Chonui-hyon is passed through three step gate, Mun-Ru(門樓), Woi-Sammun(外三門), Nae-Sammun(內三門), from Hong-Salmon(紅門), and are shown hierarchy by haying been placed at the end of approach axis. 3. Dong-Heon can be disposed by Feng-Shui(風水) which have influence on the southeast direction with Jin-San(鎭山) and An-Dae(案對), on the other hand, Gaek-Sa can be disposed by symbolic of the authority of a king. 4. Site layout by function of provincial government office is provided into four ferrite, Dong-Heon, Gaek-Sa, Nae-A, practical business territory, and eve territory is organized by official institution on a social position to radiation, by the compositive axis to be made Woi-Sammun Nae-Sammun Dong-Heon Nae-A 5. Approach process of Chnui-hyon government office is three door system similar to Kam-Young(監營) in a different way two door system in most provincial government office, also approach axis is formed by bending.

하악골 매식 부위 계측을 위한 나선형 단층촬영술의 신뢰도

김기덕,박창서,Kim Kee-Deog,Park Chang-Seo 대한영상치의학회 1997 Imaging Science in Dentistry Vol.27 No.2

The purpose of this study was to evaluate the accuracy and usefulness of spiral tomography through the comparison and analysis of SCANORA cross-sectional tomographs and DentaScan computed tomographic images of dry mandibles taken by a SCANORA spiral tomographic machine and a computed tomographic machine. Thirty-one dry mandibles with full or partial edentulous areas were used. To evaluate the possible effect of location in the edentulous area, it was divided into 4 regions of Me (region of mental foramen), MI (the midportion between Me and M2), M2 (the midportion between mental foramen and mandibular foramen) and S (the midportion of the mandibular symphysis). A ZPC column (sized 4 mm x 5 mm) was seated on the edentulous regions of Me, MI, M2 and S using the acrylic stent. Then SCANORA spiral tomography and computed tomography were taken on the edentulous regions which contained the ZPC column. The ZPC columns and cross-sectional images of the mandible were measured in the radiographs by three observers and the differences between the two imaging modalities were analysed. The results were as follows: 1. In comparing the actual measurements of the ZPC column and measurements in the radiographs, the mean error of the DentaScan computed tomography was 0.07 mm in vertical direction and -0.06 mm in horiwntal direction, while the mean error of the SCANORA spiral tomography was 0.06 mm in vertical direction and -0.12 mm in horizontal direction. There was a significant difference between the two radiographic techniques in the horizontal measurement of the ZPC column of the symphysis region (p<0.05). But there was no significant difference in the measurements of other regions (p>0.05). 2. In measurements of the distance from the alveolar crest to the inferior border of the mandible (H), and of the distance from the alveolar crest to the superior border of the mandibular canal (Y), there was no significant difference between the two radiographic techniques (p>0.05). 3. In measurements of the distance from the lingual border of the mandible to the buccal border of the mandible (W), and of the distance from the lingual border of the mandible to the lingual border of the mandibular canal (X), there was a significant difference between the two radiographic techniques in measurements of the midportion between the mental foramen and the mandibular foramen (M2) (p<0.05). But there were no significant differences in measurements of the other regions of symphysis (S), mental foramen (Me), the first one-fourth portion between the mental foramen and the mandibular foramen (M1) (p>0.05). 4. Considering the mean range of measurements between observers, the measurements of SCANORA spiral tomography showed higher value than those of DentaScan computed tomography, except in measurements of symphysis (S). 5. On the detectability of the mandibular canal, there was no significant difference between the two radiographic techniques (p>0.05). In conclusion, SCANORA spiral tomography demonstrated a higher interobserver variance than that of DentaScan computed tomography for implant site measurements in the posterior edentulous area of the mandible. These differences were mainly the result of difficulty in the detection of the border of the mandible in SCANORA spiral tomography. But considering the cost and the radiation exposure, SCANORA spiral tomography can be said to be a relatively good radiographic technique for implant site measurement.

계분퇴비와 천연무기질 자재를 활용한 고랭지배추 비가림 유기재배 시 시용질소의 이용률과 배추의 생육

김기덕,권영석,유동림,이종남,서종택,Kim, Ki-Deog,Kwon, Yeong-Seok,Yoo, Dong-Lim,Lee, Jong-Nam,Seo, Jong-Taek 한국유기농업학회 2013 韓國有機農業學會誌 Vol.21 No.1

This study was carried out to evaluate nitrogen availability of applied fertilizer and to investigate yield and growth of Korean kimchi cabbage as affected by amount of fertilizer and soil fertility in organic farming applied various fertilizers in rainshelter. The head weight of Korean kimchi cabbage cultured in infertile soil (sand loam) with no amendments was very low. and that in fertile soil (clay loam) was higher than in infertile soil (sand loam). The head weight of Korean kimchi cabbage as affected by amount of fertilizer was more variable in infertile soil (sand loam) than in fertile soil (clay loam). Nitrogen availability of applied fertilizer by Korean kimchi cabbage was lower in fertile soil (clay loam) than in infertile soil (sand loam) and the lower that was, the more fertilizer applied. By application of poultry manure compost 20Mg ha-1 and natural mineral materials such as guano, phosphate rock, and potassium magnesium rock equal to amount of fertilizer recommended in conventional farming, the yield of Korean kimchi cabbage in infertile soil (sand loam) with 1% organic matter came up to 90% of the yield in fertile soil (clay loam) with 6% organic matter. Therefore natural mineral materials such as guano for N source, phosphate rock for P source, and potassium magnesium rock for K source may be able to use as environmental-friendly fertilizers in organic Korean kimchi cabbage production in highland. 비가림하우스에서 고랭지배추 유기재배 시 시용량 및 토양비옥도에 따른 시용질소의 이용률과 배추의 수량성을 검토하였다. 무비구에서의 구중은 사양토 토양에서 현저히 낮았으며, 비옥도가 낮은 사양토에 비해 비옥도가 높은 식양토에서 높았다. 시비량에 따른 구중의 변화는 비옥도가 높은 식양토에 비해 비옥도가 낮은 사양토에서 더 크게 나타났다. 질소이용률은 토양의 비옥도가 높고, 질소시비량이 많을수록 낮았다. 질소함량 1%의 사양토에서도 계분퇴비 2톤/10a과 표준시비량 수준의 천연무기질자재의 시용으로 질소함량 6%의 식양토의 약 90% 수준의 수량을 나타냈다. 질소, 인산, 및 칼리질 천연광물자원인 구아노, 인광석 및 황산가리고토 등은 친환경 자재로서 균형적 시비를 꾀하는 유기재배에서 널리 활용될 수 있을 것으로 보인다.