http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Coloring agent가 지르코니아 색조 재현성에 미치는 영향
김광현,노관태,배아란,우이형,김형섭,Kim, Kwanghyun,Noh, Kwantae,Pae, Ahran,Woo, Yi-Hyung,Kim, Hyeong-Seob 대한치과보철학회 2017 대한치과보철학회지 Vol.55 No.1
목적: 이 연구의 목적은 coloring agent의 종류와 적용 횟수가 지르코니아의 색조에 미치는 영향을 알아보는 것이다. 재료 및 방법: 단일구조 지르코니아($15.7mm{\times}15.7mm{\times}2.0mm$)를 준비하여 완성된 시편은 11개 실험군 그룹으로 coloring agent의 종류와 적용 횟수에 따라 a1-a5와 w1-w5로 나누었다. 색조의 측정은 분광측색기를 이용하여 이루어졌다. Coloring agent를 적용시키지 않은 그룹을 대조군으로 설정하였다. 각 그룹의 색차의 정도(${{\Delta}E^*}_{ab}$)와 translucency parameter (TP)를 분석하였다. 측정치는 two-way ANOVA, multiple comparison $Sch{\acute{e}}ffe$ test, Pearson correlation와 linear regression analysis를 이용하여 분석하였다. 결과: Coloring agent의 적용횟수가 증가할수록 두가지 종류 모두에서 지르코니아의 명도는 감소하고 황색계열은 증가했다. Coloring agent는 지르코니아의 투명도에는 영향을 미치지 않았다. 각 그룹 간의 색조차이는 ${0.87{\Delta}E^*}_{ab}$에서 ${9.43{\Delta}E^*}_{ab}$였다. 결론: Coloring agent의 종류와 적용 횟수는 지르코니아의 색조 차이에 영향을 미치지 않았다. Purpose: The aim of this study was to evaluate the effect of two types of coloring agents and the number of application on the color of zirconia. Materials and methods: Monolithic zirconia specimens ($15.7mm{\times}15.7mm{\times}2.0mm$) (n = 33) was prepared and divided into 11 groups. Each experimental group was coded as a1-a5, w1-w5 according to the type of coloring agent and number of application. Specimens with no coloring agent applied were set as control group. The color difference of specimen was measured by using double-beam spectrophotometer, and calculated color difference (${{\Delta}E^*}_{ab}$), translucency parameter (TP). All data was analyzed with two-way ANOVA, multiple comparison $Sch{\acute{e}}ffe$ test, Pearson correlation and linear regression analysis. Results: As the number of application increased, values of $CIE\;L^*$ was decreased, but values of $CIE\;b^*$ was increased in both coloring agents. However, there was no significant difference on values of translucency parameter. The color difference range of each group was ${0.87{\Delta}E^*}_{ab}$ to ${9.43{\Delta}E^*}_{ab}$. Conclusion: In this study, type of coloring agent and the number of application did not affect the color difference of zirconia.
김광현,Kim, Gwang-Hyeon 한국과학기술단체총연합회 1995 과학과 기술 Vol.28 No.10
건축은 첨단기술로 분류하지도 않는다. 삼풍백화점의 참사를 보고도 문제점의 맥을 짚지 못하고 있는 현실이 안타깝다. 세계화를 위한첨단 건축 기술을 남의 것 아닌 우리 것으로 차분히 개척해 나가야 하겠다.
김광현,Kim, Gwang-Hyun 한국전자통신학회 2014 한국전자통신학회 논문지 Vol.9 No.9
웹 사이트를 통한 정보제공이 활성화 되면서 웹 애플리케이션의 취약점을 이용한 웹 해킹 시도가 증가하고 있다. 웹 애플리케이션의 보안을 강화하려면 먼저 웹 애플리케이션의 취약점을 찾아 제거할 필요가 있다. 본 논문은 웹 애플리케이션에 대한 기존의 취약점 해결 방법을 분석하고 보다 발전된 취약점 해결방안을 제시하고자 한다. 웹 애플리케이션 취약점 분석을 통해 현존하는 웹 취약점을 제거한 웹 보안 상태의 안정성을 점검하고 기존 방법의 적합성을 평가하였다. 또한 기존 취약점 해결방안의 미비점을 보완한 방법으로 웹 프락시(Proxy) 시스템을 통한 취약점 분석 툴을 구현하고 최적화 방안을 제시하였다. Because of the proliferation of web services through web site, web hacking attempts are increasing using vulnerabilities of the web application. In order to improve the security of web applications, we have to find vulnerabilities in web applications and then have to remove. This paper addresses a vulnerability in a web application on existing problems and analyze and propose solutions to the vulnerability. This paper have checked the stability of existing web security solutions and evaluated its suitability through analysis of vulnerability. Also, we have implemented the vulnerability analysis tools for web Proxy system and proposed methods to optimize for resolution of web vulnerabilities.
Powder Blasting 에 의한 유리의 미세 홈 가공시 노즐 주사횟수의 영향
김광현,최종순,박동삼,Kim, Kwang-Hyun,Choi, Jong-Sun,Park, Dong-Sam 대한기계학회 2002 大韓機械學會論文集A Vol.26 No.7
The old technique of sandblasting which has been used for decoration of glass surface has recently been developed into a powder blasting technique for brittle materials such as glass, silicon and ceramics, capable of producing micro structures larger than $100{\mu}$ m. This paper describes the performance of powder blasting technique in micro-line grooving of glass and the effect of the number of nozzle scanning on the depth and width of line groove. Experimental results showed that increasing the no. of nozzle scanning resulted in the increase of depth and width in grooves. Increase of width which may cause several problems in the precision machining results from wear of mask film. Therefore, well-controlled masking process is the most important factor for micro machining of glass with accuracy.