http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
강훈종,김대희,윤국진,조숙희,안충현,Kang, H.J.,Kim, D.H.,Yun, K.J.,Cho, S.H.,Ahn, C.H. 한국전자통신연구원 2004 전자통신동향분석 Vol.19 No.4
3차원 비디오는 차세대 정보 통신 서비스 분야의 핵심 기술로서 사용자에게 보다 고차원의 서비스를 제공하는 것으로 미래 시장을 선점하기 위한 기술개발 노력이 각국에서 이루어지고 있다. 이러한 각국의 노력을 반영하여 MPEG은 3차원 비디오에 대한 서비스 모델 창출 및 표준화를 진행하고 있다. 본 고에서는 획득, 처리, 디스플레이 방식에 따라 분류되 어진 3차원 비디오를 소개하고, 이를 이용한 각각의 서비스 모델을 제시한다. 또한, 국내외의 3차원 비디오에 대한 기술개발 동향 및 향후 개발 방향에 대하여 설명한다.
강훈철 ( H. C. Kang ),이승호 ( S. H. Lee ),김남수 ( N. S. Kim ),이경종 ( K. J. Lee ) 한국열처리공학회 2003 熱處理工學會誌 Vol.16 No.1
N/A In Nb, V and Ti added steels, carbo-nitrides are formed due to their strong interaction with C and N. The formation of carbo-nitrides has an important role to control the microstructure as well as mechanical properties by grain size refinement and precipitation hardening. However, the quantitative analysis of distribution of precipitates and the effect of precipitates on the phase transformation and mechanical properties are still far from satisfactory. In this study, the quantitative analysis of precipitates in austenite was investigated using the fact that the formation of precipitates in Nb, V and Ti added steels accelerates austenite/ferrite transformation. The formation of precipitates was controlled by adjusting holding temperature and time in austenite region. transformed Volume fractions were measured by dilatometer during slow cooling. Iso-precipitation kinetics were determined by comparing 5% and 50% volumes transformed at various conditions respectively. The result was compared with the calculated.
상이 (相異) 한 선량의 자외선을 조사한 브로일러 병아리에 있어서 간장 비타민 D 농도의 경시적 변화
장윤환(Y . H . Chiang),강훈석(H . S . Kang),여영수(Y . S . Yeoh),김강수(K . S . Kim),조인호(I . H . Cho),배은경(E . K . Bae) 한국축산학회 1992 한국축산학회지 Vol.34 No.5
This study was carried out to elucidate the time course variation of liver vitamin D(VD) concentration of broiler Hubbard chicks fed VD-deficient diet for 31 days in a subdued light room and exposed to UVB light(maximum intensity at 297 nm) with dose of 0.204 or 0.408 mJ/㎠. The lipid in liver was extracted by chloroform-methanol (2:1) and VD fraction was separated by Sep-Pak silica cartridge. The VD contents were analyzed by normal phase HPLC. The control birds received no UVB irradiation showed the liver VD level of 5 ng/g. When 0.204 mJ/㎠ was treated to whole body of chicks, the liver VD level tended to increase until 90 hrs after irradiation, where the maximum value of 11 ng/g appeared. A decreased level of ng/g was present at 138 hrs after exposure. The peak value (16 ng/g) was shown also at 90 hrs after UVB treatment when 0.408 mJ/㎠ was applied. A low level of 5 ng/g was present at 138 hrs after irradiation. Consequently it was verified that 0.408 mJ/㎠ of UVB treatment produced more VD in liver of broiler chicks than the 0.204 mJ/㎠ did, and the highest level of liver VD appeared at 90 hrs after exposure.
브로일러 병아리의 등 피부에 312 mm 자외선 조사시 상이한 선량이 혈장내 비타민 D3 함량에 미치는 영향
장윤환(Y . H . Chiang),원지웅(J . W . Won),강훈석(H . S . Kang),김강수(K . S . Kim),여영수(Y . S . Yeoh) 한국축산학회 1992 한국축산학회지 Vol.34 No.3
This study was conducted to elucidate the effect of different dose of 312 nm UV light on plasma vitamin D₃(D₃) content of 3 week old broiler chicks. The 0.32, 0.65 or 0.98 J/㎠ of dose was applied on dosal skin of birds and blood samples were collected day 0, 1, 2, 3, 4 and 5 after UV exposure. The plasma was isolated and D₃ concentrations were analyzed by HPLC. When dorsal skin was exposed to 0.32 J/㎠ of UV dose, the mean plasma D₃ content was 24 ng/㎖ immediately after irradiation and 46 ng/㎖ (peak) at day one after exposure. The D₃ level tended to decrease until day 5 (10 ng/㎖). As 0.65 J/㎠ of UV dose was treated, the D₃ concentrations were 20, 22, 37, 14, 29 and 10 ng/㎖ at day 0, 1, 2, 3, 4 and 5 after irradiation, respectively. When 0.98 J/㎠ dose was applied, the plasma D₃ levels were 25, 25 and 34 ng/㎖ at day 0, 1 and 2, respectively and decreased thereafter. Consequently it was shown that the treatment of 0.32 J/㎠ produced more D₃ in chick plasma than 0.65 or 0.98 J/㎠ did (P$lt;.05).
FEMU 를 활용한 비선형 응력-변형률 메타 모델 인자 추정 방안
홍승표(S. P. Hong),강훈효(H. H. Kang),박대호(D. H. Park) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
현대 산업에서 금속 소재의 가공을 위해 소성 공정을 진행하며, 이로 인해 경화 현상과 같은 비선형 거동이 발생한다. 금속 소재의 비선형 거동을 정의하는 것은 어렵기 때문에 특정 소재의 비선형 물성을 예측 및 추정하기 위해 다양한 물성 메타모델들이 제안되고 있다. 기존의 물성 메타 모델은 주로 외삽을 이용하여 S-S Curve 에 기반한 재료의 물성을 예측하는 연구에 사용되었다. 그러나 외삽은 예측 구간의 비선형성에 대한 정확성을 보장하지 못하기 때문에 높은 비선형성을 정확히 나타내기 어려운 문제가 있다. 본 논문에서는 응력-변형률 물성에 대한 기존의 물성 메타 모델과 별도의 메타 모델을 활용하여 소재의 비선형 물성 추정 성능을 비교했다. 소재에 대한 인장 시험은 ASTM E8/E8M 을 기반으로, 물성 메타 모델의 인자 초기화는 ASTM E646 을 기반으로 수행했다. 물성 메타 모델을 유한요소해석에 적용하여, 시험 결과와 해석 결과를 RMSE 로 비교했다. FE Simulation 으로 발생한 오차는 FEMU(Finite Element Model Updating) 기법을 사용하여 메타 모델 기반 인자의 초기화를 반복함으로써, 최적화를 통해 감소시켰다. 이러한 과정을 통해, 물성 메타 모델을 정의하는 과정에서 멱법칙과 지수법칙만이 아닌, 재료 물성의 높은 비선형성을 잘 나타내는 별도의 메타 모델에 대한 고려가 필요함을 제시하였다.