An adaptive delay compensation method based on a discrete system model for real-time hybrid simulation

Zhen Wang,Guoshan Xu,Qiang Li,Bin Wu 국제구조공학회 2020 Smart Structures and Systems, An International Jou Vol.25 No.5

The identification of delays and delay compensation are critical problems in real-time hybrid simulations (RTHS). Conventional delay compensation methods are mostly based on the assumption of a constant delay. However, the system delay may vary during tests owing to the nonlinearity of the loading system and/or the behavioral variations of the specimen. To address this issue, this study presents an adaptive delay compensation method based on a discrete model of the loading system. In particular, the parameters of this discrete model are identified and updated online with the least-squares method to represent a servo hydraulic loading system. Furthermore, based on this model, the system delays are compensated for by generating system commands using the desired displacements, achieved displacements, and previous displacement commands. This method is more general than the existing compensation methods because it can predict commands based on multiple displacement categories. Moreover, this method is straightforward and suitable for implementation on digital signal processing boards because it relies solely on the displacements rather than on velocity and/or acceleration data. The virtual and real RTHS results show that the studied method exhibits satisfactory estimation smoothness and compensation accuracy. Furthermore, considering the measurement noise, the low-order parameter models of this method are more favorable than that the high-order parameter models.

Molecular characterization of chemosensory protein genes in Bactrocera minax (Diptera: Tephritidae)

Wang Zhao‐Xiang,Qi Zhen‐hua,Chen Jian,Wang Fu‐Lian,Gui Lian‐You,Zhang Guo‐Hui 한국곤충학회 2021 Entomological Research Vol.51 No.7

Chemoreception is of great importance for survival of insects. Chemosensory proteins (CSPs) are believed to be involved in the perireceptor events of chemosensory system in many insect species, but this has not been clarified in the citrus fruit fly, Bactrocera minax, a serious dipteran pest of citrus crops. Previous studies indicated that four CSP genes were identified in many fly speices in Diptera. In the present study, we also identified four CSP genes in B. minax,namely BminCSP1–4, from a transcriptome database. All CSP proteins encoded by these genes bear the typical hallmarks of the CSP family: an N-terminal signal peptide and the four highly conserved cysteine residues. Phylogenetic analysis comparing with other dipteran CSPs indicated that dipteran CSPs may evolved from three ancestral CSP genes, and revealed the sequence diversities of BminCSPs and showed that BminCSP1–4 are clustered in separate groups, indicating the possibility of their contrasting function in B. minax. Furthermore, the tissue distribution of the four CSP genes in adult B. minax was analyzed by real-time quantitiative PCR. The results demonstrated that BminCSP3 are significantly transcriptionally enriched in antennae; BminCSP4 expressed primarily in heads; BminCSP1 and BminCSP2 showed high expressions in different tissues, such as antennae, abdomens and wings. Based on these findings, the different implications for the functions of BminCSPs are discussed. This study will offer a significant indication for further functional studies of the CSPs in B. minax

Design and Experiment of an Automatic Temperature Control Device of Composite Shape-Stabilized Phase Change Material for Concrete Box Bridges

Zhen Wang,Jianting Zhou,Leng Liao,Jinquan Zhang,Huabin Zhang 대한토목학회 2022 KSCE JOURNAL OF CIVIL ENGINEERING Vol.26 No.2

To solve the problem of bridge surface cracking caused by an uneven temperature field inside and outside the web of a concrete box structure, an automatic temperature control device applied to the beam surface of a concrete box bridge in the daytime is developed. The device, hanging on the surface of the box girder webs, consists of a radiation cooling coating and a composite shape-stabilized phase change material. With reference to a bridge in Guizhou Province, finite element analysis, short-term temperature monitoring and temperature-drop monitoring are carried out using the device. The result shows that the automatic temperature control device works well continuously. For a box girder without an automatic temperature control device, the inside and outside of the web demonstrate different sensitivities to the temperature of the external environment, with a high temperature fluctuation and a relatively high temperature stress. For a box girder with an automatic temperature control device, as the cooling coating reflects part of the solar radiation and the phase transformation of the composite shape-stabilized phase change material releases or absorbs part of the latent heat to or from the external environment, the temperature fluctuation and temperature stress of the inside and outside of the web are relatively small. When the temperature suddenly drops, the automatic temperature control device works better than under conventional weather conditions because it can reduce the external temperature by approximately 50% on the outer surface of the box girder webs.

Preparation and characterization of flaky FeSiAl composite magnetic powder core coated with MnZn ferrite

Zhen Wang,Xiansong Liu,Xucai Kan,Ruiwei Zhu,Wei Yang,Qiuyue Wu,Shengqiang Zhou 한국물리학회 2019 Current Applied Physics Vol.19 No.8

The flattening of FeSiAl soft magnetic powder was achieved by ball milling process, and MnZn/FeSiAl composite magnetic powder core was prepared by press molding. The effect of different coating amount of MnZn ferrite on the soft magnetic properties of FeSiAl was studied. At the same time, the optimal stress-relieving annealing temperature of the composite magnetic powder core is revealed. The results showed that the addition of MnZn ferrite affected the magnetic properties such as saturation magnetization (Ms), initial permeability (μi) and power loss (Pcm) of FeSiAl soft magnetic. With the increase of MnZn ferrite addition content, the saturation magnetization of composites decreased gradually, and the magnetic permeability increased first and then decreased, and the loss decreased first and then increased. When the addition content of MnZn ferrite was 5%, the permeability reached the maximum, which was 28.1% higher than that of the pure FeSiAl magnetic powder core under the same conditions. At the same time, the loss was the lowest, which was 13.3% lower than the pure FeSiAl powder core under the same conditions. When the annealing temperature is around 650 °C, the magnetic powder core has the largest magnetic permeability and the lowest loss.

Activation of Neuronal Nitric Oxide Synthase by M2 Muscarinic Receptors Associated with a Small Increase in Intracellular Calcium

Wang, Shou-Zhen,Lee, Seok-Yong,Zhu, Sheng-Zu,Wotta, Diane R.,Parsons, Ann M.,El-Fakahany, Esam E. 성균관대학교 약학연구소 1998 成均藥硏論文集 Vol.10 No.1

We investigated the coupling of the M2 muscarinic acetylcholine receptors expressed in Chinese hamster ovary cells to activation of neuronal nitric oxide(NO) synthase. Stimulation of guanylate cyclase activity in detector neuroblastoma cells was used as an indirect measure of the generation of NO in Chinese hamster ovary cells. The muscarinic agonist carbachol induced marked time-and concentration-dependent enhancement of the activity of NO synthase. Activation of neuronal NO synthase by M2 muscarinic receptors was associated with a small increase in the concentration of intracellular Ca^2+. These data suggest the presence of alternate mechanisms of activation of neuronal NO synthase which might be operative in the absence of large changes in the concentration of cellular Ca^2+. These findings help to understand the mechanisms of activation of NO synthase.

Human Papillomavirus Vaccine Awareness, Acceptability, and Decision-Making Factors among Chinese College Students

Wang, Shao-Ming,Zhang, Shao-Kai,Pan, Xiong-Fei,Ren, Ze-Fang,Yang, Chun-Xia,Wang, Zeng-Zhen,Gao, Xiao-Hong,Li, Man,Zheng, Quan-Qing,Ma, Wei,Zhao, Fang-Hui,Qiao, You-Lin,Sivasubramaniam, Priya Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.7

Background: College students are recommended as the target groups for catch-up human papillomavirus (HPV) vaccination. Systematical exploration of awareness, acceptability, and decision-making factors of HPV vaccination among Chinese college students has been limited. Materials and Methods: A multi-center survey was conducted in mainland China between November 2011 and May 2012. College students aged 18-22 years were stratified by their grade, gender, and major for sampling. Socio-demographic and HPV-related information such as knowledge, perceptions, acceptability, and attitudes were collected through a questionnaire. Results: A total of 3,497 undergraduates completed the questionnaire, among which 1,686 were males. The acceptability of the HPV vaccine was high (70.8%). Undergraduates from high-level universities, at lower grade, or with greater prior knowledge of HPV vaccines showed higher acceptability of HPV vaccination ($p_{trend}$ <0.001). Additionally, undergraduates with vaccination experience outside the National Expanded Program on Immunization (OR=1.29; 95%CI: 1.10-1.51) or fear of HPV-related diseases (OR=2.79; 95%CI: 2.28-3.41) were more willing to accept HPV vaccination. General knowledge of HPV vaccine was low among undergraduates, and safety was a major concern (71.05%). The majority of students wished to pay less than 300RMB for HPV vaccine and chose the Chinese Center for Disease Control and Prevention as the most appropriate venue for vaccination. Conclusions: Although most undergraduates demonstrate positive attitudes towards HPV vaccination, challenges pertaining to introduction exist in China. Corresponding proactive education and governmental subsidy to do so are urgently needed by this age-group population. Suggestions and potential strategies indicated may help shape the future HPV vaccination program in China.

A Study of Advanced Controllable Self-organizing Neural Networks with the Aid of Random Forest

Wang Zhen(왕진),Eun-Hu kim(김은후),Sung-Kwun Oh(오성권) 대한전기학회 2021 대한전기학회 학술대회 논문집 Vol.2021 No.7

Hybrid Nanostructure Formation on Hollow Glass Microparticles as Thermally Insulating Composite Elements

Wang, Zhen,Zhang, Tao,Park, Byung Kyu,Il Lee, Woo,Hwang, DavidJ. American Scientific Publishers 2017 Nanoscience and Nanotechnology Letters Vol.9 No.4

Adsorption of Lead(II) from Aqueous Solution by Two Modified Porous Chelating Resins Based on (3-Mercaptopropyl) Trimethoxysilane

Zhen-Zheng Wang,Hong-Dong Duan,Xia Meng,Yi-Fan Zhang,Hui-Min Qi 한국고분자학회 2016 Macromolecular Research Vol.24 No.9

Two novel types of thiol-based chelating resins were fabricated by modifying poly(2-hydroxyethyl methacrylate- co-glycerol dimethacrylate) (P(HEMA-GDMA)) and poly(2-hydroxyethyl methacrylate-co-ethylene glycol dimethacrylate) (P(HEMA-EGDMA)) with (3-mercaptopropyl) trimethoxysilane(MPS), and used to adsorb lead(II) from aqueous solution. The effects of initial lead(II) concentrations, solution pH, coexisting ions on adsorption of lead(II) were investigated. After modifying, the product P(HEMA-GDMA)-SH has excellent adsorption capacity (118.56 mg/g) for lead(II) at initial lead(II) concentration of 200 mg/L. The resins could easily be regenerated and were reused 6 times without significant loss of adsorption capacity. Besides, the presence of coexisting ions did not markedly influence the adsorption capacities of the resins. The results indicate that the functional thiol-based resins are efficient adsorbents for the removal of toxic lead(II) ions in water treatment.

Formation of Al₂O₃ Barrier in Magnetic Junctions on Different Substrates by O₂ Plasma Etching

Zhen-Jun Wang,Won-Cheol Jeong,Yeo-Geon Yoon,Chang-Wook Jeong,Seung-Ki Joo 한국자기학회 2001 Journal of Magnetics Vol.6 No.3

Co/Al₂O₃/NiFe and Co/Al₂O₃/Co tunnel junctions were fabricated by a radio frequency magnetron sputtering at room temperature with hard mask on glass and 4° tilt cut Si (111) substrates. The barrier layer was formed through two steps. After the Al layer was deposited, it was oxidized in the chamber of a reactive ion etching system (RIE) with O₂ plasma at various conditions. The dependence of the TMR value and junction resistance on the thickness of Al layer (before oxidation) and oxidation parameters were investigated. Magnetoresistance value of 7% at room temperature was obtained by optimizing the Al layer thickness and oxidation conditions. Circular shape junctions on 4° tilt cut Si (111) substrate showed 4% magnetoresistance. Photovoltaic energy conversion effect was observed with the cross-strip geometry junctions on Si substrate.