http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
A rechargeable Aqueous Zn-CO₂ Battery for Energy Storage and Highly Efficient CO₂ Fization
Yejin Yang(양예진),Arim Seong(성아림),Sewon Pyo(표세원),Hyojea Hwang(황효제),Sangwook Joo(주상욱),Jinkyung Oh(오진경),Hyoi Jo(조효이),Donghwi Jeong(정동휘),Hyunmin Kim(김현민),Minseo Kim(김민서),Nayeon Ko(고나연),Sihyuk Choi(최시혁),Gun 한국에너지기후변화학회 2020 한국에너지기후변화학회 학술대회 Vol.2020 No.11
탄소 중립-제로를 향한 H₂ 및 유용한 화학 물질 생산을 통한 고효율 금속-CO₂ 시스템
김건태(Guntae Kim),양예진(Yejin Yang),김정원(Jeongwon Kim),표세원(Sewon Pyo) 대한기계학회 2021 대한기계학회 춘추학술대회 Vol.2021 No.4
대기 중 이산화탄소 (CO2)는 산업 기간 동안 278에서 415ppm으로 증가했으며 기후 변화에 중대한 영향을 미쳤습니다. 이러한 위기에 대응하여 탄소 포집, 활용 및 저장/격리 (CCUS) 기술이 연구되었습니다. 그러나 지금까지 기존 전환 기술의 경제성은 부진한 CO2 전환으로 인해 여전히 불충분합니다. 여기에서 우리는 전기 에너지와 수소 (H2)를 생성하기 위해 수용액에서 CO2의 자발적인 용해로 인한 산성도를 활용하는 수계 아연-, 알루미늄-및 마그네슘-CO2 시스템을 보고합니다. 이 시스템은 알칼리 및 중성 조건 하에서 전형적인 HER 와 비교하여 0.4V 만큼 양의 변화된 수소 발생 반응 (HER) 개시 전위를 가지며 34mV dec-의 낮은 Tafel 기울기로 HER 반응을 용이하게 합니다. Al-CO2 시스템의 최대 전력 밀도는 125mW cm<sup>-2</sup> 로 CO2 활용 전기 화학 시스템 중 가장 높은 값입니다. 이론적으로는 10kW 규모의 금속 -CO2 시스템에서 10,000L (약 1kg H2)의 수소 (H2) 가스를 생산할 수 있고 각각 시간당 30kg의 CO2를 제거할 수 있습니다. Atmospheric carbon dioxide (CO2) has increased from 278 to 415 parts per million (ppm) over the industrial period and has critically impacted climate change. In response to this crisis, carbon capture, utilization, and storage/sequestration (CCUS) technologies have been studied. So far, however, the economic feasibility of the existing conversion technologies is still inadequate owing to sluggish CO2 conversion. Herein, we report an aqueous zinc–, aluminum–, and Mg-CO2 system that utilizes acidity from spontaneous dissolution of CO2 in aqueous solution to generate electrical energy and hydrogen (H2). The system has a positively shifted onset potential of hydrogen evolution reaction (HER) by 0.4 V compared to a typical HER under alkaline conditions and facile HER kinetics with low Tafel slope of 34 mV dec-1. The Al–CO2 system has a maximum power density of 125 mW cm<sup>-2</sup> which is the highest value among CO2 utilization electrochemical system. Theoretically, in 10 kW-scale metal-CO2 system, the 10,000 L (about 1 kg H2) of hydrogen (H2) gas could be produced and 30 kg of CO2 could be removed per hour, respectively.
강수민 ( Kang Sumin ),나보현 ( Ra Bohyun ),양예진 ( Yang Yejin ),한승우 ( Han Seungwoo ) 한국건축시공학회 2022 한국건축시공학회 학술발표대회 논문집 Vol.22 No.2
Recently, the criteria for assessing industrial accidents have been replaced by the mortality rate. It was found that the number of deaths from excavation work was the highest among construction machinery. The risk assessment is being conducted, however the industrial accident mortality rate has not decreased. Accordingly, this study aims to provide the basic for the create of a risk assessment model specialized in construction work at excavator. It provides absolute value from the risk model which is capable of delivery the probability of a disaster. In addition, we provide a relative risk model that compares the risk through scores between detailed works. The relative risk model is combined by likelihood and severity; the likelihood indicates the frequency of accidents and the severity indicates seriousness of fatal accidents. A variable that reflects the conditions of the construction site was added to the risk assessment model based on past disaster cases. And using the concepts of probability and average, the risk assessment process was quantified and used as an objective indicator. Therefore, the model is expected to reduce disasters by raising the awareness of disasters.