A novel semi-IPN hydrogel: Preparation, swelling properties and adsorption studies of Co (II)

Xiaohong Wang,Haiqian Hou,Yujun Li,Yingying Wang,Chen Hao,Cunwang Ge b 한국공업화학회 2016 Journal of Industrial and Engineering Chemistry Vol.41 No.-

A range of super-absorbent semi-IPN hydrogels—polyvinyl alcohol/poly (acrylic acid-co-acrylic amide)(PVA-P(AA-co-AM)) were synthesized via free radical polymerization method under ultrasound-assistedcondition. L16 (45) orthogonal experiments were designed to optimize the synthesis conditions and thesuccess was characterized by FTIR, SEM and TGA. Swelling capacities were studied in various pH solutionand saline solution whose results indicated that pH in solution shows an obvious influence on it and thesalt resistance is greater in salt solution of low valence relative to that of high valence. Meanwhile, itsswelling behavior was evaluated in water solution, which revealed that the swelling process conformedto the Schott model and the diffusion type was non-Fickian diffusion. Moreover, the adsorption on cobalt(II) from aqueous solutions was also investigated in the paper. The optimumpH value was found close to4 for the cobalt (II) adsorption and it was discovered that adsorption kinetics and adsorption isothermsfor cobalt (II) were in accordance with the pseudo-second-order model and the Freundlich modelrespectively. Besides, thermodynamic parameters were calculated for the cobalt (II) adsorption and thefindings revealed that the adsorption behavior is spontaneous and endothermic.

Bar-Coated Ultrathin Semiconductors from Polymer Blend for One-Step Organic Field-Effect Transistors

Ge, Feng,Liu, Zhen,Lee, Seon Baek,Wang, Xiaohong,Zhang, Guobing,Lu, Hongbo,Cho, Kilwon,Qiu, Longzhen American Chemical Society 2018 ACS APPLIED MATERIALS & INTERFACES Vol.10 No.25

<P>One-step deposition of bi-functional semiconductor-dielectric layers for organic field-effect transistors (OFETs) is an effective way to simplify the device fabrication. However, the proposed method has rarely been reported in large-area flexible organic electronics. Herein, we demonstrate wafer-scale OFETs by bar coating the semiconducting and insulating polymer blend solution in one-step. The semiconducting polymer poly(3-hexylthiophene) (P3HT) segregates on top of the blend film, whereas dielectric polymethyl methacrylate (PMMA) acts as the bottom layer, which is achieved by a vertical phase separation structure. The morphology of blend film can be controlled by varying the concentration of P3HT and PMMA solutions. The wafer-scale one-step OFETs, with a continuous ultrathin P3HT film of 2.7 nm, exhibit high electrical reproducibility and uniformity. The one-step OFETs extend to substrate-free arrays that can be attached everywhere on varying substrates. In addition, because of the well-ordered molecular arrangement, the moderate charge transport pathway is formed, which resulted in stable OFETs under various organic solvent vapors and lights of different wavelengths. The results demonstrate that the one-step OFETs have promising potential in the field of large-area organic wearable electronics.</P> [FIG OMISSION]</BR>

Microbial Assimilation of Atmospheric Co₂ In Soil: An Important Process in Terrestrial C Cycling

Tida Ge,Jinshui Wu,Xiaohong Wu 한국토양비료학회 2014 한국토양비료학회 학술발표회 초록집 Vol.2014 No.6

A review of experimental methods for characterising composite viscosities of continuous fibre-reinforced polymer composites

Wang Jinhuo,Han Yang,Ge Xiaohong,Qi Zhengbing,Zhao Jun,Wang Rongwen,Wu Huawei,Han Taiping,Sun Shaoxun,Wang Hui,Lin Jia,Liu Yuejun,Kong Xiangsong,Chen Qiming,Zeng Xiangxu 한국유변학회 2023 Korea-Australia rheology journal Vol.35 No.2

Optimisation design of composite structures requires an accurate predictive model for forming behaviour. The simulation process contains a number of model parameters which include transverse and longitudinal viscosities of continuous fibrereinforced viscous composites, fundamental to predicting the shear rheology. Shearing the unidirectional composite along the fibre direction gives a measure of the longitudinal viscosity (LV), whilst shearing across or transverse to the fibre direction gives a measure of the transverse viscosity (TV). Numerous experimental work was conducted in the past to measure these two viscosities for various materials. However, conflicting measurements by different test methods were obtained and these apparent discrepancies had not yet been systematically investigated in any single study. This paper reviews previous work on characterisation techniques to further understand the cause of such discrepancy, and hence to improve measurement accuracy, which would benefit future work on theoretical modelling of the composite viscosities and optimisation simulation of composites forming. Some important findings, such as effects of resin-rich areas, contributory factors of elastic effects, non-Newtonian behaviour for composites with Newtonian matrix, aspect ratio and end effects of test samples, geometry effects of fibres and fibre rearrangement during shearing, existence of a mathematical relationship between LV and TV and necessary benchmarking exercise using Newtonian matrix composites, were summarised.

Long non-coding RNAs in Sus scrofa ileum under starvation stress

Wang Shu,Ma Yi Jia,Li Yong Shi,Ge Xu Sheng,Lu Chang,Cai Chunbo,Yang Yang,Zhao Yan,Liang Guo Ming,Guo Xiaohong,Cao Guoqing,Li Bugao,Gao Pengfei 아세아·태평양축산학회 2022 Animal Bioscience Vol.35 No.7

Objective: In this study, we aimed to identify long non-coding RNAs (lncRNAs) that play important roles in starvation stress, analyze their functions, and discover potential molecular targets to alleviate starvation stress to provide a theoretical reference for subsequent in-depth research. Methods: We generated a piglet starvation stress animal model. Nine Yorkshire weaned piglets were randomly divided into a long-term starvation stress group (starved for 72 h), short-term starvation stress group (starved for 48 h), and the control group. LncRNA libraries were constructed using high-throughput sequencing of piglet ileums. Results: We obtained 11,792 lncRNAs, among which, 2,500 lncRNAs were novel. In total, 509 differentially expressed (DE)lncRNAs were identified in this study. Target genes of DElncRNAs were predicted via cis and trans interactions, and functional and pathway analyses were performed. Gene ontology functions and Kyoto encyclopedia of genes and genomes analysis revealed that lncRNA-targeted genes mainly participated in metabolic pathways, cellular processes, immune system processes, digestive systems, and transport activities. To reveal the mechanism underlying starvation stress, the interaction network between lncRNAs and their targets was constructed based on 26 DElncRNAs and 72 DEmRNAs. We performed an interaction network analysis of 121 DElncRNA–DEmRNA pairs with a Pearson correlation coefficient greater than 0.99. Conclusion: We found that MSTRG.19894.13, MSTRG.16726.3, and MSTRG.12176.1 might play important roles in starvation stress. This study not only generated a library of enriched lncRNAs in piglets, but its outcomes also provide a strong foundation to screen key lncRNAs involved in starvation stress and a reference for subsequent in-depth research. Objective: In this study, we aimed to identify long non-coding RNAs (lncRNAs) that play important roles in starvation stress, analyze their functions, and discover potential molecular targets to alleviate starvation stress to provide a theoretical reference for subsequent in-depth research.Methods: We generated a piglet starvation stress animal model. Nine Yorkshire weaned piglets were randomly divided into a long-term starvation stress group (starved for 72 h), short-term starvation stress group (starved for 48 h), and the control group. LncRNA libraries were constructed using high-throughput sequencing of piglet ileums.Results: We obtained 11,792 lncRNAs, among which, 2,500 lncRNAs were novel. In total, 509 differentially expressed (DE)lncRNAs were identified in this study. Target genes of DElncRNAs were predicted via cis and trans interactions, and functional and pathway analyses were performed. Gene ontology functions and Kyoto encyclopedia of genes and genomes analysis revealed that lncRNA-targeted genes mainly participated in metabolic pathways, cellular processes, immune system processes, digestive systems, and transport activities. To reveal the mechanism underlying starvation stress, the interaction network between lncRNAs and their targets was constructed based on 26 DElncRNAs and 72 DEmRNAs. We performed an interaction network analysis of 121 DElncRNA–DEmRNA pairs with a Pearson correlation coefficient greater than 0.99.Conclusion: We found that MSTRG.19894.13, MSTRG.16726.3, and MSTRG.12176.1 might play important roles in starvation stress. This study not only generated a library of enriched lncRNAs in piglets, but its outcomes also provide a strong foundation to screen key lncRNAs involved in starvation stress and a reference for subsequent in-depth research.

Optimization of the Field Shaper Parameters in Electromagnetic Pulse Crimping of Cable

Fen-Qiang Li,Jishuai Jiang,Hongsong Cheng,Jianling Xu,Xiaohong Ge,Hui Li,Jun Zhao,Yang Ran 한국정밀공학회 2021 International Journal of Precision Engineering and Vol.22 No.10

Crimping of wires to achieve a secure connection is one of the most critical challenges in fabrication of electronic circuit boards, automobiles, aviation, satellite and communication components. The electromagnetic pulse crimping process offers great potential to successfully address these challenges. In this paper, ANSYS/Multi physical software was used to first determine the electromagnetic force distribution on the terminal lug by analyzing the magnetic field in the electromagnetic pulse crimping process. The electromagnetic force was then imported into the ABAQUS/Explicit software as the boundary condition to calculate the deformation behavior of the terminal lug barrel and cable according to the stress–strain curve of the terminal material under high strain rate. The calculated deformation result was subsequently verified by experimental data. Three main parameters of the field shaper were analyzed to determine their influence on the crimping result; slit position, the inner diameter vertical dimension and the position relationship between the terminal lug and field shaper. Then using the empirical formula we calculated and verified the inner diameter vertical dimension of the field shaper. The model proved to be reliable. Deformation of the terminal was determined to be uneven along the circumference in the crimping area. For the type of terminal lug studied, an inner diameter vertical dimension of 10 mm proved to be optimum for increased strength of the crimped terminal connection. Allowing the terminal to protrude 1 mm from the field shaper resulted in a flatter crimped area and significant improvement in the quality of the crimped barrel surface. The empirical formula for calculating the inner diameter vertical dimension of the field shaper is reasonable and reliable, and the calculated measurement resulted in improved connection strength. The results of this research can be used to guide the electromagnetic pulse crimping of other terminal lug and cable types.

Parameter optimization of electromagnetic pulse compaction driven by aluminum tube for tungsten copper powder

Fen-Qiang Li,Juehao Ding,Miao Zheng,Jianlin Xu,Xiaohong Ge,Hui Li,Jun Zhao 대한기계학회 2023 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.37 No.7

A combination of multi-physics numerical simulation and experiment was conducted to study the magnetic pulse compaction technology driven by two aluminum tubes of tungsten copper powder. Then, the effects of different process parameters on the density and uniformity of the compact were studied by tuning the thickness of the pack and driver tubes and the gap between them. Results show that the density of compact is the highest when the thickness of the driver tube is 1.0 mm. More energy is consumed for force conduction as the thickness of the pack tube increases. Thus, the density of the compact is the highest when the thickness of the packer tube is 0.8 mm. The speed of the driver tube impacting the pack tube also increases with the rise in the gap. Accordingly, the compaction density with the gap of 1.5 mm is the highest under the same other parameters.