Fabrication of highly efficient coatable polarizer from tolane-based smectic reactive mesogen

He, Rui,Oh, Enche,Ye, Yang,Wen, Pushan,Jeong, Kwang-Un,Lee, Seung Hee,Li, Xiang-Dan,Lee, Myong-Hoon Elsevier 2019 Polymer Vol.176 No.-

<P><B>Abstract</B></P> <P>This work is aimed to fabricate ultra-thin coatable polarizers on a single substrate based on “host-guest” effect between highly ordered smectic reactive mesogen (RM) and dichroic dye. We designed and synthesized a new tolane-based RM with a highly ordered smectic A phase at room temperature. Polymerizable “host-guest” mixture was formulated from the host RM, dichroic dye and additives, then spin-coated on a single substrate having an alignment layer. Subsequent in-situ photopolymerization by UV irradiation successfully resulted in a coatable polarizer with good polarizing properties. The fabricated coatable polarizer showed a dichroic ratio (DR) of 16.4 and a degree of polarization (DOP) of 99.3% with the thickness of 4 μm. The resulting coatable polarizer possessed a considerable solvent resistance, good thermal stability and robust mechanical properties. Moreover, we prepared a TN-mode LC cell by using the prepared coatable polarizers inside the cell (in-cell), in which the coatable polarizers acted as a polarizer and an alignment layer, simultaneously. The resulting TN cell with in-cell polarizers exhibited a decent electro-optical behavior. We believe that the coatable polarizer proposed in this study possesses practical application potential in ultra-thin LCDs or flexible OLEDs.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Reactive mesogen with smectic A phase was synthesized for coatable polarizer. </LI> <LI> Coatable polarizer was fabricated on a single substrate by “host-guest” method. </LI> <LI> Coatable polarizer exhibits considerable optical property and excellent stability. </LI> <LI> LCD with in-cell structure was demonstrated by using the prepared coatable polarizer. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

In-situ photocrosslinked hydroxide conductive membranes based on photosensitive poly(arylene ether sulfone) block copolymers for anion exchange membrane fuel cells

He, Rui,Wen, Pushan,Zhang, Hai-Ning,Guan, Shumeng,Xie, Guangyong,Li, Li-Zhong,Lee, Myong-Hoon,Li, Xiang-Dan Elsevier 2018 Journal of membrane science Vol.556 No.-

<P><B>Abstract</B></P> <P>A series of photocrosslinkable multi-block poly(arylene ether sulfone) copolymers containing various block lengths of hydrophilic segments were synthesized. For comparison, a series of random poly(arylene ether) copolymers were also synthesized. The anion exchange membranes(AEMs) were fabricated and in-situ photocrosslinking was carried out by UV irradiation in a swollen state. The microphase-separated morphologies of the multi-block membranes were characterized by SAXS and TEM experiments, and the membrane properties were investigated by measuring ion exchange capacity (IEC), water uptake, water swelling ratio, ionic conductivity, methanol permeability and alkaline stability. IECs and water uptakes of the crosslinked multi-block membranes were in the range of 1.11–1.42 meq g<SUP>−1</SUP> and 14.36–31.01% at 20 °C, respectively. The hydroxide conductivity was in the range of 11.38–25.00 mS cm<SUP>−1</SUP> at 20 °C, and showed a maximum value of 178.77 mS cm<SUP>−1</SUP> at 100 °C. The multi-block membranes exhibited low methanol permeability (2.75 × 10<SUP>−7</SUP> cm<SUP>2</SUP> s<SUP>−1</SUP>) at room temperature, which is one order of magnitude lower than that of Nafion® 117 (23.8 × 10<SUP>−7</SUP> cm<SUP>2</SUP> s<SUP>−1</SUP>). The crosslinked membranes showed excellent dimensional stability and alkaline stability with only a slight decrease in ionic conductivity. All the multi-block membranes showed superior properties compared to their corresponding random copolymers.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Multi-block poly(arylene ether sulfone) copolymers were synthesized for AEMs. </LI> <LI> <I>In-situ</I> photo-crosslinking was carried out by UV irradiation in hydrated states. </LI> <LI> The block copolymers exhibited hydrophilic/hydrophobic phase separated morphology. </LI> <LI> The block copolymers showed superior properties compare to the random copolymers. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

Syntheses and characterizations of high refractive index and low birefringence polyimides containing spirobifluorene in the side chain

Wen, Pushan,He, Rui,Li, Xiang-Dan,Lee, Myong-Hoon Elsevier 2017 Polymer Vol.117 No.-

<P><B>Abstract</B></P> <P>Two new diamine monomers having a spirobifluorene structure were synthesized through four steps, and polymerized with three different dianhydrides (PMDA, CBDA and 6FDA) to obtain six polyimides with spirobifluorene structure in the side chain. All the resulting polyimides displayed excellent thermal stability and high glass transition temperature. These polyimides synthesized from CBDA and 6FDA showed good solubility in typical organic solvents such as NMP, DMF and DMSO. Transparent and flexible cast films can be obtained from soluble polyimides or poly(amic acid) solution. The transmittance of polyimide films was higher than 90% in the visible wavelength range (higher than 80% in case of polyimide containing PMDA). The refractive indices of the result polyimides were found to be in the range from 1.6343 to 1.7007, which is higher than that of normal polymers. In addition, the optical birefringences of these polyimides were extremely low (0.0005–0.0014). The high refractive index and low birefringence of these polyimides as well as other descent physical and thermal properties would offer them possible applications in high performance optical materials such as flexible substrates.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Novel polyimides containing 9,9’-spirobifluorene unit in the side chain were synthesized. </LI> <LI> The polyimides exhibit high thermal stability (T5 > 420 °C) with excellent optical properties such as high transparency (>90% at 400 nm), high refractive index (1.6342–1.7007) and low birefringence (0.0005–0.0014). </LI> <LI> The resulting polymer materials could be promising candidates for advanced optical applications. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>Novel polyimides containing 9,9′-spirobifluorene unit in the side chain, which exhibit high transparency, high refractive index and low birefringence, have been developed as promising candidates for advanced optical applications.</P> <P>[DISPLAY OMISSION]</P>

Detection of Antibodies Against DNA Polymerase of Hepatitis B Virus in HBsAg - Positive Sera Using ELISA

(Li Xiang Rui),(Young Min Park),(Jong Yong Choi),(Boo Sung Kim),(Guhung Jung) 대한내과학회 1998 The Korean Journal of Internal Medicine Vol.13 No.2

N/A Objectives:DNA polymerase (pol) of Hepatitis B virus (HBV) includes 3 different domains such as terminal protein (TP), reverse transcriptase (RT) and RNase H. Humoral immune responses to each of these proteins have not been well documented previously, although antibody to pol was detected in serum of patients with chronic hepatitis B. We have constructed TP (amino acids 1-182), RT (amino acids 346-685) and RNase H (amino acids 690-832). Methods:By ELISA using each protein expressed in E. coli as antigens, the corresponding antibodies were tested in serum from 40 patients with type B viral chronic liver diseases. (20 HBeAg-positive and 20 HBeAg-negative). As negative controls, sera from 3 healthy young men were used. With the mean values of the OD, which were tested 4 times per each test sample and 3 times per each control sample, we considered to be positive if the mean OD of each test sample is 2-fold or higher than that of controls. Results:Five of 40 sera (12.5%) contained one or two different antibodies detectable by this method: 4 of 20 HBeAg-positive sera (20%) and 1 of 20 HBeAg-negative sera (5%). Anti-TP, anti-RT and anti-RNase H antibodies were detected in 2.5% (1/40), 10% (4/40) and 7.5% (3/40), respectively. Among 4/20 HBeAg-positive ELISA-positive sera, anti-TP, anti-RT and anti-RNase H were positive in 5% (1/20), 20% (4/20) and 10% (2/20), respectively, while 1 HBeAg-negative ELISA-positive sera were positive only for anti-RNase H. Conclusions:These results suggest that the corresponding antibody responses to individual recombinant peptides derived from 3 domains of DNA polymerase may tend to be detected more frequently in HBeAg-positive sera than in HBeAg-negative sera from various patients with type B viral chronic liver diseases.

Fancd2os Reduces Testosterone Production by Inhibiting Steroidogenic Enzymes and Promoting Cellular Apoptosis in Murine Testicular Leydig Cells

Xiang Zhai,Xin-yang Li,Yu-jing Wang,Ke-ru Qin,Jin-rui Hu,Mei-ning Li,Hai-long Wang,Rui Guo 대한내분비학회 2022 Endocrinology and metabolism Vol.37 No.3

Background: It is well-established that serum testosterone in men decreases with age, yet the underlying mechanism of this changeremains elusive. Methods: The expression patterns of Fancd2 opposite-strand (Fancd2os) in BALB/c male mice and testicular tissue derived celllines (GC-1, GC-2, TM3, and TM4) were assessed using real-time polymerase chain reaction (RT-PCR), Western blot and immunofluorescence. The Fancd2os-overexpressing or knockdown TM3 cells were constructed by infecting them with lentivirus particlesand were used to evaluated the function of Fancd2os. The testosterone production was measured using enzyme linked immunosorbent assay (ELISA) and the steroidogenic enzymes such as steroidogenic acute regulatory protein (StAR), P450 cholesterol sidechain cleavage (P450scc), and 3β-hydroxysteroid dehydrogenase (3β-HSD) were analysed using RT-PCR. The apoptosis of TM3cells induced by ultraviolet light or testicular tissues was detected using flow cytometry, Western blot or dUTP-biotin nick end labeling (TUNEL) assays. Pearson correlation analysis was used to assess the correlation between the Fancd2os expression and TUNELpositive staining in mouse testicular Leydig cells. Results: The Fancd2os protein was predominantly expressed in mouse testicular Leydig cells and its expression increased with age. Fancd2os overexpression inhibited testosterone levels in TM3 Leydig cells, whereas knockdown of Fancd2os elevated testosteroneproduction. Fancd2os overexpression downregulated the levels of StAR, P450scc and 3β-HSD, while Fancd2os knockdown reversed this effect. Fancd2os overexpression promoted ultraviolet light-induced apoptosis of TM3 cells. In contrast, Fancd2os knockdown restrained apoptosis in TM3 cells. In vivo assays revealed that higher Fancd2os levels and mouse age were associated with increased apoptosis in Leydig cells and decreased serum testosterone levels. Pearson correlation analysis exhibited a strong positivecorrelation between the expression of Fancd2os and TUNEL-positive staining in mouse testicular Leydig cells. Conclusion: Our findings suggest that Fancd2os regulates testosterone synthesis via both steroidogenic enzymes and the apoptoticpathway.

Roadway Engineering Mechanical Properties and Roadway Structural Instability Mechanisms in Deep Wells

Xiang-Rui Meng,Rui Peng,Guang-Ming Zhao,Ying-Ming Li 대한토목학회 2018 KSCE JOURNAL OF CIVIL ENGINEERING Vol.22 No.5

We proposed a new classification method for stress-bearing structures in very-deep roadways. We conducted tests for roadwayengineeringmechanical properties, including rock mechanical tests and ground stress measurement of two caverns in very-deepwells. We suggested a classification method for stress-bearing structures based on shear stress. Tests revealed that rock strength in theshear direction was the lowest; the stress distributions of acoustic emission and hollow inclusion were highly similar. Based on theroadway-engineering mechanical properties of two caverns and numerical simulation and in-situ tests, the key bearing structureswere classified based on the concentrated shear stress. In deep caverns, shear stress was more concentrated on the softer surroundingrock, the key bearing structure areas, and the more seriously fractured surrounding rocks. Using the loose circle in-situ test, wecompared the classification method of the key bearing structures with other classification methods. The results revealed agreementwith the classification methods used for the key bearing structures. The deformation in-situ test showed that the strata convergence ofconcentrated shear stress areas developed quickly. Therefore, the phenomena of concentrated shear stress and the expanded range ofkey bearing structures are the structural instability mechanisms of deep roadways.

Energy Absorption Characteristics of Crash Box of New Honeycomb Core Structure with Foam-Filled

Xiang Li,Yanmiao Wang,Xingxing Xu,Xiangbin Cao,Rui Li 한국자동차공학회 2021 International journal of automotive technology Vol.22 No.1

By combining honeycomb core with the traditional crash box, an innovative foam-filled honeycomb core structure crash box is proposed to improve safety performances. Three kinds of honeycomb core crash boxes were obtained by filling the inside of the traditional crash box with the quasi-honeycomb core, the quasi-square honeycomb core and hexagonal honeycomb core. It is deduced that the energy absorption of the quasi-honeycomb core crash box increased by 42.2 %, the peak of the collision force reduced by 8.9 %. The hexagonal honeycomb core crash box and the quasi-square honeycomb core crash box also enhance the energy absorption characteristics, but the peak impact force increased by 5.6 % and 9.6 %. After filling of the Expanded Polypropylene (EPP) foam, the peak collision force of the EPP hexagonal honeycomb core crash box and the EPP quasi-square honeycomb core crash box increased by 10 %, while Fmax of the EPP quasi-honeycomb core crash box reduced by 2.3 % and the energy absorption increased by 54.6 %. Six structures were compared to highlight the energy absorption characteristics of the filling the inside of the traditional crash box with the light in weight honeycomb core and EPP foam. The research results provide a new idea for the design of crash box.

Genetic Diversity of a Chinese Native Chicken Breed, Bian Chicken, Based on Twenty-nine Microsatellite Markers

Ding, Fu-Xiang,Zhang, Gen-Xi,Wang, Jin-Yu,Li, Yuan,Zhang, Li-Jun,Wei, Yue,Wang, Hui-Hua,Zhang, Li,Hou, Qi-Rui Asian Australasian Association of Animal Productio 2010 Animal Bioscience Vol.23 No.2

The level of genetic differentiation and genetic structure in a Chinese native chicken breed, Bian chicken, and two controlled chicken populations (Jinghai chicken and Youxi chicken in China) were analysed based on 29 microsatellite markers. A total of 166 distinct alleles were observed across the 3 breeds, and 32 of these alleles (19.3%) were unique to only 1 breed. Bian chicken carried the largest number of private alleles at 15 (46.9%), followed by the Jinghai chicken with 12 private alleles (37.5%). The average polymorphism information content (0.5168) and the average expected heterozygote frequency (0.5750) of the Bian chicken were the highest, and those of the Jinghai chicken were 0.4915 and 0.5505, respectively, which were the lowest. Among 29 microsatellite loci, there were 15 highly informative loci in Bian chicken, and the other 14 were reasonably informative loci. The highly informative loci in Jinghai chicken and Youxi chicken were 17 and 14 respectively. Significant deviations from the Hardy-Weinberg equilibrium were observed at several locus-breed combinations, showing a deficit of heterozygotes in many cases. As a whole, genetic differentiation among the breeds estimated by the fixation index (Fst) were at 6.7% (p<0.001). The heterozygote deficit within population (Fis) was 22.2% (p<0.001), with the highest (0.249) in Bian chicken and lowest (0.159) in Youxi chicken. These results serve as an initial step in the plan for genetic characterization and conservation of the Chinese chicken genetic resource of Bian, as well as Jinghai and Youxi chickens.

Stanniocalcin-1 protects bovine intestinal epithelial cells from oxidative stress-induced damage

Li-ming Wu,Rui Guo,Lin Hui,Yong-gang Ye,Jing-mei Xiang,Chun-yun Wan,Miao Zou,Rui Ma,Xiao-zhuan Sun,Shi-jin Yang,Ding-zong Guo 대한수의학회 2014 JOURNAL OF VETERINARY SCIENCE Vol.15 No.4

Chronic enteritis can produce an excess of reactive oxygenspecies resulting in cellular damage. Stanniocalcin-1(STC-1)reportedly possesses anti-oxidative activity, the aim of thisstudy was to define more clearly the direct contribution ofSTC-1 to anti-oxidative stress in cattle. In this study, primaryintestinal epithelial cells (IECs) were exposed to hydrogenperoxide (H2O2) for different time intervals to mimic chronicenteritis-induced cellular damage. Prior to treatment with 200μM H2O2, the cells were transfected with a recombinantplasmid for 48 h to over-express STC-1. Acridine orange/ethidium bromide (AO/EB) double staining and trypan blueexclusion assays were then performed to measure cell viabilityand apoptosis of the cells, respectively. The expression of STC-1and apoptosis-related proteins in the cells was monitored byreal-time PCR and Western blotting. The results indicated thatboth STC-1 mRNA and protein expression levels positivelycorrelated with the duration of H2O2 treatment. H2O2 damagedthe bovine IECs in a time-dependent manner, and this effectwas attenuated by STC-1 over-expression. Furthermore, overexpressionof STC-1 up-regulated Bcl-2 protein expression andslightly down-regulated caspase-3 production in the damagedcells. Findings from this study suggested that STC-1 plays aprotective role in intestinal cells through an antioxidant mechanism.

Dynamic Response and Long-Term Settlement of a Compacted Loess Embankment under Moving Train Loading

Rui Wang,Zhiping Hu,Jiakuan Ma,Xiang Ren,Fangtao Li,Fei Zhang 대한토목학회 2021 KSCE JOURNAL OF CIVIL ENGINEERING Vol.25 No.11

There have been many railway construction projects in the loess region of China. Embankment is typically required for rail projects in these regions, since the railway basement is restricted by longitudinal slope requirements. However, there has been little study of the dynamic response of compacted loess embankment under moving train loading. The 2.5D finite element method was adopted to investigate this process and characterize the effects of train speed, height of embankment, and axle weight on the dynamic behavior of subgrade. A rectangular core zone of subgrade was determined, and a prediction model was established to evaluate the long-term settlement of embankment generated by moving train loading. The results showed that embankment height had negligible influence on the variation of dynamic stress. Decays of stress amplitude in both the vertical and horizontal directions slowed with increased train speed. Additionally, the dynamic stress increased linearly with the increase in axle weight due to the linear stress-strain relationship of soil. In the practical speed range (≤ 100 m/s), the dynamic influence depth increased with increasing speed in a range of 3 − 6 m. A core zone depth of 6 m reflects the effects of moving train loading, with a width of 4 m. For practical conditions (v ≤ 100 m/s), only slight settlement of embankment was observed (≤ 6 mm). However, it is difficult to achieve the same physical parameters used in the experiments (moisture content and compaction degree) in engineering practice. Further work should explore long-term dynamic settlement with relation to the degree of compaction of the embankment.