푸른길 공원의 대기 환경 특성에 관한 연구

민경우,이경석,박옥현,윤관주,김도술,박세일,정원삼,이대행,조영관,Min, Kyoung-Woo,Lee, Kyoung-Soek,Park, Ok-Hyun,Yoon, Kwan-Ju,Kim, Do-Sool,Park, Se-Il,Jeung, Won-Sam,Lee, Dae-Hang,Cho, Young-Gwan 한국환경보건학회 2015 한국환경보건학회지 Vol.41 No.3

Objectives: This study aimed to survey the characteristics of air quality and meteorological conditions in a greenway park. Methods: We measured meteorological and health related factors, including noise, particulate matter ($PM_{10}$) and selected gaseous air pollutants at three locations in a greenway park and on a general roadside as comparison. The measurements were repeated four times from April to October 2014. Results: The average air temperature in the greenway park was $20.7^{\circ}C$ which was $1-2^{\circ}C$ lower than on the general roadside. The average $PM_{10}$ concentration in the greenway park was $85.0{\mu}g/m^3$, a level 2-3 times lower than that at the roadside. The noise level at the greenway site was 4.4 dB(A)- 23.0 dB(A) lower than at the roadside. The average CO, $CO_2$, $SO_2$ and NOx concentrations in the greenway park were lower than at the roadside. The average phytoncide and anions concentrations in the greenway park were higher than at the roadside. Conclusions: The urban forest of the greenway park may have some impact on air quality and meteorological conditions.

한국 국립공원 산림생태계의 수목 탄소저장량 평가

이상진,박홍철,박관수,김현숙,이창민,김진원,심규원,최승운,Lee, Sang-Jin,Park, Hong-Chul,Park, Gwan-Soo,Kim, Hyoun-Sook,Lee, Chang-Min,Kim, Jin-Won,Sim, Gyu-Won,Choi, Seung-Woon 한국환경복원기술학회 2022 한국환경복원기술학회지 Vol.25 No.3

The purpose of this study is to quantitatively evaluate the amount of carbon storage for trees in forest ecosystem to support the foundation for carbon neutrality implementation in Korea National Park. It targeted 22 national parks designated and managed as national parks in Korea, and conducted research on forest trees in the terrestrial ecosystem among various natural and ecological carbon sink. The survey and analysis method followed the IPCC guidelines and the National Greenhouse Gas Inventory in Korea. The amount of tree carbon storage in the forest ecosystem of Korea National Park was confirmed to be about 218,505 thousand CO₂-ton and the amount of carbon storage per unit area was 570.8 CO₂-ton per hectare. Compared to 299.7 CO₂-ton per hectare, the average carbon storage per unit area of the entire Korean forest, it was found that about twice as much carbon was stored when assuming the same area. In other words, it means that the tree carbon storage function of the national park is about twice as high as that of the average tree carbon storage function of entire Korean forest. It has great implications in Korea National Park not only provides biodiversity promotion and exploration services as a national protected area, but also performs excellent functions as a carbon sink.

The Korean Association of lnternal Medicine : Poster Session ; PS 1357 : Nephrology ; Age is the Strongest Effector for the Relationship between Estimated Glomerular filtration Rate and Coronary Artery Calcifi cation in Apparently Healthy Korean Adults

( Hyun Beom Chae ),( Eun Jung Rhee ),( Hae Jung Park ),( Min Kyung Lee ),( Won Seon Jeon ),( Se Eun Park ),( Cheol Young Park ),( Won Young Lee ),( Ki Won Oh ),( Sung Woo Park ) 대한내과학회 2014 대한내과학회 추계학술대회 Vol.2014 No.1

Background: Cardiovascular disease (CVD) is a major clinical problem and the most common cause of morbidity and mortality in patients with chronic kidney disease (CKD). Coronary artery calcifi cation (CAC) is a potential mechanism that explains the association between renal function and cardiovascular mortality. We aimed to evaluate the association between renal function and CAC in apparently healthy Korean subjects. Methods: In 23,617 participants in the health screening program in Kangbuk Samsung Hospital health screening program from January 2010 to December 2011, estimated glomerular fi ltration rate (eGFR) was assessed by Cockcroft-Gault equation. Coronary artery calcium score (CACS) was measured by multi-detector computed tomography (MDCT). Subjects were divided into 3 groups according to the CKD Staging system with eGFR grade; stage 1: eGFR = 90 mL/min/1.73 m2, stage 2: eGFR 60-89 mL/ min/1.73 m2, stage 3: eGFR 30-59 mL/min/1.73 m2. Results: Mean age of the participants was 41.4 years, and mean eGFR was 103.6±21.7 mL/min/1.73 m2. Hypertension and diabetes were noted in 43.7% and 5.5% of the participants, respectively. eGFR showed weakly negative but signifi cant association with CACS in bivariate correlation analysis (r=-0.076, p<0.01). Mean CACS signifi cantly increased from CKD stage 1 to 3. The proportion of subjects who had CAC signifi cantly increased from CKD stage 1 to 3. Although odds ratio for CAC signifi cantly increased from stage 1 to 3 after adjustment for confounding factors, this signifi cance was inversed when age was included in the model. Age was the strongest factor that affects CAC. Conclusions: This study performed in young Korean subjects with relatively normal renal function, age was the mostly strongest effector on the association between eGFR and the degree of CAC.

가압가열 및 Microwave 처리가 생면의 품질에 미치는 영향

박시우,김꽃봉우리,김민지,강보경,박원민,김보람,박홍민,최정수,최호덕,안동현,Bark, Si-Woo,Kim, Koth-Bong-Woo-Ri,Kim, Min-Ji,Kang, Bo-Kyeong,Pak, Won-Min,Kim, Bo-Ram,Park, Hong-Min,Choi, Jung-Su,Choi, Ho-Duk,Ahn, Dong-Hyun 한국식품영양학회 2013 韓國食品營養學會誌 Vol.26 No.4

중력분을 이용하여 제면한 후 가압가열, microwave 및 가압가열과 microwave 병행 처리한 후, 생면 및 삶은 면의 품질에 미치는 영향에 대하여 알아보았다. 생면의 pH는 microwave 1 min 처리구에서 무처리구와 유의적인 차이를 보이지 않았으며, 수분 함량은 autoclave 50 min 처리구에서 무처리구와 유의적인 차이를 보이지 않았고, 그 외의 처리구에서는 모두 수분 함량이 감소함을 확인하였다. 면의 색도 측정 결과는 명도는 무처리구에 비해 모든 처리구에서 감소하였으며, 적색도는 microwave 1 min 처리구는 감소한 반면, 나머지 처리구는 증가하였다. 황색도는 autoclave 50 min 처리구와 autoclave 50 min/microwave 1 min 병행 처리구에서 증가한 반면, 나머지 물리적 처리구에서는 감소하였다. 삶은 면의 색도에서는 명도, 적색도, 황색도 모두에서 무처리구에 비하여 물리적 처리구에서 증가한 값을 나타내었다. 물성 측정 결과는 경도, 부착성, 응집성, 검성, 복원성에서 무처리구와 비교시 microwave 1 min 처리구는 유의적으로 감소하였으며, 그 외 처리구에서는 유의적으로 증가한 값을 나타내었다. 탄력성과 전단력은 모든 처리구에서 유의적으로 증가하였으며, 인장력은 가압가열 30 min 처리구와 무처리구가 유의적인 차이를 보이지 않았으나, 나머지 물리적 처리구에서는 유의적으로 증가하였다. 관능 평가 결과는 생면의 경우 색 항목에서 물리적 처리구들이 유의적으로 낮은 점수를 받았다. 맛, 질감, 향 항목에서는 무처리구와 물리적 처리구간 유의적 차이를 보이지 않았다. 전체적인 기호도에서는 microwave 1 min 처리구가 가장 높은 점수를 얻었으며, 가압가열(50 min)과 microwave(1 min) 병행 처리구는 무처리구와 비슷한 점수를 얻었다. 따라서 제면 후 가압가열 및 microwave 처리가 생면 및 삶은 면에 있어서 색과 질감 항목을 보완, 개선시킨다면 알러겐성이 저감화된 면을 제품화하는데 적합할 것으로 사료되어진다. This study was conducted to determine the effects of physical treatments for quality of wet noodles. Noodles were being tried with a microwave (for 1 min), an autoclave (for 30 or 50 min), and both autoclave and microwave (for 30/1 min or 50/1 min). The results showed that the pH levels were slightly decreased after treatments of autoclave and autoclave/microwave. The moisture contents were considerably decreased as compared to the control except autoclave (50 min). After all treatments, the lightness was decreased in all samples, but, redness was increased (except microwave) and the yellowness was increased after autoclave (50 min) and autoclave/microwave (50/1 min). Texture was increased as compared to the control except microwave. In the sensory evaluation, the noodles treated with microwave, autoclave (50 min), and autoclave/ microwave (50/1 min) showed a high score in overall preference. From these results, both the autoclave and microwave methods can be applied to the wet noodles without diminishing its quality to a great extent.

Characterizations of Modified Silica Nanoparticles(I)

Min, Seong-Kee,Park, Chan-Young,Lee, Won-Ki,Seul, Soo-Duk Materials Research Society of Korea 2012 한국재료학회지 Vol.22 No.6

(3-mercaptopropyl)trimethoxysilane (MPTMS) was used as a silylation agent, and modified silica nanoparticles were prepared by solution polymerization. 2.0 g of silica nanoparticles, 150 ml of toluene, and 20 ml of MPTMS were put into a 300 ml flask, and these mixtures were dispersed with ultrasonic vibration for 60 min. 0.2 g of hydroquinone as an inhibitor and 1 to 2 drops of 2,6-dimethylpyridine as a catalyst were added into the mixture. The mixture was then stirred with a magnetic stirrer for 8 hrs. at room temperature. After the reaction, the mixture was centrifuged for 1 hr. at 6000rpm. After precipitation, 150 ml of ethanol was added, and ultrasonic vibration was applied for 30 min. After the ultrasonic vibration, centrifugation was carried out again for 1 hr. at 6000rpm. Organo-modification of silica nanoparticles with a ${\gamma}$-methacryloxypropyl functional group was successfully achieved by solution polymerization in the ethanol solution. The characteristics of the ${\gamma}$-mercaptopropyl modified silica nanoparticles (MPSN) were examined using X-ray photoelectron spectroscopy (XPS, THERMO VG SCIENTIFIC, MultiLab 2000), a laser scattering system (LSS, TOPCON Co., GLS-1000), Fourier transform infrared spectroscopy (FTIR, JASCO INTERNATIONL CO., FT/IR-4200), scanning electron microscopy (SEM, HITACHI, S-2400), an elemental analysis (EA, Elementar, Vario macro/micro) and a thermogravimetric analysis (TGA, Perkin Elmer, TGA 7, Pyris 1). From the analysis results, the content of the methacryloxypropyl group was 0.98 mmol/g and the conversion rate of acrylamide monomer was 93%. SEM analysis results showed that the organo-modification of ultra-fine particles effectively prevented their agglomeration and improved their dispensability.

An Investigation of the Stability of Y₂O₃ and Sintering Behavior of Fe-Based ODS Particles Prepared by High Energy Ball Milling

Park, Eun-Kwang,Hong, Sung-Mo,Park, Jin-Ju,Lee, Min-Ku,Rhee, Chang-Kyu,Seol, Kyeong-Won The Korean Powder Metallurgy Institute 2013 한국분말재료학회지 (KPMI) Vol.20 No.4

Fe-based oxide dispersion strengthened (ODS) powders were produced by high energy ball milling, followed by spark plasma sintering (SPS) for consolidation. The mixed powders of 84Fe-14Cr-$2Y_2O_3$ (wt%) were mechanically milled for 10 and 90 mins, and then consolidated at different temperatures ($900{\sim}1100^{\circ}C$). Mechanically-Alloyed (MAed) particles were examined by means of cross-sectional images using scanning electron microscopy (SEM). Both mechanical alloying and sintering behavior was investigated by X-ray diffraction (XRD) and high resolution transmission electron microscopy (HR-TEM). To confirm the thermal behavior of $Y_2O_3$, a replica method was applied after the SPS process. From the SEM observation, MAed powders milled for 10 min showed a lamella structure consisting of rich regions of Fe and Cr, while both regions were fully alloyed after 90 min. The results of sintering behavior clearly indicate that as the SPS temperature increased, micro-sized defects decreased and the density of consolidated ODS alloys increased. TEM images revealed that precipitates smaller than 50 nm consisted of $YCrO_3$.

Layer-controlled thinning of black phosphorus by an Ar ion beam

Park, Jin Woo,Jang, Sung Kyu,Kang, Dong Ho,Kim, Doo San,Jeon, Min Hwan,Lee, Won Oh,Kim, Ki Seok,Lee, Sung Joo,Park, Jin-Hong,Kim, Kyong Nam,Yeom, Geun Young Royal Society of Chemistry 2017 Journal of Materials Chemistry C Vol.5 No.41

<▼1><P>BP thinning was carried out using a monoenergetic Ar<SUP>+</SUP> ion beam and the BP could be thinned without damaging the surface.</P></▼1><▼2><P>Black phosphorus (BP) is one of the most interesting two-dimensional (2D) layered materials due to its unique properties, including a band gap energy change from 0.3 eV (bulk) to 2.0 eV (monolayer) depending on the number of BP layers, for application in nanoelectronic devices. In general, 2D layered materials including BP have limitations in terms of synthesis due to the process factors such as time, temperature, <I>etc.</I>, and thus, a thinning technique from the bulk material to a 2D material needs to be used while controlling the removed layer thickness. In this study, layer-controlled thinning of BP was performed by using a controlled Ar<SUP>+</SUP> ion beam method and the BP thinning characteristics were investigated. By using the near monoenergetic ion energy in the range of 45–48 eV, BP could be thinned with the thinning rate of ∼0.55 nm min<SUP>−1</SUP> down to bilayer BP without increasing the surface roughness and without changing the chemical binding states. The BP oxide on the pristine BP could also be successfully removed using the same Ar<SUP>+</SUP> ion beam. 2D BP field-effect transistors (FETs) fabricated with the thinned bilayer–10-layer BPs exhibited electrical characteristics similar to those of pristine BP FETs suggesting no electrical damage on the BP layers thinned by the controlled monoenergetic Ar<SUP>+</SUP> ion beam.</P></▼2>

선인장 양심실 보조장치의 설계 및 임상적용을 위한 평가

민병구,박찬영,최재순,이혁수,황창모,김삼성,윤걸중,김종원,선경,이경갑,정종태,김원곤 제주대학교 인공심장이식연구소 2001 인공심장 연구 Vol.2 No.1

현재 개발되고 있는 맥동형 이식형 인공심장은 완전이식형 인공심장과 좌심실보조장치 뿐이다. 좌심실보조장치를 장착한 환자의 10~15%가 우심실의 보조를 필요로하고 완전이식형 인공심장의 장착을 위해서는 자연심장을 제거해야하는 상황에서 이식형 양심실보조장치에 대한 필요성이 대두되고 있다. 본 연구진은 완전이식형 인공심장으로 개발된 한국형 인공심장을 개선하여 양심 실 보조장치를 개발하였다. 양심실보조장치는 이동형 작동기식 미케니즘을 이용하고 있으며 에너지 변환장치와 감속기로 구성된 작동기와 혈액주머니, 그리고 내장형 제어기로 구성되어 있다. 선인장 펌프로 명명된 KAH350은 캐뉼라의 연결을 위한 커넥터를 포함하여 길이 177mm, 폭 164mm, 높이 67 이고 무게 780g이며 최대 심박출량은 5L/min 이다. 양심실보조장치로 개발된 선인장펌프는 좌심실보조장치로도 응용이 가능하다. 이식적합성과 생체적합성을 평가하기 위하여 좌심실보조장치로 5회, 양싱실보조장치로 6회의 동물실험을 수행하였다. 각각 최장 28일간 생존하였으며 11회의 동물실험중 장치의 결함에 의한 것이 3회 있었는데 이들은 모두 전자장치의 결함과 방수처리문제였다. 현재 이식적합성과 일박출량을 향상시킨 KAH400모델이 개발중이다. The types of pulsatile implantable artificial hearts that are on the way of development and have been developed are totally implantable artificial heart and implantable left ventricular assist device (LVAD). Approximately 10% to 15% of all patients Implanted with wearable VADs have required right heart support with another device. And it is reluctant to patient who should remove his or her own heart to be implanted with total artificial heart. These situations drive the development of implantable bi-ventricular assist device (BVAD). The Korean BVAD was develophed by modifying the moving actuator type Korean artificial heart. This electro-mechanical BVAD comprises actuator including energy converter and reduction gear train, blood sacs, and internal motor and energy controllers. The KAH350 which is named as 'Cactus Pump' is 177mm in length, 164mm in width, and 67mm in thickness including connectors and nuts. The weight and maximum cardiac output of Cactus Pump is 780g and 5L/min, respectively. The Cactus Pump that was developed as BVAD could be used as LVAD by attaching compliance caps on the 2 ports of one ventricle. The animal experiments were undergone 5 times for LVAD, and 6 times for BVAD. The best records were 28 days survival in both applications. There were 3 times of device failure and they were all associated with electrical connection and hermetic sealing. The KAH400 that has improved anatomical fitting characterisitcs and stroke volume is on development.

열처리에 의한 Morganella morganii와 Photobacterium phosphoreum 유래 Histidine Decarboxylase의 불활성화

박원민(Won-Min Pak),김꽃봉우리(Koth-Bong-Woo-Ri Kim),김민지(Min-Ji Kim),박지혜(Ji-Hye Park),배난영(Nan-Young Bae),박선희(Sun-Hee Park),안동현(Dong-Hyun Ahn) 한국식품영양과학회 2016 한국식품영양과학회지 Vol.45 No.3

Histamine을 생성하는 Morganella morganii와 Photobacterium phosphoreum으로부터 crude histidine decarboxylase(HDC)를 추출하여 65~121°C로 열처리한 다음 균의 생육 및 효소 활성 변화에 대해 살펴보았다. 그 결과 M. morganii와 P. phosphoreum은 모든 열처리 조건에서 비 가열 처리구와 비교 시 균의 생육이 저해됨을 확인하였다. M. morganii와 P. phosphoreum 유래 HDC의 효소 활성은 65°C에서 90% 이상의 효소 활성이 저해됨을 확인하였고, 온도가 증가함에 따라 유의적으로 활성이 억제되는 것으로 나타났다. SDS-PAGE 결과에서는 65~100°C 범위에서 비가열 처리구와 비교 시 조효소액의 단백질 패턴의 변화가 크지 않았으나, 121°C에서 단백질 band의 강도가 크게 약해졌다. Native-PAGE에서는 65°C 처리 조건에서부터 단백질 패턴의 변화가 크게 나타났다. 따라서 가열처리(65~121°C)는 histamine 생성균인 M. morganii와 P. phosphoreum의 생육을 억제할 뿐만 아니라 HDC의 효소 활성도가 저해됨을 확인하여, 식품산업에서 적용되고 있는 열처리 조건에서 histamine 생성 억제에 큰 효과가 있는 것으로 생각한다. This study was performed to investigate the effects of various thermal treatments on the growth of Morganella morganii and Photobacterium phosphoreum and activity of crude histidine decarboxylase (HDC) obtained from M. morganii and P. phosphoreum. Crude HDC and the two strains were treated at 65°C/30 min, 80°C/10 min, 100°C/10 min, and 121°C/10 min. Activity of crude HDC decreased with increasing temperature. Viable cells counts of M. morganii and P. phosphoreum were not detected in any heated samples. SDS-PAGE patterns of heated HDC did not show significant differences up to 100°C. However, at 121°C, protein band intensity was weakened. In native-PAGE, there was a major change in the pattern of HDC at 65°C. These results suggest that thermal treatment can help to reduce histamine production by reducing HDC activity and growth of M. morganii and P. phosphoreum.

국소성 분절성 사구체 경화증의 완전 관해 후 발병한 IgA 신병증 1예

임현민,김현정,박민석,주혜원,최원,김상현,박원도 인제대학교 2006 仁濟醫學 Vol.27 No.-

We report a rare case of primary glomerular disease with IgA nephropathy in a 43-year old man. 7-years ago, he was diagnosed with minimal change nephrotic syndrome. After treatment with steroid for 1-year, azotemia and proteinuria were improved. But, nephrotic range proteinuria was relapsed within 1 week after cessation of steroid. Renal biopsy revealed focal segmental glomerulosclerosis, and achived a complete remission with the use of steroids and cyclophosphamide. Then, he was followed up with normal renal function for 4-years. On admission, the patient showed generalized edema and marked proteinuria. In 3rd renal biopsy, mesangial proliferative glomerulonephritis with diffuse global sclerosis was observed. Electron microscopy showed electron-dense deposit on the mesangium with slight mesangial proliferation, and immunofluoroscence microscopy showed granular deposits of IgA and IgM. These features were consistent with IgA nephropathy, different from results of previous biopsies. The pathogenesis of IgA nephropathy occurred with primary FSGS is not clear, as well as treatment. Now, proteinuria is improving, steroid and cyclophosphamide are probably useful for the disease.