초등학교 고학년의 학업스트레스 감소를 위한 부모연계 집단상담 프로그램 개발

권규문,유형근,권순영 한국교육방법학회 2012 교육방법연구 Vol.24 No.1

본 연구의 목적은 초등학교 고학년을 대상으로 학업스트레스 감소를 위한 부모연계 집단상담 프로그램을 구안하고 효과를 검증하는 것이다. 이에 따라 본 프로그램은 조사, 분석, 설계, 구안 및 적용의 5단계로 이루어졌다. 조사단계는 초등학교 5학년 195명을 대상으로 요구조사를 실시하였다. 분석단계에서는 조사단계의 결과를 바탕으로 프로그램 목적, 회기별 목표, 회기 수를 결정하였다. 설계 및 구안단계에서는 목적, 목표, 회기별 목표에 따라 선별된 활동안을 이론전문가 및 현장전문가의 자문과정과 예비과정을 거쳐 수정 보완하여 최종 프로그램을 구안하였다. 적용단계에서는 본 연구의 가설검증을 위해 W초등학교 5학년을 대상으로 학업스트레스 검사를 실시하여, 점수가 M+1SD이상인 학생들을 연구대상자로 선정하여 부모와 함께 상담에 참여 가능한 10명은 실험집단에 나머지 연구에 동의한 10명은 통제집단에 배치하였다. 프로그램 전과 후에는 김미현(2009)의 학업스트레스 검사를 사용하였고, 수집된 자료는 혼합변량분석(Mixed ANOVA)을 사용하여 통계적 결과를 분석하였다. 그리고 양적 결과를 보다 타당하게 해석하기 위하여 집단원의 경험보고서와 상담자의 관찰내용을 분석하여 제시하였다. 그 결과 본 프로그램은 초등학교 고학년의 학업스트레스를 감소시키는데 긍정적인 영향을 준 것으로 나타났다. The purpose of this study is to develop a parents‐involved group counseling program for alleviating academic stress of elementary school students in higher grades and to test the developed counseling program in order to verify its effects on academic stress. This Group Counseling Program is researched, analyzed, designed, developed and applied. First, it surveyed 190 elementary school students in higher grades for actual requirement. Second, it analyzed the number of program session, session’s goal, session sequence. Third, it designed program contents and activities by pooling and warehousing. Forth, it developed final program by pilot test and experts of advice. Fifth, to verify the effectiveness of the developed counseling program.a sample of grade 5 students at W elementary school in Cheongju City was selected to test an academic stress level. Students with a score higher than M+1SD became the subject of the counseling program, which included ten students for an experimental group and another ten students for a control group: the ten students in the experimental group participated in the counseling program with their parents, and the other ten students in the control group consented to take the counseling program on their own. Mihyun Kim’s (2009) academic stress test was used as a tool for this sampling test, and the collected statistical data was analyzed by Mixed ANOVA from SPSS/Window 12. Furthermore, from the experimental group, both experience reports and counselor observation contents were analyzed in order to improve the reliability of the quantitative results. The results from this research are as follows. The counseling program showed a positive reduction of academic stress of elementary school students in senior year grades.

다산부에서 자간전증의 임상적 고찰

이주롱,이석민,한효상,이해혁,이임순,이권해 순천향의학연구소 2001 Journal of Soonchunhyang Medical Science Vol.7 No.2

목적 : 전자간증 산모에서 초임신부와 다산부 각각의 임상적 특징을 조사하여 비교 분석하고자 하였다. 연구방법 : 1998년 1월부터 1999년 12월까지 2년간 순천향대학 서울병원에서 입원 분만한 임신성 고혈압성 질환 환자중 초임신부 106명과 다산부 50명, 총 150명을 대상으로 임상통계학적으로 조사 분석하였다. 결과 : 분만까지 임신기간의 비교시 초임신부에서는 33-36주에서 17.9%였고 다산부에서는 34.0%로, 다산부에서 조기분만의 예가 의의있게 많았다. 신생아 체중이 2500g 미만인 군이 초임신부군에서는 36.8%였고 다산부군에서는 62.0%로 다산부군에서 더 많았다. 임신성 고혈압성 질환의 중등도를 보면 중증자간전증의 초임신부에서 35.8%와 다산부에서는 44.0%로, 초임신부에 비해 다산부군의 중증 자간전증의 비율이 많았다. 결론 : 중증 임신성 고혈압성 질환이 다산부군에서 더 많았으며 적은 주수에서 제왕절개술을 시행해 출생아의 체중이 초임신부군에 비해 더 작았고 Apgar 점수도 더 낮았다. Objective : To study the clinical differences of primiparous and multiparous preeclamptic patients. Methods : We statistically analyzed 106 primiparous and 50 multiparous preeclamptic patients who were admitted to the Soonchunhyang University Hospital from January 1998 to December 1999. Results : It was statistically found that multiparae were more likely to give premature birth than primiparae: Thirty four percents of multiparae gave birth in the period between the 33rd and the 36th gestational weeks while 17.9% of primiparae did in the same period. Sixty two percents of the newborn babies of multiparae weighed less than 2500g. Among primiparae, the ratio was 36.8%. In addition, more multiparae(44.0% vs. 35.8%) suffered from severe preeclampsia. Conclusion : severe preeclampsia was found more frequently among multiparae. Since they gave birth earlier by cesarian section than primiparae, their babies weighed less and had lower apgar scores.

임신 종결 후 발생한 자궁 동정맥 누공에서 자궁동맥색전술로 치료한 1예

김종민,이해혁,김태희,남계현,심일구,이권해,김형문,이임순,장종호 순천향의학연구소 2004 Journal of Soonchunhyang Medical Science Vol.10 No.2

Arteriovenous fistula of uterus is rarely reported disease. This vascular malformation is very dangerous condition because Dilatation & curettage can cause massive uterine bleeding without accurate diagnosis. The diagnosis is made by angiography, gray scale ultrasonography, color and duplex doppler ultrasonography, computed tomography, and magnetic resonance imaging is helpful. Especially color and duplex doppler ultrasonography is allows convincing detection and diagnosis of arteriovenous fistula. Recently transcatheter uterine artery embolization is treatment of choice. We have experienced a case of arteriovenous fistula of uterus. Which is presented with a brief review of literature.

수술실 오염도감소를 위한 수술실공조시스템에 대한 연구

김천숙,박은정,강규식,김지은,안기량,권진형,유시현,주영철,권순정 순천향의학연구소 2004 Journal of Soonchunhyang Medical Science Vol.10 No.1

Background: The OR(operating room) should provide an optimum environment that is safe for the patient and the working personnel. The air ventilation system of OR has been studied to decrease the contamination of air. We investigated the flow and contamination of the air in OR at our hospital. Method: Cultures in OR were made and the number of bacteria and fungi were calculated. A two-dimensional model for the cross-section of an operation room is developed for the CFD (computational fluid dynamics) analysis. The characteristics of air flow in the empty operation room and in the occupied operation room are calculated by using a CFD program. Results: The current air ventilation system of our hospital does not deliver the clean air to the operating site efficiently in occupied OR. Conclusions: We suggested a new location of air ventilation system which improves air venting with little increase of the cost of equipment.

Mechanical Behavior of Methyl-Silsesquioxane Based Nano Porous Low-K Film Using by Ultraviolet Curing Method

Kwon, Soon Hyeong,Choi, Eunmi,Kim, Areum,Kang, Keunwon,Nam, Minwoo,Zheng, Longshou,Pyo, Sung Gyu American Scientific Publishers 2016 Science Of Advanced Materials Vol.8 No.10

RF analysis in tantalum nitride thin film resistor

Soon Hyeong KWON,Eunmi CHOI,Areum KIM,Minwoo NAM,Keunwon KANG,Long Shou ZHENG,Ju Young YUN,Hoon HUH,Nak-Kwan CHUNG,Sung Gyu PYO 한국진공학회 2016 한국진공학회 학술발표회초록집 Vol.2016 No.8

Investigating Antioxidant Activity and Stilbenes and Flavonoids in Korean Wild Grapes Used as Genetic Resources for Grape Breeding

Soon Eun Kwon,Ju Hyeong Lee,Soon Young Ahn,Young Sik Park,Seong Jin Choi,Hae Keun Yun 한국원예학회 2018 한국원예학회 학술발표요지 Vol.2018 No.10

Chemical Analysis of Patterned Mask Cleaning in Organic Light Emitting Diode Fabrication with Raman Spectroscopy

Kwon, Soon Hyeong,Cui, Yinhua,Choi, Eunmi,Kim, Areum,Chae, Su Jin,Pyo, Sung Gyu Taylor Francis 2015 Applied spectroscopy reviews Vol.50 No.7

<P>Despite the continually improving efficiency of the fabrication process used to manufacture the organic light emitting diode (OLED) emitter layer, which uses a shadow mask, a method for the cleaning and recycling of the shadow mask is still lacking. One of the main reasons for this is the absence of a quantitative/qualitative method to analyze the cleaning solution using simple in situ measurements. Recently, Raman analysis has become popular because of its convenience, ease of use, and suitability for in situ measurements. Thus, Raman spectroscopy has the capacity to analyze the solution used for cleaning shadow masks. A particular advantage of this approach is that it can detect organic contaminants in the cleaning solution, which are caused by the residue that remains on the shadow mask after the OLED emitter layer fabrication process. Raman spectroscopy has an advantage for analyzing solution condition and contaminant detection between the cleaning solution and organic chemical by using the Raman peak and fluorescence integration method.</P>

부분보수한 RC보의 보수부 크기에 따른 응력 변화 검토

권형순 ( Kwon Hyeong-soon ),이상수 ( Lee Sang-soo ) 한국건축시공학회 2023 한국건축시공학회 학술발표대회 논문집 Vol.23 No.2

Reinforced concrete structures are an integrated structure in which reinforcing bars are placed on the tensile side of the beam to compensate for concrete that is strong in compression but weak in tension, so that the concrete receives compressive force and the reinforcing bars receive tensile force. It is durable, fire-resistant, economical, and adapts to the shape and dimensions of the structure. It has been widely used for a long time because it can be made freely without restrictions. However, reinforced concrete structures have the disadvantage that cracks occur easily, so they are repaired using a cross-sectional construction method. During this process, problems such as the repair part falling off occurred, so in order to solve the problem, stress changes due to changes in the size of the repair part were examined. As a result, based on the elastic modulus ratio of 1.0, the stress tended to increase as the size of the repair part decreased when it was less than 1.0, and the opposite tendency was seen when it was more than 1.0. This is believed to be due to an increase in the area of the part with a large elastic modulus.

토르마린을 혼입한 무시멘트 경화체의 강도 특성

권형순 ( Kwon Hyeong-soon ),이창우 ( Lee Chang-woo ),황우준 ( Hwang Woo-jun ),이상수 ( Lee Sang-soo ) 한국건축시공학회 2022 한국건축시공학회 학술발표대회 논문집 Vol.22 No.2

As global warming becomes serious, research is continuously being conducted to reduce CO2 emissions. Among building materials, the carbon emission of cement is so high that it accounts for 6.8% of the carbon emission of the entire industry. Studies replacement of cement with blast furnace slag and fly ash are steadily increasing. In addition, efforts are being made to reduce air pollution due to increased damage caused by increased concentrations of harmful substances such as fine dust and heavy metals in the air. There is an increasing number of studies that enable adsorption by mixing adsorbents into building materials. This study reviewed the strength properties to make an adsorbable non-cement finishing material by mixing tourmaline, an adsorbent, based on the non-cement composite, and confirmed that the strength decreases as the replacement ratio increases.