http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
황영기,방시욱 慶南大學校 附設 工業技術硏究所 1998 硏究論文集 Vol.15 No.3
Carmine-6B 아조염료 수용약을 양극산화시키는 전기분해반응에서 부반응이 없는 최소운전전압은 1.2V로, 산소발생에 따른 부가적인 산화작용을 고려한 최적운전전압은 20∼25V로 각각 조사되었다. 초기속도법으로 구한 분해반응치수는 0.68로 측정되었으며 반응속도는 전압상승에 따라 0.5승에 비례하였다. 물질전달계수는 pH에 무관하고 교반속도의 ⅓승에 비례 증가하였다. Decomposition of Carmine-6B azo dye has been performed by electrochemical oxidation. Minimum voltage for the reaction was found to be 1.2V. Oxygen evoluted on anode effected on the decomposition at the cell voltage as high as 20V or 25V. Initial reaction rate depended on both initial concentration with 0.68th order and cell voltage with 0.5th order. Mass transfer coefficient of azo dye was independent on pH of solution, but it was in proportion to its agitating speed by one third power .
음전하를 띤 Microsphere 에 의한 정전기적 반발력이 정밀여과에서 투과 플럭스에 미치는 영향 고찰
박정민,최성욱,방시원,함승주,김중현,김우식 한국화학공학회 2001 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.39 No.6
본 연구에서는 일정 압력하에서 음전하를 띤 microspheres의 정전기적 반발력에 따른 투과 플럭스의 변화에 관하여 고찰하였다. Microsphere의 정전기적 반발력에 관한 영향을 관찰하기 위해 표면전하 밀도(N_c: 0.45, 5.94, 10.25)가 각각 다른 poly(Styrene/Methacrylic acid) microspheres를 제조하였다. 교반속도는 300, 400, 600 rpm, 이온강도는 0.1, 0.01, 0.001로 변화시켜 실험하였다. 투과 플럭스는 표면전하밀도, 교반속도, 이온강도에 큰 영향을 받음을 알 수 있었으며, 투과 플럭스는 표면전하밀도가 클수록, 교반속도가 증가할수록, 이온강도가 작을수록 증가함을 알 수 있었다. 교반속도가 크면 막표면의 농도분극층의 두께가 얇아지기 때문에 투과 플럭스는 증가한다. 이온강도가 작을수록, 표면전하밀도(surface charge density)가 클수록 투과 플럭스가 커지는 원인은 microspheres의 정전기적 이중 층의 두께가 두꺼워짐에 따라 입자 사이의 거리가 멀어져 공극률(porosity)이 커지기 때문이다. 정상상태 플럭스 자료로부터 비 저항 정의식을 이용하여 케이크층의 공극률을 구할 수 있었다. 전하를 나타내지 않는 polystyrene microspheres의 입자크기가 480㎚일 때 농도분극 층의 이론적인 공극률은 0.211이었고, microspheres의 표면이 methacrylic acid로 완전히 개질된 것은 비 저항정의식에 의해 3.04로 계산되었다. 또한 microspheres들간의 정전기적 상호작용력이 작아지면 농도분극층의 공극률도 줄어드는 것을 알 수 있었다. The effect of the surface charge density(N_c: 0.45, 5.94, 9.14 and 10.25) and the stirrer speed(300, 400 and 600 rpm) on the variation of permeate flux was investigated in a stirred cell filled with negatively charged microspheres under constant pressure. It was found that the permeate flux depended on the surface charge density, the ionic strength and the stirrer speed. High permeate flux was obtained in the condition of high surface charge density, low ionic strength and high stirrer speed due to the force of electrostatic interaction between microspheres. The porosity of a cake layer was calculated from the steady-state flux data. It was found that the reduction of porosity was due to a decrease in repulsive interaction between microspheres.