http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
에틸, n-프로필 및 n-부틸알코올 플라즈마중합박막의 구성성분
서은덕,강영립 경남대학교 신소재연구소 1996 論文集 Vol.7 No.-
에틸알코올, n-프로필알코올, n-부틸알코올을 단량체로 사용하여 KBr 기질상에서 RF방전출력 25W, 방전압력 100, 140 및 200mTorr의 조건에서 플라즈마중합 하였다. 생성된 세가지 알코올-플라즈마중합박막의 구조와 성분은 적외선분광기와 ESCA를 이용하여 분석하였다. 박막은 -C-O-, -C=O 및 -O-C=O등과 같은 산소화합물을 포함하는 탄화수소로 나타났으며, 박막 내에 포함된 산소는 10-15% 정도였다. 뿐만 아니라 박막내에는 불포화 공액구조도 포함되어 있는 것으로 나타났다. Ethyl alcohol, n-Propyl alcohol, and n-Butyl alcohol were plasma polymerized on KBr substrate at RF discharge power of 25W and pressures of 100. 140. and 200mTorr. Structures and chemical compositions of three alcohol-plasma polymerized thin films were analyzed by means of IR and ESCA spectroscopy. The formed thin films appeared to contain oxygen- containing group such as -C-0-. -C=O, -0-C=O and contained about 10-15% amount of oxygen atom. Moreover, unsaturated groups were detected in the thin films.
PrOH 및 BrOH 플라즈마에 의한 필름 베이스의 표면개질
서은덕,강영립 慶南大學校 附設 基礎科學硏究所 1998 硏究論文集 Vol.12 No.-
The surface of polyethylene terephthalate film used to film base was modified by PrOH and BuOH plasma. The PrOH and BuOH plasma polymerized thin films was formed with similar composition of the oxygen functionalities such as ether and carbonyl group. It was tured out that the surface of modified polyethylene terephthalate film had surface polar groups. And these surface groups caused to decrease contact angles with water
n-부틸알코올 플라즈마로 처리된 폴리에스테르의 표면 특성
서은덕,강영림 慶南大學校 附設 工業技術硏究所 1997 硏究論文集 Vol.15 No.1
n-부틸알코올-플라즈마중합박막을 폴리에스테르 표면위에 생성시켜 표면의 특성을 개질 하였다. 폴리에스테르의 표면은 생성된 박막 내의 친수성기에 의해 친수성으로 개질되었으며 친수성의 정도는 박막내의 산소함량과 밀접한 관계가 있었다. 한편 박막은 발수 및 방오의 효과를 갖는 보호성 차단막으로서의 특성도 나타내었다. We have modified surface property of polyster by deposition of the n-butyl alcohol plasma polymerized thin film. The surface property of polyester was modified to hydrophilic and the hydrophylicity depended closely on the oxygen content of the thin films. The thin film has also protactive barrier property, water repellency, and stain proof property.
서은덕,강영립 慶南大學校 附設 基礎科學硏究所 1998 硏究論文集 Vol.12 No.-
The hydrophobic surface of fluorocarbon resin was modified to hydorphilic surface by deposition of propanol-plsama polymerized thin film. The water contact angle of modified surface of fluorocarbon resin was 62.7˚ While untreated surface was 119.9˚.
서은덕,강영립,최창규 경남대학교 신소재연구소 1992 論文集 Vol.2 No.-
폴리에스터(PET)의 표면성질을 친수성으로 개질하기 위하여 Perfluoropropene을 13.65MHz의 RF 발진기를 이용하여 PEF직물상에 플라즈마중합하였다. 이때 생성된 박막의 표면성질을 플라즈마 후반용(post reaction)과 불포화결합을 이용하여 친수성으로 개질하였다. 친수성의 개질 효과는 적외선분광스펙트럼에서 수신기의 생성과 불포로 개질하였다. 친수성의 개질 효과는 적외선분광스펙트럼에서 수산기의 생성과 불포화결합에 대한 Br₂의 첨가반응에 따른 이중결합의 소멸로서 확인할 수 있었고 친수화의 정도는 마찰대전압을 측정하여 평가하였다. For the modification of PET surface, Perfluoropropene was plasma polymerized on the PET fabrics by means of 13.56MHz radio frequency generator. The surface preperties of PET fabrics were modified from hydrophobic to hydrphilic by application of the post reaction and hydration reaction of unsaturated bonds present in plasma thin film. The evaluation of the degree of hydrophilicity was performed by measuring friction static voltage of PET fabric with cotton fabric.
서은덕,임학상,강영립 경남대학교 신소재연구소 1991 論文集 Vol.1 No.-
튜브형 반응기를 사용하여 방전출력 25W, 압력 140mtorr와 250mtorr에서 perfluoropropene을 철판을 기질로사용하여 플라즈마 중합하였다. 플라즈마중합체의 표면특성과 구조 분석을 위하여 ESCA, SEM 및 접촉각측정기가 사용되었으며 플라즈마중합에 의하여 기질표면은 소수성으로 변성되었다. 보호성 및 계면재료로서 플라즈마중합체의 보호성 차단성능을 60℃, 4% 염수용액에서 조사하였다. 플라즈마중합에 의해서 표면이 코팅된 시료는 코팅되지않은 시료에 비해서 월등한 내부식성을 나타내었고 140mtorr에서 중합된 박막이 250mtorr에서 중합된 박막보다 내부식성이 우수하였다. 이러한 현상은 플라즈마중합반응 변수에 따른 박막조성의 차이로서 설명 할 수 있었다. 내부식성에 대한 박막두께의 효과는 박막의 두께가 증가할수록 차단시간이 길어짐을 관찰하였다. Perfluoropropene was plasma polymerized on steel sustrate at pressure of 140mtorr and 250mtorr with r.f. discharge power of 25W in a tubular reactor. Polymer deposits were examined with ESCA, SEM and contact angle meter to analyze the surface properties and polymer structure. The surface of sustrate was modified to be hydrophobic by plasma thin film. The protective barrier performances of the plasma polymers as protective and interfacial materials were evaluated in 4% salt water at 60℃. Results of our studies showed that samples which were coated with plasma thin film was much better corrosion resistant than that of uncoated. For samples coated with thin films at 140mtorr and 250mtorr, the former was superior ot the latter in anticorrosive performance. This observation was attributed to the structural differences of the plasma polymers by different reaction parameter. The thickness effect of thin film was that as increasing thickness protecting period of thin film on substrate was extended in corrosive environment.