http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
방시원,김중현 한국공업화학회 2001 한국공업화학회 연구논문 초록집 Vol.2001 No.-
It was experimented that polystyrene and modified nanoparticles were used to investigate influences of charge density and particle size of vector on delivering DNA in target cells. The toxicities of modified nanoparticles were relatively low compared with that of the control. It was measured the amount of the adsorption DNA on nanoparticles. The amount of the adsorption pcDNA 3.1 using positive nanoparticles was nearly 3.5㎍ (in nanoparticle 10㎍), while that of polystyrene nanoparticles was about 1.1㎍. As the positive charge density of nanoparticles was higher, the amount of the adsorption gene was increased. It was tested for the efficiency of gene transfer in 293 cell using the nanoparticles loaded pcDNA 3.1, in vitro; It was showed the best efficiency at a 0.169/㎟ of surface positive charge of nanoparticles. These results were explained that nanoparticles modified with cationic monomers. It was showed the high-transfected effiency when the effective diameter of complex was about 200 to 250nm.
음전하를 띤 Microsphere 에 의한 정전기적 반발력이 정밀여과에서 투과 플럭스에 미치는 영향 고찰
박정민,최성욱,방시원,함승주,김중현,김우식 한국화학공학회 2001 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.39 No.6
본 연구에서는 일정 압력하에서 음전하를 띤 microspheres의 정전기적 반발력에 따른 투과 플럭스의 변화에 관하여 고찰하였다. Microsphere의 정전기적 반발력에 관한 영향을 관찰하기 위해 표면전하 밀도(N_c: 0.45, 5.94, 10.25)가 각각 다른 poly(Styrene/Methacrylic acid) microspheres를 제조하였다. 교반속도는 300, 400, 600 rpm, 이온강도는 0.1, 0.01, 0.001로 변화시켜 실험하였다. 투과 플럭스는 표면전하밀도, 교반속도, 이온강도에 큰 영향을 받음을 알 수 있었으며, 투과 플럭스는 표면전하밀도가 클수록, 교반속도가 증가할수록, 이온강도가 작을수록 증가함을 알 수 있었다. 교반속도가 크면 막표면의 농도분극층의 두께가 얇아지기 때문에 투과 플럭스는 증가한다. 이온강도가 작을수록, 표면전하밀도(surface charge density)가 클수록 투과 플럭스가 커지는 원인은 microspheres의 정전기적 이중 층의 두께가 두꺼워짐에 따라 입자 사이의 거리가 멀어져 공극률(porosity)이 커지기 때문이다. 정상상태 플럭스 자료로부터 비 저항 정의식을 이용하여 케이크층의 공극률을 구할 수 있었다. 전하를 나타내지 않는 polystyrene microspheres의 입자크기가 480㎚일 때 농도분극 층의 이론적인 공극률은 0.211이었고, microspheres의 표면이 methacrylic acid로 완전히 개질된 것은 비 저항정의식에 의해 3.04로 계산되었다. 또한 microspheres들간의 정전기적 상호작용력이 작아지면 농도분극층의 공극률도 줄어드는 것을 알 수 있었다. The effect of the surface charge density(N_c: 0.45, 5.94, 9.14 and 10.25) and the stirrer speed(300, 400 and 600 rpm) on the variation of permeate flux was investigated in a stirred cell filled with negatively charged microspheres under constant pressure. It was found that the permeate flux depended on the surface charge density, the ionic strength and the stirrer speed. High permeate flux was obtained in the condition of high surface charge density, low ionic strength and high stirrer speed due to the force of electrostatic interaction between microspheres. The porosity of a cake layer was calculated from the steady-state flux data. It was found that the reduction of porosity was due to a decrease in repulsive interaction between microspheres.