The Effect of Traditional Market Aid Program on Trust and Support of Marketeer

Yong‐,Ki Lee,Jung Suk Seo,Jae Jang Yang 한국유통과학회 2012 KODISA ICBE (International Conference on Business Vol.2012 No.-

步速變化에 따른 미끄러짐의 생체역학적 연구

서국웅,윤양진,서국은,이중숙,김용재,이언석,이훈식 釜山大學校 附設 體育科學硏究所 1992 體育科學硏究所 論文集 Vol.8 No.-

The purpose of this study was to analyze walking steps to prevent unnecessary energy consuming and prevention of injury from sliding when someone was walking. The questionnaire, high speed video system, E.M.G. system, and force platform system were used to analyze sliding mechanism in biomechanical perspective. Several results were found as following: 1. According to questionnaire regarding sliding, 93.3% of participants have sliding experiences. People have sliding experiences by greasy floor(48.4%) and obstacle (22.5%). Sliding types were found from different kinds of shoes such as sneakers (48.8%) and boots (34.2%). The results were presented as following 44.6% of participants were fall down front direction and 40.3% of people fell down rear side. 2. According to the high speed video system analyzer, step sliding increased with increasing step speed from distance and acceleration speed experiment with 80 steps/min, 100 steps/min, 120 steps/min. Also, the most sliding were occurred with sneakers, boots, and bare feet as order. 3. According to E.M.G. test results, the vastus lateralis M., the vastus medialis m., and the tibialis anterior m. of electric action potential presented strongly when participants fell front, rear, and right side. The vastus lateralis m. and the tibialis anterior m. of electric action potential presented strongly when someone fell left side, but the vastus medialis m. and the gastrocnemius m. of electirc action potential presented as weaker. 4. According to the force platform test results, the most big change of floor antipower of x-axis presented when someone fell the left side. The most of big change of floor antipower of y-axis presented when someone fell down rear side. The most of big change of floor antipower of z-axis presented similarly when someone fell the front, rear, left, and right side.

판상형 충전제의 함량과 배향에 따른 PP복합체의 영률 변화 연구

서상범(Sang Bum Seo),이용현(Yong Hyun Lee),정선경(Sun Kyoung Jeong),이승구(Seung Goo Lee),이기윤(Kee Yoon Lee) 한국고분자학회 2012 폴리머 Vol.36 No.2

이 논문은 판상형 충전제의 함량과 배향에 따라 폴리프로필렌 복합체의 영률 변화에 미치는 영향을 연구 하였다. 이론적인 예측은 Lee와 그의 연구자들에 의해 제안된 두 개의 종횡비, ρα=a1/a3과 ρβ=a1/a2 를 이용하여 3차원 타원체의 형상을 계산하였고 실험값과 비교 분석하였다. 판상형 충전제로 운모와 탈크를 사용하였다. 충전제의 형태는 SEM을 이용해 관찰하였고, 종횡비는 고분자의 흐름을 기준으로 좌표축을 설정하여 통계적 방법으로 계 산하였다. 충전제가 운모인 경우에 ρα=13.5와 ρβ=1.8이었고, 탈크의 경우는 ρα=3.8과 ρβ=1.4이었다. 또한 충전제 의 2개의 종횡비와 함량이 기계적 물성에 미치는 영향을 실험적으로 연구하였다. 운모의 경우 30 wt% 함량일 때 E11이 약 2.7배 향상되었다. 탈크의 경우는 E11이 약 2.3배 향상하였다. This paper studied the effects of the content and the orientation of the disk shape fillers on the modulus of PP composites. The experimental results were compared with the theoretical calculations which included the three dimensional ellipsoids and analyzed by two aspect ratios, ρα=a1/a3 and ρβ=a1/a2 proposed by Lee and his researchers. Mica and talc were used as disk shape fillers in the composites. The shapes of mica and talc were observed by SEM and aspect ratios were statistically calculated. For the case of mica, the average aspect ratios were ρα=13.5 and ρβ=1.8, and for the case of talc, they were ρα=3.8 and ρβ=1.4. Also, the effects of two aspect ratios and the content of filler on the mechanical properties were studied: For 30 wt% of mica, E11 increased up to about 2.7 times, and for the other case of talc, E11 increased up to about 2.3 times, respectively.

Selenium 공급방법이 수경재배 토마토의 생장과 Se 흡수에 미치는 영향

이철규(Cheol-Kyu Lee),조경철(Kyung-Cheol Cho),이정현(Jeong-Hyun Lee),조자용(Ja-Yong Cho),서범석(Beom-Seok Seo),양원모(Won-Mo Yang) (사)한국생물환경조절학회 2005 생물환경조절학회지 Vol.14 No.4

토마토 ‘모모타로’를 공시하여 셀레늄 10㎎ㆍL?¹의 관주 및 엽면시비 등의 단용 및 혼용처리가 수경재배 토마토의 생육 및 과실 내 셀레늄 축적 함량에 미치는 영향을 구명하였다. 토마토 종자를 50공 트레이에 파종하여 70일 동안 육묘한 후 유묘를 코코피트 슬라이브를 이용한 수경재배 시스템에 정식하였다. 양액은 일본원예시험장 배양액 표준처방으로 조성하였으며, pH 5.8~6.2와 EC 2.3 ㎎ㆍL?¹ 등으로 조절하여 공급하였다. 셀레늄은 무기태 SeO₂와 sugar fatty acid ester에 킬레이트화 한 유기태 셀레늄을 10 ㎎ㆍL?¹으로 조성하여 관주, 엽면시비, 관주와 엽면시비를 병행하여 처리하였다. 초장, 엽수, 엽면적 및 엽록소 등의 토마토 생장반응은 셀레늄의 엽면시비, 그리고 엽면시비와 관주를 병행한 처리구에서 현저히 증가하였다. 과실 내 셀레늄 축적 함량은 킬레이트화 한 유기태 셀레늄을 엽면시비와 관주를 병행하여 처리한 경우에 0.302 ㎎ㆍL?¹으로 가장 높았다. 무기태와 유기태 셀레늄의 엽면시비와 관주 등의 단용 처리 보다는 혼용 처리가 전반적인 과실 생장과 체내 셀레늄 축적에 효과적이었다. 무기태 설레늄(SeO₂) 보다는 sugar fatty acid ester에 킬레이트화한 유기태 셀레늄 처리가 셀레늄을 함유한 기능성 토마토의 수경재배에 더 효과적이었다. This study was conducted to clarify the effects of supplying methods of selenium on the growth and Se uptake of hydroponically grown tomato plants. Tomato seeds (Lycopersicum esculentum Mill. cv. Momotaro T-93, Daki Seed Co.) were sown in plug tray with fifty holes, and raised for sixty days. Tomato seedlings transplanted to coco fiber slabs were supplied with the nutrient solutions adjusted to EC 2.3 dSㆍm?¹ and pH 5.8~6.2 recommended by the Japanese Horticultural Experiment Station. Selenium forms used were inorganic SeO₂ (here in after referred to Se) and organic selenium chelated with sugar fatty acid ester (here in after referred to chelated-Se). 10 ppm selenium solutions were treated to tomato plants with foliar applications, drenching, and foliar application plus drenching. Growth characteristics in terms of plant height, number of leaves, leaf area and chlorophyll content were significantly increased in the plot of foliar application of Se, and in the plot of foliar application plus drenching of chelated-Se than other plots, respectively. Transported contents of selenium into the tomato fruits were highest as 0.302 ppm in the plot of foliar application plus drenching of chelated-Se. Also, it had tended to be higher in the plot of foliar application plus drenching than in the plots of foliar application or drenching in both of Se and chelated-Se. Foliar application and drenching of organic chelated-Se were effective to produce the functional tomato fruits.

부울함수의 논리곱의 배타적 합 논리로의 간략화

이상곤,이진흥,서용수 東西大學校 1998 동서논문집 Vol.4 No.-

In this paper, a Boolean function minimization algorithm in the form of exclusive-or sum of products(ESOP) is proposed Since Boolean furctions expressed as the ESOP are convenient to determine the structural equivalence among functions, they may be used in developing Boolean functions for hash function.

EMTP MODELS를 사용한 거리계전기법 구현에 관한 연구

이명희,최해술,서용필,김철환 成均館大學校 科學技術硏究所 1995 論文集 Vol.46 No.2

This paper presents a new distance relay modeling techniques which avoids unnecessary computational procedure. A general-purpose simulation language, called MODELS, has been added to the software ATP(Alternative Transients Program) providing a new option to perform numerical and logical manipulations of variables of an electrical system. This language has been designed to replace the previous option TACS(Transient Analysis of Control Systems) which permits to simulate a control system in conjunction with a large power network. One purpose of this study is to build a structure for modeling of digital distance relays within EMTP MODELS. Contrary to the traditional methods, the new method using MODELS reduce the number of simulation steps in modeling the distance relay.

수중 가청음에 의한 쏨벵이의 청각능력 : 2. 청각 임계비

이창헌,박용석,문종욱,강창익,김고환,서두옥 제주대학교 해양연구소 1999 해양자원연구소연구보고 Vol.23 No.-

수중 가청음은 어군의 행동 제어와 해양목장화에서 음향 순치에 많이 이용되고 있다. 수중 가청음에 의한 어류반응 해석을 하기 위해서는 물고기의 청각능력을 정확히 파악할 필요가 있으며,오래전부터 여러물고기의 청각능력을 관련된 연구가 수행되었다.

수면확성기의 음향특성에 관한 연구

이창헌,문종욱,박용석,최찬문,서두옥 제주대학교 해양연구소 1998 해양자원연구소연구보고 Vol.22 No.-

To obtain the fundamental data on a surface speaker made to lure fish school by pure sound, three surface speakers were made of moving coil driver units of 75W and 50W respectively. Their frequency characteristic was measured in the range of 200 - 4mHz that could be used in luring fish school. The results of the measurements in air and sea are follows. 1. The input and output wave forms of a surface speaker were similar to each other in measurement frequencies in air. Then sound pressure of a surface speaker made of 75W driver units among them was over 130dB(0dB re 20μ Pa) in the range of 300 - 400Hz maximally. 2. When the surface speaker with 75W driver units emitted the measurement frequencies at sea. Sound pressure classified by the depth of water were over 140dB at 1m and 120dB at 20m(0dB re 1μ Pa) respectively.

가청수중음에 의한 넙치의 행동에 관한 기초적 연구 : 1.육상수조 양식장내의 환경소음

이유철,이창헌,최찬문,박용석,서두옥 제주대학교 해양연구소 1997 해양자원연구소연구보고 Vol.21 No.-

A fundamental experiment was carried out to confirm the behaviour of Bastard halibut Paralichthys olivaceus to audible underwater sound in a breeding ground around the coast of Cheju Island. To find characteristics of breeding water tank and experiment water tank. ambient noise, undcrwater noise and feeding sound of fish were measured and analyzied respectively. The results of measurement are as follows: 1. The maximum sound pressure level of ambient noise in breeding water tank was 81dB. average maximum sound level of underwater noise was 81dB at 120Hz. 2. The maximum sound pressure level of ambient noise in experiment water tank was 76dB and underwater noise was 84.2dB at 130Hz. 3. The maximum sound pressure level of feeding sound was 85dB at 120Hz.

신발유형별 보행동작의 운동역학적 동작분석

서국웅,윤양진,김용재,이훈식,유경복 부산대학교 사범대학 1995 교사교육연구 Vol.30 No.-

The purpose of this study was to prepare some useful data for the prevention of injury caused by shoes when female was walking. Kinematic variables were analyzed with the aid of the visual materials filmed with a 16mm high speed camera, such as angular changes of joints, displacement, velocity, and momentum of the center of body gravity. The subjects for the research were normal 4 female high school students: The analytic results of the mechanism of each locomotion pattern were as follows: 1. It is desirable Kinematically that the dispersion of power should not be caused in the movement of lower-legs by keeping natural flexion and extension of joint. 2. Too much vertical displacement of the center of body gravity was thought undesirable because it caused the dispersion of power against the moving direction. To get some propulsion in the moving direction, it was efficient to use as much energy as possible from 8 F-F support phase to the toe-off. And also the center of body gravity was moved by the inertia just after toe-off. 3. The correct walking motion occurred when the walker moved their hip joint or knee joint gently with their upper body upright and their eyes looking around. 4. In order to lengthen the stride it was essential to practice intensively the flexion of the hip joint, extension of knee and plantar flexion of ankle joint. 5. It was proved that in race walking, they could get much greater propulsion from the flexion of the ankle joint than from the hip joint or the knee joint. It was, therefore, very important to train walkers so that the initial planter flexion of the ankle joint might occur from 6 F-F of the supporting phase. 6. The flexion of the ankle joint produced the added propulsion in the moving direction but the excessive flexion increased energy consumption and caused strain on the ankle joint because it dispersed power in moving the center of body gravity. 7. It was desirable to narrow the ankle of the flexion of the hip and knee joints because it could speed up revolutions per minute of the lower limb through lessening the inertia of the revolutions. The angle made by knee joint was desirable for getting the greatest propulsion in the moving direction. 8. High heel was lower than barefoot or jogging shoes in the displacement of the center of body gravity. This result showed that the displacement of the center of body gravity was made safe by lowering the flexion and extension of knee joint.