태연혈(太淵穴)의 유침 시간에 따른 체온 변화 -적외선체열촬영(赤外線體熱撮影)을 중심으로-

이봉효 ( Bong Hyo Lee ),이경민 ( Kyung Min Lee ),박지하 ( Ji Ha Park ),김민서 ( Min Seo Kim ),김산들 ( San Deul Kim ),박병규 ( Byeong Gyu Park ),양현동 ( Hyun Dong Yang ),예성호 ( Sung Ho Yea ),이호정 ( Ho Jung Lee ),최재원 ( Jae 경락경혈학회 2012 Korean Journal of Acupuncture Vol.29 No.2

Objectives: This study was performed to find the desirable remaining time of needle in the acupuncture treatment. Methods: The 21 volunteers were given acupuncture at LU9 vertically and needles were remained for 2 min, 10 min, 15 min, 30 min, respectively. The thermographic change induced by acupuncture was measured with Digital Infrared Thermographic Image at the following acupoints: LU11, LU10, LU9, LU8, LU5, LU1, and PC7. The statistical significance of thermographi change was evaluated using paired t-test and post hoc Wilcoxon test. Results: The most significant changes after acupuncture were produced when needles were remained for 10 min or 15 min. LU11, LU5, LU1, and PC7 were the point at which all of the remaining time produced significant change commonly. At LU11, the biggest change was produced when needle was remained for 15 min, while at LU5, LU1, and PC7, the biggest change was produced when needle was remained for 30 min, and the smallest change was produced when needle was remained for 10 min at all of acupoints of LU11, LU5, LU1, and PC7. The unbalance between left side and right was decreased the most largely in 15 min group. Conclusions: The results of this study suggest that the desirable remaining time of acupuncture needle might be 15 min.

Preparation and Evaluation of Gelatin - Acacia Microcapsules of Sulfamethoxazole

Lee, Min Hwa,Yoo, Bong Gyu 한국약제학회 1982 Journal of Pharmaceutical Investigation Vol.12 No.4

Sulfamethoxazole particles were microencapsulated using the gelatin-acacia complex coacervation method. Micromeritic properties and dissolution characteristics of the microcapsules were studied. The particle size distribution followed log-normal form. As the hardening time increased, the particle size and wall thickness increased (45.3-52.0 ㎛, 2.02-5.12 ㎛, respectively). This is considered to be due to the cross-linked wall structure of formalized microcapsules which prevents shrinking of gelatin during the dehydration and drying processes. An increase of hardening time clearly delayed the release rate. The in vitro 50% dissolution time (t_(50)) for unencapsulated sulfamethoxazole powder was less than 3 min. ; for microcapsules hardened for 30 min, the t_(50) was 20.1 min. ; for those hardened for 60 min. the t_(50) was 25.0 min. ; for those hardened for 120 min., the t_(50) was 35.8 min. The surface of the unhardened microcapsules was smooth and had no cracking or pore penetration. However, the surface of the hardened microcapsules was folded and invaginated.

정상 관동맥을 가진 심장 점액종 환자에서 발생한 급성 심근 경색증 1예

이정민,이현승,전은정,윤호중,정욱성,오용석,김철민,김재형,최규보,홍순조,이교영,심상인 대한순환기학회 1998 Korean Circulation Journal Vol.28 No.9

BCR-ABL 융합유전자를 동반한 급성 골수구성 백혈병 1예

최정민,송성은,이규진,이규원,이호섭 고신대학교 의과대학 2009 고신대학교 의과대학 학술지 Vol.24 No.1

BCR-ABL 융합 유전자를 동반한 급성골수구성백혈병은 그 빈도가 매우 낮고, 만성골수구성백혈병의 급성악화기와 임상적으로 유사한 특징을 가진다. 항암화학요법으로 관해유도가 되기 어렵거나, 관해유도 후 재발의 빈도가 높은 특징을 가지고 있어 예후가 나쁘다고 알려져있다. 저자들은 BCR-ABL 융합 유전자를 동반한 급성골 수구성백혈병1례를 경험하였기에 문헌고찰과 함께 보고 하는 바이다. BCR-ABL fusion gene is the hallmark of chronic myelogenous leukemia (CML), but it has been rarely reported in acute myeloid leukemia (AML). AML with BCR-ABL fusion gene has different features from blast crisis of CML. We experienced a rare case of AML with BCR-ABL fusion gene. Here we report this case with a brief review of literatures.

치매환자를 위한 어플리케이션에 대한 연구

이철민(Lee Chul?min),임병규(Lim Boung-gyu),송은지(Song Eun-jee) 한국정보기술학회 2018 Proceedings of KIIT Conference Vol.2018 No.11

Polysulfone에 Di-(2-ethylhexyl)-phosphoric acid와 Carbon Nanotubes를 고정화한 PSf/D2EHPA/CNTs 비드의 제조와 Sr(II)의 제거 특성

이민규 ( Min-gyu Lee ),윤종원 ( Jong-won Yun ),서정호 ( Jung-ho Suh ) 한국화학공학회 2017 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.55 No.6

본 연구에서는 di-(2-ethylhexyl)-phosphoric acid (D2EHPA)와 carbon nanotubes (CNTs)를 polysulfone (PSf)에 고정화시켜 PSf/D2EHPA/CNTs 비드를 제조하였으며, 제조한 비드에 의한 Sr(II)의 제거특성을 살펴보았다. Scanning electron microscopy (SEM), Fourier transform infrared spectrometer (FTIR) 및 Thermo gravimetric analysis (TGA) 분석을 통하여 PSf/D2EHPA/CNTs 비드의 형태적 특성들을 조사하였다. PSf/D2EHPA/CNTs 비드에 의한 Sr(II)의 제거는 운전시간 60 min 정도에서 평형에 도달하였으며, 속도 실험결과는 유사 2차 속도식에 잘 부합하는 것으로 나타났다. 또한 PSf/D2EHPA/CNTs 비드에 의한 Sr(II)의 제거에서 Langmuir 식으로부터 구한 최대 제거량은 4.75 mg/g이었다. PSf/D2EHPA/CNTs 비드에 의한 Sr(II)의 제거효율은 추출제 D2EHPA 만을 사용하는 경우보다 CNTs를 첨가함으로써 Sr(II)의 제거량이 2.5배 정도 향상되는 결과를 보였다. PSf/D2EHPA/CNTs beads were prepared by immobilizing extractant di-(2-ethylhexyl)- phosphoric acid (D2EHPA) and adsorbent carbon nanotubes (CNTs) on polysulfone (PSf), and the adsorption characteristics of Sr(II) on the beads were studied. The morphological characteristics of the prepared PSf/D2EHPA/CNTs beads were observed by scanning electron microscopy (SEM), thermo gravimetric analysis (TGA), and Fourier transform infrared spectrometer (FTIR). The equilibrium time for the removal of Sr(II) by PSf/D2EHPA/CNTs beads was 60 min. The experimental kinetic data followed pseudo-second-order model more than pseudo-first-order kinetics model. The maximum removal capacity of Sr(II) obtained from Langmuir isotherm was 4.75 mg/g. The removal efficiencies of Sr (II) by PSf/D2EHPA/CNTs beads were improved 2.5 times by adding the adsorbent CNTs more than by using only the extractant D2EHPA.

열처리 방법에 따른 표고버섯의 이화학적 특성 및 영양학적 분석

이중규(Jung-Gyu Lee),김광일(Kwang-Il Kim),황인국(In-Guk Hwang),유선미(Seon-Mi Yoo),민상기(Sang-Gi Min),최미정(Mi-Jung Choi) 한국식품영양과학회 2015 한국식품영양과학회지 Vol.44 No.6

본 연구는 열수 침지, 증기 및 볶음 처리가 표고버섯에 미치는 이화학적 분석 및 영양성분 분석을 통해 최적 열처리 조건을 확립하고자 진행하였다. 소비자들이 상품을 평가할 때 1차적으로 먼저 관찰되는 색도와 경도를 측정하고 추가로 pH 측정 등으로 인한 이화학적 결과로 최적 조건을 선정한 뒤에 그 조건들에 대해서 영양학적 및 미생물 검사를 실시하였다. 색도는 열처리 시간이 길어질수록 색의 변색 정도가 증가하여 뚜렷한 차이를 나타내었다. pH 값은 열수 침지 처리의 경우 pH 증가량이 가장 높았으며 처리 시간이 지속될수록 pH가 증가하는 경향을 나타내었다. 다른 처리군의 경우 일정 시간의 처리 시간 이후에는 유의적인 차이를 보이지 않았다. 경도에서는 열수 침지와 볶음 처리의 경우 1분 이내의 열처리만으로도 경도가 감소하는 경향을 보였으며, 증기처리의 경우 1분 동안 경도가 유지되는 결과를 보였다. 일반성분 분석 결과는 증기 처리가 가장 원물에 가까운 결과를 나타냈다. 유기산 함량은 증기 처리에서 유기산 함량 감소율이 가장 낮았다. 또한 3분간 증기 처리를 하였을 때 미생물의 사멸 효과가 가장 높았다. 열수 침지 처리나 볶음 처리의 경우 전체적으로 증기 처리한 시료에 비해서 영양성분 함량이 줄어드는 경향을 나타냈다. 따라서 표고버섯을 증기 처리방법으로 열처리하는 것이 다른 열처리군에 비해서 최적으로 나타났다. 하지만 본 연구에서는 물리화학 및 영양학적 성분의 변화만을 분석하였기 때문에 실제 식품 산업이나 공정에 적용하기 위해서는 대용량 처리 시에 발생하는 문제들과 관련된 추가적인 연구를 필요로 할 것이다. In the food industry, thermal treatment is an important process for extending shelf-life of foods. However, heating process affects the physicochemical, nutritional, and microbial properties of foodstuff such as color, texture, pH, and proximate compositions. This study was conducted to select an optimal thermal treatment by observing physicochemical, nutritional, and microbial effects of shiitake mushrooms with different thermal treatment methods. Shiitake mushrooms were washed and sliced equally (5 cm×0.5 cm×0.5 cm) and then heat-treated by three methods. Samples were heated in 100°C boiling water, steamed for 10 min, or pan fried at 130°C for 4 min. Total color difference values showed significantly increasing tendency with treatment time. For pH values, boiling water-treated mushrooms showed increasing tendency according to increased thermal treatment. For the results of hardness, boiling water or pan frying-treated mushrooms showed reduced tendency within 1 min. In the case of steam-treated mushrooms, hardness values were maintained for 1 min. Organic acid contents of steam-treated sample showed the lowest value among treatments. For microbial counts, steam-treated samples for 3 min showed the lowest value. Consequently, the results of this study suggest that steam treatment could be the optimal thermal treatment to minimize quality loss of shiitake mushrooms.

위절제술 환자의 표준진료지침 개발 및 적용 효과

김은희,김철규,이순교,김순덕,이혜옥,권정순,이경미,이민미,심순미,유용만,신종식,강은희,이상일,김병식,오성태,육정환,박수길 한국의료QA학회 2003 한국의료질향상학회지 Vol.10 No.2

Background : Gastric cancer is the most common malignant tumor in Korea. surgical operation is one of the major treatment modalities for gastric cancer patients. Therefore, gastrectomy is one of the most common procedures in General Surgery. There were variation in length of hospital stay and medical treatment for gastrectomy between three surgeons at Asan Medical Center. Clinical pathways have received considerable attention as a tool for recucing the medical practice variation, increasing the efficiency of care process, and improving the quality of care. The aim of this study was to evaluate the effect of a clinical pathway for gastrectomy in gastric cancer patients. Methods : The clinical pathway for gastrectomy was developed and implemented by a multidisciplinary group in Asan Medical Center. A computerized clinical pathway program was developed and revised after a pilot test. A total of 145 patients underwent gastrectomy by three surgeons at Asan Medical Center. We compared the length of hospital stay, patient satisfaction, and unplanned readmission rate between the pre-pathway group(n=67) and the post-pathway group(n=78). We also investigated the degree of satisfaction among the physicians and nurses who were main end-users of the clinical pathway. Results : The clinical pathway was applied to all target patients. The average length of hospital stay was shortened from 12.7days to 10.6days(p<0.01). The degree of patient satisfaction with the care process changed from 90.3% to 89.2% after the implementation of the clinical pathway, but the difference was of satistically significant(p=0.761). Unplanned readmission rate was 2.9% in the pre-pathway group. More than 90% of physicians and nurses answered that the clinical pathway had been a useful tool in their medical practice. Conclusions : The findings of the study demonstrated that implementation of the clinical pathway for gastrectomy produced substantial reduction in the length of hospital stay while improving the quality of patient outcomes. The computerized clinical pathway program can be used as one of the powerful patient management tools for reducing the practice variations and increasing the efficiency of care process in Korea hospital settings.

석탄비산재로 합성한 Na-A 제올라이트의 Ca²⁺와 Mg²⁺ 이온교환 성능평가

이창한 ( Chang-han Lee ),이민규 ( Min-gyu Lee ) 한국환경과학회 2018 한국환경과학회지 Vol.27 No.11

In this study, zeolite (Z-C1) was synthesized using a fusion/hydrothermal method from coal fly ash. The morphological structures of Z-C1 were confirmed to be highly crystalline with a cubic crystal structure. Exchange capacities of Ca²⁺ and Mg²⁺ ions in a single and a mixed solution reached equilibrium within 120 min. The exchange kinetics of these ions were well predicted by the pseudo-second-order rate equation. The exchange isotherms of the Ca²⁺ and Mg²⁺ ions matched the Langmuir isotherm better than the Freundlich isotherm. The maximum cation exchange capacities (q_m) obtained by the Langmuir isotherm model were 2.11 mmol/g (84.52 mg/L) and 1.13 mmol/g (27.39 mg/L) for the Ca²⁺ and Mg²⁺ ions, respectively.

제올라이트를 PVA로 고정화한 흡착제에 의한 Cs과 Sr 이온 제거

이창한(Chang Han Lee),이민규(Min Gyu Lee) 大韓環境工學會 2015 대한환경공학회지 Vol.37 No.8

본 연구에서는 제올라이트를 PVA에 고정화시켜 새로운 흡착제인 PVA-Zeolite 비드를 제조하고, XRD 및 SEM 분석을 통해 제조한 PVA-Zeolite 비드는 내부에 제올라이트가 잘 고정화된 다공성 구조를 가지고 있는 것을 확인할 수 있었다. 제조한 흡착제에 의한 Cs 이온과 Sr 이온에 대한 흡착특성을 살펴보기 위하여 pH의 영향, 흡착속도, 흡착등온을 검토하였다. Sr 및 Cs 이온에 대한 평형흡착시간은 약 540 min으로 나타났으며, 흡착속도는 유사 1차 속도식 보다는 유사 2차 속도식에 더 잘 부합하였다. 흡착평형 실험결과는 Langmuir 등온식에 잘 적용되었으며, Langmuir 등온식으로부터 구한 Sr 이온과 Cs이온의 최대 흡착량은 각각 52.08 mg/g와 58.14 mg/g이었다. PVA-Zeolite 비드에 의한 Sr 이온과 Cs 이온의 흡착공정은 외부물질전달단계는 매우 빠르게 이루어지며, 내부입자확산에 의한 흡착반응은 느리게 진행되어 내부입자확산 단계가 흡착속도 결정단계인 것으로 판단된다. In this research a adsorbent, PVA-Zeolite bead, was prepared by immobilizing zeolite with PVA. The results of XRD and SEM analysis showed that the prepared PVA-Zeolite beads had porous structure and the zeolite particles were in mobilized within the internal matrix of the beads. The adsorption properties of Sr ion and Cs ion with the adsorbent were studied by different parameters such as effect of pH, adsorption rate, and adsorption isotherm. The adsorption of Sr ion and Cs ion reached equilibrium after 540 minutes. The adsorption kinetics of both ions by the PVA-Zeolite beads were fitted well by the pseudo-second-order model more than pseudo-first-order model. The equilibrium data fitted well with Langmuir isotherm model. The maximum adsorption capacities of Sr ion and Cs ion calculated from Langmuir isotherm model were 52.08 mg/g and 58.14 mg/g, respectively. The external mass transfer step was very fast compared to the intra-particle diffusion step in the adsorption process of Cs ion and Srion by the PVA-Zeolite beads. This result implied that the rate controlling step was the intra-particle diffusion step.