CONTROL OF BLISTER RUST OF TAIWAN RED PINE IN TAIWAN

Peng,Lin Feng,Chung Yi Tsai,Zuei Ching Chen 한국산림과학회 1985 한국산림과학회지 Vol.71 No.1

In 1966, the outbreak of a rust disease was discovered from the young plantation of Taiwan red pine (Pines taiwanensis Hay.) at the northeastern part of Taiwan Island. The plantation of about 2,000㏊ planted with 3-4 years old saplings is located on the mountain slopes of a valley of the upper stream of Ta-Chia River. The rust disease was first discovered sporadically from the narrow margin of plantation surrounding the pine nursery which was located at the center of valley. The disease spread rapidly and the total infected area in 1968 had been recorded for 186 ha. The rust fungus was first identified as Cronartium ribicola J.C. Fischer. The alternative hosts of this rust fungus, Ribes spp. were not recovered from the area of infectian sites nor from the area of 20Km radius from the infected site. Instead of Ribes host, Paeonia suffruticosa Andr. were planted in the nursery near by the pine nursery from 1966. It was thus identified the rust fungus as Cronartium flaccidum (Alb. et Schw.) Wint. The extensive control measures were practiced from 1968 and the eradication of infected saplings, shrubs and weeds of forest floors was given the first priority. In total, 111,852 trees infected were felled down from 1966 to 1971. All infected branches or parts of the trees were first wrapped with the vinyl film to prevent the dispersion of rust spores and then trees were felled down and finally were burnt at the site. Rest of pine trees of the whole plantation were sprayed with the fungicides; 0.2% Dithane Z-78 or 4-4 Bordeux mixture with addition of 1% Uspulun. Spraying of fungicides was carried out at least twice a month and continued to 1971. In 1973 and 1974, reforestation by some resistance tree species such as Pines armandi Fr., Taiwania, Cryptomeria, or Chamaecyparis, etc, were practiced. In total, 148,500 seedlings of tree species mentioned above were replaced the infected pine trees. Since the first outbreak of the disease in 1966, 20 years have been passed without any new outbreak of the rust disease by C. flaccidum in the same site or any other plantations in Taiwan. The control of the rust disease erupted in Taiwan red pine plantation in 1966 in thus concluded as very successful.

Polyester/Polylactic Acid/Stainless Steel Composite Bone Scaffolds Made by Electrochemical Treatment: Process Design and Property Evaluations

Mei-Chen Lin,Ching-Wen Lou,Jan-Yi Lin,Ting An Lin,Shih-Peng Wen,Jia-Horng Lin 한국섬유공학회 2019 Fibers and polymers Vol.20 No.2

This study combines and twists 75D polyester (PET) multi-filaments and polylactic acid (PLA) multi-filaments with twist coefficients of 2, 3, 4, 5, and 6 to form 150D PET/PLA plied yarns. The 0.08-mm-diameter stainless steel (SS) fibers are made into SS braids with a 60-tooth braid gear and a take-up gear with 60, 70, 80, 90, or 100 teeth. PET/PLA plied yarn and SS braids are then combined and electrochemically treated with an electric current of 100, 200, 300, 400, or 500 mA at 60 ℃ for 24 hours, forming the PET/PLA/SS composite bone scaffolds. PET/PLA/SS composite bone scaffolds are observed by scanning electron microscope (SEM) and energy dispersive spectroscope (EDS), and tested for weight increase rate and biocompatibility. The experiment results show that the optimal twist coefficient for PET/PLA plied yarn is 4 and the optimal tooth number on the take-up gear for SS braids is 80. SEM observation result shows that hydroxyapatite (HA) deposits on the surface of PET/PLA/SS composite bone scaffolds and attaches to the PET/PLA plied yarns. Finally, regardless of electric currents, all PET/PLA/SS composite bone scaffolds possess good biocompatibility.

Native versus non-native English teachers’ influence on English language learning motivation and anxiety

Peng, Lin,강상구 범태평양 응용언어학회 2022 범태평양응용언어학회지 Vol.26 No.1

This article mainly focuses on comparing motivation and anxiety levels in native versus non-native English teacher classes based on survey results from Chinese university students majoring in English. Using a 5-point Likert Scale, the participants responded to 48 close-ended survey items regarding English language learning motivation and anxiety. The overall results indicated that they tended to have high motivation level and low anxiety level in their English classrooms, but several survey items suggested that they were significantly more motivated and less anxious in native teacher classes than non-native teacher classes, which led to higher achievement levels in native teacher classes. Although the result seems to suggest that students prefer native English teachers, this does not imply that non-native teachers are not as qualified as their counterparts, as some survey items indicate that both teachers are equally prepared for classes and accessible for assistance. Based on the survey results, this paper makes some suggestions on how English teachers can better help their students’ English learning.

Effect of line and floor type on growth performance and feather characterization during the growth period of White Roman geese

Lin Min Jung,Chang Shen Chang,Chen Tzu Jou,Lin Wei Chih,Peng Shao Yu,Lee Tzu Tai 아세아·태평양축산학회 2020 Animal Bioscience Vol.33 No.9

Objective: The purpose of this study was to investigate whether goose growth and feather characteristics are influenced by their line and feeding surroundings, inclusive of floor materials and types, since there are no reports regarding these factors. Methods: The 240 White Roman geese which were hatched and sex identified came from 3 commercial goose farms. They were randomly distributed to 24 pens depending on a completely random design. The study continued for 13 weeks and included 3 lines of commercial geese and 2 floor types (cement strip floor [CSF] or cement floor [CF]). Results: The day one gosling weight from A farm was lower than other two farms (96 g vs 107 and 115 g; p<0.001). Afterwards, the body weight, back length, keel length, chest girth and main wing feather length among 3 farms showed no significance difference prior to 12 weeks. The CF group showed heavier body weight, shorter back length, longer keel length, shorter chest girth and shorter main wing feather length than the CSF group prior to 12 weeks. The down weight in the CF was heavier than the CSF group (57.1 g vs 41.8 g; p<0.01) prior to 13 weeks. Conclusion: The body weight showed the positive relations for dry feather weight (r = 0.59), down weight (r = 0.69), percent of the down weight of live body weight prior to 13 weeks (r = 0.61).

A 3D Thermal Field Restructuring Method for Concrete Dams Based on Real-Time Temperature Monitoring

Peng Lin,Haoyang Peng,Qixiang Fan,Yunfei Xiang,Zongli Yang,Ning Yang 대한토목학회 2021 KSCE JOURNAL OF CIVIL ENGINEERING Vol.25 No.4

Temperature monitoring and control is of great significance to ensure concrete quality during the construction of dam concrete. In this study, a 3D thermal field restructuring method is developed for the complex evolution process of thermal field in dam concrete during construction, based on real-time temperature monitoring. The proposed method is related to the ordinary Kriging interpolation and the distributed optical fiber temperature sensing (DTS) technology. Based on the temperature monitoring of the Wudongde (WDD) super-high arch dam, the 3D thermal field can be acquired effectively and fast by the proposed restructuring method. The results indicate the temperature difference between the temperature measured by thermometers and the restructured temperature is within 1°C. The evolution process of the restructured 3D thermal field for the WDD arch dam is in good agreement with the site situation. In addition, the uncertainty, cons and pros of the proposed method and the optimal layout of temperature sensors are further discussed. Although the proposed thermal field restructuring method has some limitations, it is believed to be a valuable tool for acquiring the 3D thermal field and thermal gradient of dam concrete.

An Arabidopsis SUMO E3 Ligase, SIZ1, Negatively Regulates Photomorphogenesis by Promoting COP1 Activity

Lin, Xiao-Li,Niu, De,Hu, Zi-Liang,Kim, Dae Heon,Jin, Yin Hua,Cai, Bin,Liu, Peng,Miura, Kenji,Yun, Dae-Jin,Kim, Woe-Yeon,Lin, Rongcheng,Jin, Jing Bo Public Library of Science 2016 PLoS genetics Vol.12 No.4

<P>COP1 (CONSTITUTIVE PHOTOMORPHOGENIC 1), a ubiquitin E3 ligase, is a central negative regulator of photomorphogenesis. However, how COP1 activity is regulated by post-translational modifications remains largely unknown. Here we show that SUMO (small ubiquitin-like modifier) modification enhances COP1 activity. Loss-of-function siz1 mutant seedlings exhibit a weak constitutive photomorphogenic phenotype. SIZ1 physically interacts with COP1 and mediates the sumoylation of COP1. A K193R substitution in COP1 blocks its SUMO modification and reduces COP1 activity in vitro and in planta. Consistently, COP1 activity is reduced in siz1 and the level of HY5, a COP1 target protein, is increased in siz1. Sumoylated COP1 may exhibits higher transubiquitination activity than does non-sumoylated COP1, but SIZ1-mediated SUMO modification does not affect COP1 dimerization, COP1-HY5 interaction, and nuclear accumulation of COP1. Interestingly, prolonged light exposure reduces the sumoylation level of COP1, and COP1 mediates the ubiquitination and degradation of SIZ1. These regulatory mechanisms may maintain the homeostasis of COP1 activity, ensuing proper photomorphogenic development in changing light environment. Our genetic and biochemical studies identify a function for SIZ1 in photomorphogenesis and reveal a novel SUMO-regulated ubiquitin ligase, COP1, in plants.</P>

Waterlogging influences the physiology index and antioxidant enzyme activity in Cucurbita maxima and Cucurbita moschata

Lin Kuan-Hung,Chen Shi-Peng,Su Yi-Ru,Tsai Yi-Heng,Lin Hsin-Hung 한국원예학회 2024 Horticulture, Environment, and Biotechnology Vol.65 No.1

Waterlogging is one of the major environmental challenges that can adversely impact squash growth, development, and productivity. Nevertheless, studies on the physiological changes of squash to waterlogging stress are scarce. Previously, we reported that the Cucurbita moschata (Cmo) Early Price (Ep) cultivar showed higher chlorophyll content (CC) and spectral refl ectance compared to the Cucurbita maxima (Cma) OK-101 (Ok) cultivar after waterlogging. In the present work, we further examined more physiological parameters in eight cultivars of Cmo and Cma, and studied whether these non-destruc tive indices could effi ciently identify various waterlogging-tolerant genotypes and were consistent with visual evaluations. Moreover, we investigated the eff ects of waterlogging on the antioxidant system of cucurbit species, and evaluated dynamic changes occurring in these plants during varying waterlog periods by determining physiological characteristics. The activ ity of ascorbate peroxidase (APX) and superoxide dismutase (SOD) showed a signifi cant increase in Ep plant leaves and roots after 72 h and 6 h of waterlogging, respectively, compared to Ok plants. In addition, Ep exhibited a higher tolerance to waterlogging than Ok in terms of enhanced root length, values in CC, spectral refl ectance, and APX and SOD activity, plus decreased levels of electrolyte leakage, 2,2-diphenyl-1-picrylhydrazyl free radical scavenging, and hydrogen peroxide levels. This study provides a comprehensive understanding of the physiological variations in response to waterlogging stress and can potentially be used to breed cucurbit species with waterlogging tolerance for a wetter future climate.

모바일 미디어 환경에서 공중플랫폼의 수용자 지속사용의도에 관한 연구

Peng, Zhi Lin,윤민석(Min-Suk YOON) 한국IT서비스학회 2020 한국IT서비스학회 학술대회 논문집 Vol.2020 No.1

모바일 인터넷이 급속하게 발전함에 따라서 모바일 디바이스를 중심으로 정보를 전파하고 공유하는 모바일 미디어 시대로 접어들었다. 중국의 많은 관련 기업들은 이런 변화에 적응해서 위챗 공중플랫폼(WeChat Public Platform)을 신청하고 다양한 콘텐츠를 통한 비즈니스블 추구하고 있다. 지금까지 위챗 공중플랫폼에 대한 연구블 보면 크게 기능과 특징, 발전과 추세, 실제적 활용, 영향요소 등으로 구분된다. 이 중에 공중플랫폼의 영향요소에 관한 연구는 다른 연구에 비하여 대단히 적다. 특히 사용자 대상으로 공중플랫폼의 지속적 사용요인에 영향을 비치는 근원적 요인에 관한 연구가 아직 미미한 실정이다. 이에 본 연구는 공중플랫폼 수용자의 지속사용의도에 미치는 원천적인 영향요인을 살펴보고자 가치이론 기반으로 기대일치이론을 결합하고 관련된 변수를 탐색하였다. 문헌고찰을 통하여 콘텐츠 관련 요인, 인터페이스, 사회적 관계 및 성능 등 5 개 의 독립변수를 선택하고 지각된 가치와 이용만족의 2 개 매개변수를 통하여 지속적 사용의도에 미치는 영향 관계를 파악하였다.

UWB Bi-directional Bow-tie Antenna Loaded by Rings

Lin Peng,Kai Sun,Ji-yang Xie,Yu-jie Qiu,Xing Jiang 한국물리학회 2016 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.69 No.1

Performances of bow-tie antennae can be improved by loading a ring. Specially, the distorted radiation patterns of the reference bow-tie antenna (RBA) at high frequencies become less distorted when a ring is added. That is due to the disciplined current flows trained by the ring. Furthermore, when more rings are loaded, which act as reflectors, higher directivities are obtained and, patterns become bi-directional. Antennae with no ring (RBA), one ring, two rings (three cases), three rings, and four rings are investigated. Research find that loading more rings means better directivity. The directivity of the RBA varies from 2.29 dB to 3.66 dB for the frequency band from 2.5 to 7.5 GHz while the directivity for the four-ring-loaded case varies from 4.27 dB to 7.61 dB in that frequency band.

Sequential pattern load modeling and warning-system plan in modular falsework

Peng, Jui-Lin,Wu, Cheng-Lung,Chan, Siu-Lai Techno-Press 2003 Structural Engineering and Mechanics, An Int'l Jou Vol.16 No.4

This paper investigates the structural behavior of modular falsework system under sequential pattern loads. Based on the studies of 25 construction sites, the pattern load sequence modeling is defined as models R (rectangle), L and U. The study focuses on the system critical loads, regions of largest reaction forces, discrepancy between the pattern load and the uniform load, and the warning-system plan. The analysis results show that the critical loads of modular falsework systems with sequential pattern loads are very close to those with the uniform load used in design. The regions of largest reaction forces are smaller than those calculated by the uniform load. However, the regions of largest reaction forces of three models under sequential pattern loads can be considered as the crucial positions of warning-system based on the measured index of loading. The positions of the sensors for the warning-system for these three different models are not identical.