비외상성 두개내 출혈 환자에서 심근손상의 발생과 예후에 미치는 영향

강구현,황성호,이강현,조준휘,김성환,문중범,박해상,이서영,이성수,김헌주 대한응급의학회 2000 대한응급의학회지 Vol.11 No.4

Objective: The aim of this study was to investigate the clinical significance of myocardial injuries in patients with nontraumatic intracranial hemorrhage by identifying the occurrence of myocardial injury and defining its correlation with subsequent cardiovascular events. Subjects and methods: One hundred twenty-four patients with nontraumatic intracraninal hemorrhage presented to the emergency department within six hours from onset of symptoms were enrolled. Brain CT, serial electrocardiography, and echocardiography were done at the emergency center. Blood samples for troponin I and creatine kinase(CK)-MB were drawn immediately and eight hours after admission, Troponin I and CK-MB were measured using a chemiluminescent immunoassay, respectively. Results: Electrocardiographic and echocardiography abnormalities were found in 65 cases(52.4%) and 21 cases(17%), respectively. Serum troponin I and creative kinase-MB were increased in 35 cases (28.2%) and in 58 cases(46.8%), respectively. Abnormal findings of echocardiography and ECG, as well as elevated levels of serum troponin I and creative kinase-MB, were associated with an increased risk of cardiovascular event and survival. Logistic regression analysis revealed that an abnormal echcocardiographic finding and elevation of serum troponin I were factors associated with the occurrence an adverse cardiovascular event and that electrocardiographic abnormalities and initial mental status were factors associated with poor prognosis. Conclusion: This study reveals that actual myocardial injury develops in a significant proportion of patients with nontraumatic intracranial hemorrhage and that the development of the myocardial injury is associated with an adverse cardiovascular event that occurs during admission.

Sol-Gel 코팅법에 의한 TiN/Al_2O_3/Tialon 복합체의 제조 및 분석에 관한 연구

姜益均,車銀姬,韓相鉉,金勇權 慶熙大學校 1990 論文集 Vol.19 No.-

TiN/Al_2O_3/Tialon comlposite was prepared by sol-gel processing of alumina sol, TiN, AIN, and Y_2O_3. The resultant composite was calcined at 900℃ and a number of test bars were cut from the composite to press uniaxially and isostatically at 20,000 psi and to sinter at 1650℃ and 1,700℃ for one hour in nitrogen atmosphere. Examination of the bar showed the structure of the composite to be a mixure of closest packed microcrytalline materials, and its mechanical property to be available for metal cutting, abrasive, protective, and decorative object ;

표면처리된 복합레진에 대한 수리용 레진의 결합강도에 관한 연구

강현숙,최호영,민병순,박상진,최기운 慶熙大學校 齒科大學 1995 慶熙齒大論文集 Vol.17 No.1

Composite resin repair requires strong bond strength between the new and old materials. The objective of the current study was to identify the optimal treatments for sufficient bond strengths. Bondings between same kinds of materials and cross bondings using chemical curing composites and light curing composites were tested. Surface treatments included the methods of sand-blasting, acid etching and coating of bonding agent. Seven kinds cases of combinations from three kinds of methods were experimented and compared with a control group of which surfaces were highly polished. Measurements of shear bond strength and observations of surface morphologic changes using a scanning electron microscope were done. Following conclusions were drawn 1. The highest bond strength among composite resins were exhibited by the treatment of the sand-blasting and the coating of bonding agent. 2. Acid etched surfaces showed the lowest bond strength. Bond strengths obtained from experimental groups including acid etching were lower than those obtained from same kinds of experimental groups without acid etching. 3. Simple method of the coating of bonding agent produced the slightly increased bond strength on chemical curing composite and reduced bond strength on light curing composite. 4. Bonding surfaces of chemical curing composite resin showed slightly higher bond strengths than light curing composite resin, however significant differences were not confirmed statistically. 5. More significant irregular surfaces were created by sand-blasting method than acid etching method. 6. A principal component of fillers of both resins was silicon. Acid etching method produced the seperations and degradations of fillers, these were significant on light curing composite resins which containing barium fillers.

세침 흡인술을 이용한 종창된 림프절의 세포학적 평가

백강현,윤기영,최호정,정성목,이영원,조성환,박성준 忠南大學校 獸醫科大學 附設 動物醫科學硏究所 2011 動物醫科學硏究誌 Vol.18 No.1

Fine needle aspiration(FNA) cytology is considered as the diagnostic technique of choice in the assessment of swellen lymph nodes. The aim of this study is to determine the indication and diagnostic method of FNA of lymph node lesions performed at Veterinary Medicine Teaching Hospital of Chungnam National University. The records of 16 patients which had undergone FNA during the study period were retrieved. The cytological results were classified as lymphadenitis, lymphoid hyperplasia and lymphoma. Lymphoma cases were classified as B-cell origin and T-cell by immunophenotyping. The result of the FNA cytological diagnosis showed that nine (56%) of the patients were lymphoma, five (31%) of the patients were lymphoid hyperplasia and two (13%) of the patients were lymphadenitis.

급냉 제강슬래그를 잔골재로 사용한 차폐콘크리트의 공학적 특성에 관한 실험적 연구

강기웅,조성현,정원섭,권기주,김진만,김무한 대한건축학회 2004 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.24 No.1(구조계)

The steel slag, a by~product which is produced during the manufacture of steel by refining pig iron, is mainly used as road materials after aging it. It is necessary to age steel slag for long time in air because the reaction with water and free-CaO in steel slag could make the expansion of volume. This problem prevents steel slag from being used as aggregate for concrete. However, steel slag used in this study was controled by a air-jet method which rapidly cools substance melted at a high temperature. The rapid-chilling method prevents from generation of free-CaO in steel slag. The rapid-chilled steel slag is similar to be spherical shape and has the heavier specific gravity than natural aggregate. Therefore, it could be used to manufacture radiation shielding concrete as fine aggregate. This paper investigated the engineering properties of radiation shielding concrete when using rapid-chilled steel slag as fine aggregate. As results of this study, the increase of use of rapid-chilled steel slag decreased the desirable water content of concrete but developed the rate of radiation shielding of concrete. The strength of concrete using it is similar to that of concrete using river sand.

프리스트레스트 콘크리트 2경간 연속보의 휨 연성거동에 관한 연구

강원호,오승현,이상우 東亞大學校 建設技術硏究所 2006 硏究論文集 Vol.30 No.1

It is one of the important design concept th lead a ductile failure at the ultimate state for the concrete structures. If a ductile failure occurs, we can observe and predict the failure process of members and structure. Therefore, we can either avoid or count move to the collapse for the ductile failure energy. Most of the previous studies on ductility are focused on reinforced concrete members. Prestressed concrete members are supposed to be less ductile than reinforced concrete members, because the prestressing tendons have less ultimate strain. To see the ductility and re-distribution effect of prestressed concrete members, we need and experiment of the statically indeterminate members. We carry out an experiment of prestressed concrete two span continuous beam, to compare the ductile behavior. From the test, we observe that the ultimate rotation capacity of the prestressed concrete members are less than predicted by theory. It means the prestressed concrete members has more ductility than prediction, which gives conservative results in design. It needs more precise analysis to consider stain hardening of reinforcing bars and tendons to follow up the test results.

建蘭 Rhizome의 繼代培養에 關한 硏究 : Ⅰ.MS基本培地에서 生長調節物質과 Sucrose의 添加量이 Rhizome의 增殖에 미치는 影響 Ⅰ.The effects of growth regulating substance and addition quantity of sucrose on proliferation of rhizom in M.S basic culture ground.

姜鎬宗,朴相眩,蔡潤錫 진주산업대학교 1984 論文集 Vol.22 No.-

東洋系 Cymbidium屬인 建蘭의 rhizome을 大量 증식할 目的으로 MS基本 培地에 生長調節 物質의 滴定濃度와 Sucrose의 濃度를 알고저 本試驗을 遂行하였던 바 그 結果는 다음과 같다. 1. 生長調節劑의 濃度에 關係없이 Sucrose의 濃度가 2%정도일 때 rhizome의 증식이 양호하였다. 2. Sucrose의 濃度가 3% 以上이며 NAA 濃度가 1ppm이상 일때는 rhizome이 짧아지고 數도 현저히 감소하는 현상이었다. 3. 엽 분화는 대게 rhizome이 신장하여 많은 마디를 形成하고 1.5㎝이상 자랐을 때 그 선단에서 잎이 분화하였다. 4. rhizome을 치상할 때 횡식(橫殖)으로 치상하면 個體數가 증가하며 上向性의 경향이고 종식(縱殖)할 경우는 rhizome이 세장하면서 下向性의 경향이었으나 대체로 下向性이었다. This experiment was carried out to find the optimum concentration of growth regulate substrates and sucrose for mass production of the orient ochid plant (cymbidium ensifolium) and the result was follows. 1. Whether the growth regulate substrates were applied or not the growth of rhizome of tested orchid was increased in the treatment of 2% Sucrose. 2. When sucrose concentration in more than 3% and NAA is more than 1ppm in the media the length of rhizome become shoter and the number of rhizome decreased. 3. After the rhizome growth up to 1.5㎝ highet in length and formed a number of nodes the leaves were seperated from the tip of the rhizomes. 4. When the rhizome were planted horizontally the number of plants increased and the rhizome growed in the air, where as when the rhizome was planted verfically it become thin and most of rhizome growed in the media

Mica에 대한 이산화티탄의 흡착에 관한 연구

강익균,한상현,김용권 慶熙大學校 1984 論文集 Vol.13 No.-

Titanium oxide was prepared by the hydrolysis of TiCl_4 and was coated on mica. The optical characteristics such as reflection and transmission of the latter was studied. The effects of concentrations of TiCl_4 on the rate of hydrolysis, particle size of hydrolysis product (Ti0_2), and crystal induction time, were found to be quite reverse to the general principle. Graphical analysises show that the crystal induction time was shorter as the concentra-tion of TiCl_4 decreased. By proper regulation of the condition of hydrolysis of TiCl_4 solution, mica pigments of colours ranging from silver-white to red was produced. Their maximum intensity of light reflection and maximum transmittance were from 300 to 800nm and from 400 to 700nm respectively.

사범대학 영어 강의에 대한 학생들의 인식 및 만족도 조사

강순희,서혁,신상근,이종원,이현주,최진영 이화여자대학교 교과교육연구소 2007 교과교육학연구 Vol.11 No.2

이 연구는 교사교육의 국제화를 지향하는 사범대학 특성화 프로그램 개발을 위한 기초 조사 차원에서 2007학년도 1학기에 146명의 사범대학 학생들을 대상으로 전공 영어 강의에 대한 인식과 만족도 등에 대해 설문조사의 방법으로 이루어졌다. 학생들의 영어 능력에 대한 자기 평가 결과, 대부분의 학생들이 자신의 영어 능력이 영어 강의 수강에 부족하고, 영어 강의에 대한 심리적 부담이 크다는 반응을 나타냈다. 또 영어 강의가 한국어 강의에 비해 전공 지식을 쌓는 데 도움이 되었다는 반응은 이공계를 중심으로 한 기존의 연구 결과보다 상대적으로 낮게 나타나는데, 이는 사범대학 영어 강의의 운영과 관련하여 좀 더 다양하고도 효과적인 방안이 고려되어야 함을 시사한다. 영어 강의 수강 시 어려움을 묻는 질문에서 과제 발표하기, 질문하기, 보고서 작성하기의 순으로 어려움을 호소하고 있는데, 이 역시 영어 강의를 위해서는 전반적인 영어 표현 및 이해 능력 향상 이 전제되어야 하며 무엇보다도 말하기, 듣기의 구어 능력 신장이 우선되어야 함을 재확인해 준다. 영어 강의 개선안에 대한 의견으로는 평가 방법의 다양성 및 융통성 확대, 영어 강의 수강을 돕는 전공 교재의 개발, 영어 강의 내에서의 교수-학생 상호 작용 증대, 국제교류의 기회 확대 등의 순으로 높은 반응을 보였다. 이는 향후 사범대학 영어 강의와 관련한 프로그램 개발에 시사하는 바가 크다. 즉, 영어 강의 평가를 결과 중심의 평가뿐만 아니라 과정평가와 수행평가에 초점을 두고, 영어 표현이 어려운 복잡한 사고 과정이 요구되는 경우 제한적으로 국문 반응을 허용하는 방안도 고려할 만하다. 또한 학습자들에게 좀 더 상세화된 강의 교재를 제공하고, 온·오프라인을 모두 활용하여 교수와 학생의 상호작용을 활성화할 수 있는 방안을 적극적으로 탐색할 필요가 있다. 아울러 학생들이 실질적인 국제교류가 가능하도록 다양한 교류 방안 함께 구체적인 강좌 개설도 요구된다.

용해성 poly(dimethy-co-diphenylsilane)공중합체의 특성과 열분해에 관한 연구

강필현,양현수,황택성,김봉만,권오현 忠南大學校 産業技術硏究所 1993 산업기술연구논문집 Vol.8 No.2

Soluble poly(dimethyl-co-diphenylsilane)copolymer,[(SiMe₂)x(SiPh₂)1-x]n where x=0.5 to 0.9., was synthesized by condensation polymerization of dimethyldichlorosilane and diphenyldichlorosilane in xylene. In the TG analysis of the copolymer, weight loss started at 170℃ and the weight residue at 1000℃ was 32%. The copolymer was stabilized by thermal oxidation at 80 to 110℃ for 5 hr. in air, and its thermal stability increased as the temperature increased. The copolymer heat treated above 700℃ showed no organic bonds of C-H and Si-CH₃. while Si-C, and Si-O large bonds were observed. Amorphous SiC was obtained by pyrolysis at 1000℃ and β-SiC at 1200 to 1400℃, in which a better crystallinity of β-SiC was observed at a higher temperature.