http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
커플링제로 MA, MAOMS가 WPC의 기계적 물성에 미치는 영향에 관한 연구
황택성,신경섭,황의환 충남대학교 공업교육연구소 1998 論文集 Vol.21 No.1
Wood powder as reinforcing fillers and polyethylene as a matrix have been used for manufacturing of wood plastic composites(WPC). In preparing WPC, coupling agents (such as Maleic anhydride(MA) and 3-methacryloxypropylmethoxysilane (MAOMS)) were also used in order to improve the bonding force between matrix and fillers. In this study, the effect of concentration of wood powder, MA, MAOMS on the mechanical properties and interface phenomena on the composites was evaluated. The tensile strength of 3wt% MA-treated composites showed its maximum value of 25.91Mpa while 3wt% MAOMS-treated composites attained the maximum value of 22.48Mpa. The maximum impact strength of MA and MAOMS-treated composites were 44.38Mpa and 36.09Mpa respectively, when 3wt% of coupling agent was introduced.
폐 FRP/불포화 폴리에스테르 수지 복합재의 기계적 물성에 미치는 실란계 커플링제 (3-methylacryloxyvinyl silane) 영향
황택성,최돈묵,최장락,임정훈,박정기,Hwang, Taek-Seong,Choe, Don-Muk,Choe, Jang-Rak,Im, Jeong-Hun,Park, Jeong-Gi 한국재료학회 1998 한국재료학회지 Vol.8 No.1
SMC(Sheet molding compound)욕조 생산시 발생하는 폐 FRP를 보강재로서 재활용하기 위하여 불포화 폴리에스테르 매트릭스 수지에 보강하고 보강재와 매트릭스 수지의 계면 결합력을 증진시키기 위하여 보강재를 실란계 커플링제[3-methylacryloxyviny1 silane (MAOS)]로 전 처리하여 복합재를 제조하고 기계적 물성 및 계면현사에 대하여 관찰하였다. 보강률이 20wt%인 복합재의 굴곡강도 및 굴곡탄성률이 각 각 110MPa, 8.0GPa로 가장 우수하였으며 커플링제(MAOS)의 노동가 0.50wt%인 복합재의 굴곡강도 및 굴곡탄성률은 약 10%정도 향상되어 각 각 120MPa, 9.2GPa을 나타내었다. 또한 주사전자현미경 관찰 결과 보강재를 커플링제(MAOS)로 처리한 복합재의 보강재와 매트릭스 수지는 물리, 화학적을 잘 결합하여 보강재와 매트릭스 수지의 계면에서 pull out현상이 확인되지 않았으며 크랙도 발생하지 않았다.
폐 FRP/석분슬러지 충전 복합재의 제조 및 기계적 물성에 관한 연구
황택성,박진원,이철호 공주대학교 자원재활용신소재지역협력센터 2000 2차년도 센터 사업 성과집 Vol.2000 No.1
SMC 욕조 생산 시 발생하는 폐 FRP와 석재 가공공정에서 발생되는 석분슬러지를 재활용하기 위하여 불포화에스테르 매트릭스 수지에 분말 충전하여 복합재를 제조하였다. 또한 충전제와 매트릭스 간의 계면결합력을 향상시키기 의해 석분을 실란 커플링제 γ-methacryloxypropyltrime-thoxysilane (γ-MPS)로 전처리하여 복합재를 제조하고 기계적 물성 및 계면현상을 관찰하였다. 복합재의 굴곡탄성율은 석분함량이 10 wt%, 실란커플링제의 농도가 3 wt%일 때 가장 우수하였으며 석분 충전량이 증가함에 따라 감소하는 경향을 보였다. 또한 복합재의 초기 열분해온도는 352∼359 ℃이었으며 이 온도에서 중량감소율은 약 3%로 충전제의 양에 관계없이 거의 일정한 경향을 보였다. γ-MPS 처리에 따른 복합재의 물성변화를 관찰한 결과 충전제와 매트릭스 수지간 계면결합력인 증진되어 물리·화학적으로 안정한 결합을 이루고 있고 pull out현상이 발생하지 않음을 확인할 수 있었다 In order to recyle the FRP waste from SMC bathtubs and rock-crush sludge obtained as a byproduct of stones, the composite consisting of the FRP and rock-crush sludge and the unsaturated polyester matrix resin were prepared. To enhance the interfacial bonding force between the reinforcements and the matrix resin, the rock-crush sludge was treated with silane coupling agent, γ-methacryloxypropyltrimethoxysilane (γ-MPS ) and their mechanical properties and interface phenomena were examined. The flexural moduius of the composite containing 10 wt% rock-crush powder treated with 3 wt% silane coupling agent showed the maximum value. And also the initial thermal degradation temperature of composites were in the range of 352∼359℃. From these results, we observed that the weight loss of composites was almost constant regardless of the concentration of silane coupling agent. It is confirmed that the interface of the composites containing filler treated with γ-MPS was improved in that were were no pull-out phenomena between the reinforcement and matrix resin.
Synthesis and properties of strong base polyketone ion exchange fibers
황택성,황성연 한국공업화학회 2019 한국공업화학회 연구논문 초록집 Vol.2019 No.0
Durable polyketone ion exchange fibers were synthesized by Paal- Knorr reaction. The water uptake and ion exchange capacity of the synthesized polyketone anion exchange fibers were measured and the surface morphology of the fibers observed. FT IR spectral analysis was used to confirm the presence or absence of synthesis. Their amination rate was confirmed by EDS analysis. The water uptake was 19.2 %, the ion exchange capacity was 1.03 meq/g, and the amination rate was 59.06 %. Based on these results, the optimal reaction conditions were identified.