Intragranular and Intergranular Crack Propagation in Nanocrystalline Ni Under Single-Cycle Mode I Loading

Yan Feng,Jie Li,Xinhua Yang 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.7

As the first step to study the fatigue crack propagation, the molecular simulations were performed to investigate theopening, propagation and closure behaviors of intragranular and intergranular cracks in nanocrystalline Ni under single-cyclemode I loading. The atomic crack angle was proposed to characterize the crack-tip blunting and sharpening quantitatively. There are obvious different mechanisms between intragranular and intergranular crack propagation. Intragranular crack propagationcould be induced by stacking faults and can change its direction very easily, but the intergranular crack perpendicularto the loading direction would propagate along the grain boundary and encounter strong resistance at the triple junction. New cracks could form in the grain boundaries ahead of the original crack. Different from the traditional understanding forintragranular and intergranular cracks, however, the dislocation density increases even in the unloading process and the cracktip is possibly sharpened temporarily during loading.

Potential Predictors of Sensitivity to Pemetrexed as First-line Chemotherapy for Patients with Advanced Non-Squamous NSCLCs

Lu, Yan-Yan,Huang, Xin-En,Xu, Lin,Liu, De-Gan,Cao, Jie,Wu, Xue-Yan,Liu, Jin,Xiang, Jin Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.3

Background: Pemetrexed (PEM) is effective in first-line treatment for patients with non-squamous non-small cell lung cancer (NSCLC). However there are currently no definitive determinants to certify which patients could benefit from PEM. To improve the efficacy of PEM combined with platinum as first-line therapy for advanced non-squamous NSCLC, we conducted this retrospective study to detect potential determinants of this regimen. Methods: We recruited 109 patients with advanced non-squamous NSCLC who received PEM with a platinum as first-line therapy from June 2006 to February 2013 in Jiangsu Cancer Hospital. Multiple variables (age, sex, smoking, degree of cell differentiation, hemoglobin, platinum drugs combined, positions of metastasis) were selected. Logistic regression analysis was used to analyse relationships between these variables and tumor response. Result: In univariate analysis, we found that age and platinum significantly influenced the results of PEM therapy (P<0.05). In multivariable analysis, no factors were independently significant. Conclusion: Our analysis did not suggest that the age, sex, metastasis of liver or other organs, hemoglobin, smoking history and pathological differentiation are associated with the response of PEM. We should conduct further analyses with larger sample size to reconfirm this issue.

Phase II Study on Javanica Oil Emulsion Injection (Yadanzi^®) Combined with Chemotherapy in Treating Patients with Advanced Lung Adenocarcinoma

Lu, Yan-Yan,Huang, Xin-En,Cao, Jie,Xu, Xia,Wu, Xue-Yan,Liu, Jin,Xiang, Jin,Xu, Lin Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.8

Purpose: To investigate the efficacy and safety of Javanica oil emulsion injection (Yadanzi$^{(R)}$) combined with pemetrexed and platinum (PP) for treating patients with advanced lung cancer. Patients and Methods: From June 2011 to June 2013, we recruited 58 patients with advanced lung cancer, and divided them into two groups. Twenty eight patients received Yadanzi$^{(R)}$ (from ZheJiang Jiuxu Pharmaceutical Co., Ltd.) together with PP chemotherapy (combined group), while the others were given only PP chemotherapy (control group). After two cycles of treatment, efficacy and safety of treatment were evaluated. Results: The overall respnse rate [(CR+PR+SD)/(CR+PR+SD+PD)] of the combined group was higher than that of control group (89.7% vs. 86.2%, p>0.05). Regarding rate of life improvement, it was 82.8% in combined group, and 51.7% in the control group (p<0.05). In terms of side effects, leukopenia in combined group was less frequent than that in control group (p<0.05). More patients in the control group were found to suffer liver toxicity. Conclusions: Javanica oil emulsion injection combined with chemotherapy could be considered as a safe and effective regimen in treating patients with advanced lung adenocarcinoma. It can improve the quality of life and reduce the possibility of leukopenia. Further clinical trials with a large sample size should be conducted to confirm whether addition of Yadanzi$^{(R)}$ to chemotherapy could increase the response rate, reduce toxicity, enhance tolerability and improve quality of life for patients with advanced lung cancer.

Clinical Observations on Associations Between the UGT1A1 Genotype and Severe Toxicity of Irinotecan

Lu, Yan-Yan,Huang, Xin-En,Wu, Xue-Yan,Cao, Jie,Liu, Jin,Wang, Lin,Xiang, Jin Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.7

Background: Severe toxicity is commonly observed in cancer patients receiving irinotecan (CPT-11) UDPglucuronosyltransferase1A1 (UGT1A1) catalyzes the glucuronidation of the active metabolite SN-38 but the relationship between UGT1A1 and severe toxicity remains unclear. Our study aimed to assess this point to guide clinical use of CPT-11. Materials and Methods: 89 cancer patients with advanced disease received CPT-11-based chemotherapy for at least two cycles. Toxicity, including GI and hematologic toxicity was recorded in detail and UGT1A1 variants were genotyped. Regression analysis was used to analyse relationships between these variables and tumor response. Results: The prevalence of grade III-IV diarrhea was 10.1%, this being more common in patients with the TA 6/7 genotype (5 of 22 patients, 22.7%) (p<0.05). The prevalence of grade III-IV neutropenia was 13.4%and also highest in patients with the TA 6/7 genotype (4 of 22 patients; 18.2%) but without significance (p>0.05). The retreatment total bilirubin levels were significantly higher in TA6/7 patients (mean, $12.75{\mu}mol/L$) with compared to TA6/6 (mean, $9.92{\mu}mol/L$) with p<0.05. Conclusions: Our study support the conclusion that patients with a $UGT1A1^*28$ allele (s) will suffer an increased risk of severe irinotecan-induced diarrhea, whether with mid-or low-dosage. However, the $UGT1A1^*28$ allele (s) did not increase severe neutropenia. Higher serum total bilirubin is an indication that patients UGT1A1 genotype is not wild-type, with significance for clinic usage of CPT-11.

Analysis of Photoluminescence for N-doped and undoped p-type ZnO Thin Films Fabricated by RF Magnetron Sputtering Method

Yan-Yan Liu,박춘배,Hu-Jie Jin,Geun C. Hoang 한국전기전자재료학회 2009 Transactions on Electrical and Electronic Material Vol.10 No.1

N-doped ZnO thin films were deposited on n-type Si(100) and homo-buffer layer, and undoped ZnO thin film was also deposited on homo-buffer layer by RF magnetron sputtering method. After deposition, all films were in-situ annealed at 800 oC for 5 minutes in ambient of O2 with pressure of 10 Torr. X-ray diffraction shows that the homo-buffer layer is beneficial to the crystalline of N-doped ZnO thin films and all films have preferable c-axis orientation. Atomic force microscopy shows that undoped ZnO thin film grown on homo-buffer layer has an evident improvement of smoothness compared with N-dope ZnO thin films. Hall-effect measurements show that all ZnO films annealed at 800 oC possess p-type conductivities. The undoped ZnO film has the highest carrier concentration of 1.145x1017 cm-3. The photoluminescence spectra show the emissions related to FE, DAP and many defects such as VZn, ZnO, Oi and OZn. The p-type defects (Oi, VZn, and OZn) are dominant. The undoped ZnO thin film has a better p-type conductivity compared with N-doped ZnO thin film.

Motion behavior research of liquid micro-particles filtration at various locations in a rotational flow field

Yan Yan,Yuanzai Lin,Jie Cheng,Zhonghua Ni 국제구조공학회 2017 Structural Engineering and Mechanics, An Int'l Jou Vol.62 No.2

This study presents a particle-wall filtration model for predicting the particle motion behavior in a typical rotational flow field-filtration in blower system of cooker hood. Based on computational fluid dynamics model, air flow and particles has been simulated by Lagrangian-particle/ Eulerian-gas approaches and get verified by experiment data from a manufacturer. Airflow volume, particle diameter and local structure, which are related to the particle filtration has been studied. Results indicates that: (1) there exists an optimal airflow volume of 1243 m3/h related to the most appropriate filtration rate; (2) Diameter of particle is the significant property related to the filtration rate. Big size particles can represent the filtration performance of blower; (3) More than 86% grease particles are caught by impeller blades firstly, and then splashed onto the corresponding location of worm box internal wall. These results would help to study the micro-particle motion behavior and evaluate the filtration rate and structure design of blower.

A receding contact analysis for an elastic layer reinforced with a functionally graded coating and pressed against a half-plane

Jie Yan,Changwen Mi 대한기계학회 2019 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.33 No.9

We aim to analyze the receding contact mechanics of an elastic layer reinforced by a functionally graded coating, pressed against a half-plane substrate as an integral assembly. The graded reinforcement is modeled by an inhomogeneous medium whose shear modulus is allowed to vary exponentially. A smooth receding contact is arisen due to the normal tractions applied over a finite segment of the reinforcement surface. The primary goal of this study is the determination of both the receding contact pressure and the extent of receding contact along the assembly and substrate interface. Using both an analytical and a finite element method solves the problem. In the former approach, Fourier integral transforms help convert the problem into a singular integral equation of Cauchy type, which is numerically integrated with Gauss-Chebyshev quadrature. In the numerical approach, multiple homogeneous layers approximate the graded coating. The stresses at those nodes lying on sublayer interfaces are averaged over their surrounding elements for guaranteeing the continuity in stress field. Very good agreements are found between the results obtained from the two methods. Extensive parametric case studies reveal that material properties, loading configuration, and geometric parameters all play important roles in the determination of both the contact pressure distribution and the length of contact. These receding contact properties can therefore be optimized as desired by appropriately varying the influential parameters. Both the solution methodologies and the numerical results presented in this work can provide some useful guidelines on the better design of multilayered functionally graded structures.

Extraction of Key Frames from Dance Videos and Movement Recognition by Multi-feature Fusion

Jie Yan 대한전자공학회 2023 IEIE Transactions on Smart Processing & Computing Vol.12 No.6

Dance videos contain numerous complex movements that make movement recognition difficult. The multi-feature fusion method proposed in this paper first takes color and texture features of video frames for clustering, and then extracts key frames. Based on the key frames, spatial and temporal features, respectively, are extracted by using long short-term memory and a three-dimensional convolutional neural network. A multi-feature fusion method designed for movement recognition is used in experiments conducted with both the DanceDB dataset and a selfbuilt dataset. The results show that the proposed multi-feature fusion method has high recall and precision ratios for key frame extraction, and achieved recognition accuracy of 42.67% and 50.64% with DanceDB and the self-built dataset, respectively. This paper validates the effectiveness of the proposed method for key frame extraction and movement recognition in dance videos, and suggests potential practical applications. The approach improves the reliability of video processing and provides theoretical support for further research on deep learning methods in the field of video processing.

Well-designed Te/SnS₂/Ag artificial nanoleaves for enabling and enhancing visible-light driven overall splitting of pure water

Yan, Changzeng,Xue, Xiaolan,Zhang, Wenjun,Li, Xiaojie,Liu, Juan,Yang, Songyuan,Hu, Yi,Chen, Renpeng,Yan, Yaping,Zhu, Guoyin,Kang, Zhenhui,Kang, Dae Joon,Liu, Jie,Jin, Zhong unknown 2017 Nano energy Vol.39 No.-

<P><B>Abstract</B></P> <P>To produce hydrogen and oxygen from photocatalytic overall splitting of pure water provides a promising green route to directly convert solar energy to clean fuel. However, the design and fabrication of high-efficiency photocatalyst is challenging. Here we present that by connecting different nanostructures together in a rational fashion, components that cannot individually split water into H<SUB>2</SUB> and O<SUB>2</SUB> can work together as efficient photocatalyst with high solar-to-hydrogen (STH) energy conversion efficiency and avoid the use of any sacrificial reagent. Specifically, Te/SnS<SUB>2</SUB>/Ag artificial nanoleaves (ANLs) consist of ultrathin SnS<SUB>2</SUB> nanoplates grown on Te nanowires and decorated with numerous Ag nanoparticles. The appropriate band structure of Te/SnS<SUB>2</SUB> p-n junctions and the surface plasmon resonance of Ag nanoparticles synergistically enhance the quantum yield and separation efficiency of electron-hole pairs. As a result, Te/SnS<SUB>2</SUB>/Ag ANLs enable visible-light driven overall water-splitting without any sacrificial reagent and exhibit high H<SUB>2</SUB> and O<SUB>2</SUB> production rates of 332.4 and 166.2μmolh<SUP>−1</SUP>, respectively. Well-preserved structure after long-term measurement indicates its high stability. It represents a feasible approach for direct H<SUB>2</SUB> production from only sunlight, pure water, and rationally-designed ANL photocatalysts.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Te/SnS<SUB>2</SUB>/Ag ANLs heterostructure is prepared to catalyze overall water splitting. </LI> <LI> The catalyst show impressive H<SUB>2</SUB> and O<SUB>2</SUB> production rate under visible light. </LI> <LI> The structure and efficiency of catalyst shows no degradation after 10 days. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

본초 광물로서의 활용을 위한 산지별 전기석의 광물학적 연구

Yan Jie,김선옥(Seon-ok Kim),박희율(Hee Yul Park),박맹언(Maeng-Eon Park) 대한자원환경지질학회 2018 자원환경지질 Vol.51 No.4

이 연구는 전기석이 본초 광물의 활용 가능성을 평가하기 위하여 중국 산동성 흑색 전기석 5종, 브라질 미나스 제 라이스(Minas Geraris)광산의 흑색 및 핑크색 전기석 2종, 한국 대유광산 흑색 전기석 1종을 대상으로 전자탐침미세 분석, X-선 회절분석, 유도결합플라스마 분광방출분석, 퓨리에변환 적외선분광분석, 원적외선 분석, 핵자기공명분석 및 물-전기석 반응에 따른 pH-DO 변화를 수행하였다. 또한, 전기석 찜질방의 온열효과와 전기석 분말을 첨가한 비누가 피부에 미치는 영향을 검토하였다. 연구에 사용된 전기석 시료들은 철과 알루미늄 및 붕소 함량이 높은 유형으로 분류되며, 칼슘, 나트륨, 칼륨, 철과 붕소 함량변화는 전기석의 고용체 특성을 반영한다. CaO/(CaO+Na2O)와 MgO/ (FeO+MgO) 함량비는 높은 정(+)의 상관관계를 갖는다. 전기석 분말과 증류수와의 반응에서 DO값은 반응시간의 경과에 따라 낮아지며, DO=10에서 안정된다. pH는 6시간까지 증가되고, 24시간 이후에는 대체적으로 pH=8에서 안정된 상태를 유지한다. 전기석은 단파장에서 흡수 스펙트럼의 강도와 투과율이 낮아지며, 흡수 스펙트럼의 파장과 강도는 구성 원소의 함량과 결정학적 특징에 따라 달라진다. 특히, 철의 함량증가는 방사량을 감소시키는 원인이 되는 것으로 확인되었다. 전기석의 철 함량과 원적외선 방사량의 상관관계는 높은 정(+)의 상관성을 가지며, 알루미늄과 마그네슘 함량은 부(-)의 상관관계를 나타낸다. 증류수와 전기석 분말의 반응은 17O- NMR 반치폭을 감소시키는 것으로 확인되었다. 전기석에 의한 고온 찜질방(약 100oC 사우나)에서의 온열효과는 체온을 0.5-1.5oC 정도 높이며, 맥박은 평균 12회, 혈압은 10mg Hg 상승한다. 전기석 비누는 피부에 매우 좋은 효과를 나타내며, 알레르기와 아토피 등의 문제성 피부에서 보통이상의 개선 효과를 갖는 것으로 확인되었다. In this study, we have performed electron probe micro analyzer (EPMA), X-ray differaction (XRD), inductively coupled plasma spectroscopy (ICP), Fourier transform Raman spectroscopy (FT-Raman), far-infrared (FIR), nuclear magnetic resonance (NMR), and pH-DO Analyses for characterizing medicinal mineralogy aspect of the black tourmaline (Shantung, china), black and pink tourmaline (Minas Geraris, Brazil), black touemaline (Daeyu mine, Korea). In addition, heating effects of the tourmaline sauna as well as the effects of tourmaline powder-added soap on skin troubles have been investigated. It has been revealed that chemical composition of the tourmaline is either high in Fe-, Al-, B-rich types. Ratio of the K-Ca, Na-K, and Fe-B reflects the component change property of solid solution. CaO/CaO+Na2O and MgO/FeO+MgO ratio show high positive correlation. When tourmaline reacts with distilled water, extended reaction time DO values approximately decrease and it stabilizes at DO = 10. Otherwise, pH values increase until 6 hours and it stabilizes at pH = 8 after 24 hours. Distilled water changes to alkaline when it reacts with tourmaline powder and particles. Tourmaline showed lower absorption spectrum strength and transmittance at short wave, where absorption spectrum wavelength and strength were determined by the content of the composition elements and characteristics of crystallography. Increase of the Fe content has been confirmed to be the cause for the reduction of irradiation. For the chemical composition and spectral property of the tourmaline particle samples, it has been found that Si and Fe contents show positive correlation with Far-Infrared irradiation, while Al and Mg contents show negative correlation. For tourmaline powder, it has been confirmed that 17O-NMR FWHM (full width at half maximum) decreases when reacts with distilled water. Tourmaline sauna (approximately 100oC) was found to increase 0.5-1.5oC of body temperature, average of 12 heartbeat, and 10mg Hg of blood pressure. Tourmaline soap had very good aesthetic effect to skin and was confirmed to have above the average improvements to skin troubles (e.g., allergy or atopy).