IoT-base Generic Intelligent Wireless Sensing Platform for Real-time Data Collection and Distribution Data Analysis

( Yu-cheng Yang ),( Kai-sheng Tseng ),( Xiang-yu Huang ),( Sheng-hao Chen ),( Joe-air Jiang ) 한국농업기계학회 2018 한국농업기계학회 학술발표논문집 Vol.23 No.1

In this study, a generic intelligent wireless sensing platform with the IoT and wireless transmission technology is established for greenhouse monitoring, which is capable of greenhouse data collection and analysis. The data analyzed by a cloud server would provide important information regarding the efficiency of greenhouse management and cultivation methods. To monitor greenhouse related parameters, an embedded board is placed in a greenhouse as the gateway. Monitoring data and images collected by sensors deployed in the greenhouse are transmitted to the embedded board via an Ethernet or wireless transmission module. The data are eventually sent to a database by wireless AP. The AP connects to the internet by using a 4G USB dongle, which can provide sufficient data transmission speed for real-time data transmission. In wireless hotspots and areas with Wi-Fi, not only can images be transmitted to the cloud, but also can the mobile APP be used to perform remote monitoring, so experimental observations are no longer affected by geographical impacts. Moreover, to ensure the preservation of images and numeric data, the gateway carries a high durability secure digital (SD) memory card to store images and data; if the network encounters some problems, such as unable to connect and a lack of network traffic, the data can be stored in the SD card. Thus, the proposed platform is able to perform heavy information transmission duties and support performing all wireless monitoring tasks. In addition, the analyzed data can be used by agricultural personnel to provide critical cultivation suggestions.

The association between acupuncture therapy and the risk of reduced pressure ulcers in dementia patients: a retrospective matched cohort study

Huang Chia-Yu,Wu Mei-Yao,Huang Ming-Cheng,Yu Teng-Shun,Yen Hung-Rong 한국한의학연구원 2023 Integrative Medicine Research Vol.12 No.3

Background: The pressure ulcer is a complication from dementia. The aim of this study is to study the association between the developing of pressure ulcers and the use of acupuncture therapy in patients with dementia. Methods: We performed a retrospective 1:1 propensity score-matched cohort study to investigate the association between acupuncture therapy and the risk of pressure ulcers in patients with dementia. Results: A total of 8,994 patients were identified, 237 patients in the acupuncture cohort and 362 patients in the no-acupuncture cohort developed pressure ulcers. A reduced cumulative incidence of pressure ulcers was observed in the acupuncture cohort (P < .001). The association between acupuncture and reducing the incidence of pressure ulcers was not affected by sex, age, residence, income, or comorbidities. The variables of etiologies to cause dementia did not change the final result. In the subgroups analyses, the patients without medication for dementia controlling had significant lower rate of pressure ulcers development when they had accepted acupuncture therapy (log-rank test, P <.001). Conclusion: Our results revealed the association between acupuncture therapy and a reduced incidence of pressure ulcer development in patients with dementia. This finding offers important ideas for further research.

Thermal Stability, Adhesion and Electrical Studies on (Ti,Zr)Nx Thin Films as Low Resistive Diffusion Barriers between Cu and Si

Cheng-Lin Huang,Chih-Huang Lai,Po-Hao Tsai,Yu-Lin Kuo,Jing-Cheng Lin,Chiapyng Lee 대한금속·재료학회 2014 ELECTRONIC MATERIALS LETTERS Vol.10 No.3

In this study, we investigated the thermal stability, wettability, adhesion and reliability of (Ti,Zr)Nx films used as the diffusion barrier between Cu and Si. (Ti,Zr)Nx films were prepared by DC reactive magnetron sputtering from a Ti-5 at. % Zr alloy target in N2/Ar gas mixtures. A minimum film resistivity of 59.3 μΩ cm was obtained at an N2/Ar flow ratio of 2.75, which corresponds to the near stoichiometric composition (N/(Ti,Zr) ratio ~0.95). The sheet resistance of Cu/(Ti,Zr)N0.95/Si was not significantly increased until annealing above 750°C, indicating good thermal stability. On the other hand, the adhesion energy between Cu and the (Ti,Zr)Nx film was reduced as the N/Ti ratio was increased. To obtain reliable performance on stress-induced-voiding (SIV) and electromigration (EM) tests, we proposed to use (Ti,Zr)/(Ti,Zr)Nx/(Ti,Zr) tri-layers. We suggest that the interfacial adhesion between barrier and Cu plays an important role in reliability. The proposed tri-layer structure may be a promising candidate for a barrier, as it exhibits excellent reliability without increasing resistance.

Localized surface plasmon resonance enhanced by the light-scattering property of silver nanoparticles for improved luminescence of polymer light-emitting diodes

Cheng-Liang Huang,Hung Ji Huang,Sy-Hann Chen,Yu-Siang Huang,Po-Ching Kao,Yuan-Fong Chou Chau,Hai-Pang Chiang 한국공업화학회 2021 Journal of Industrial and Engineering Chemistry Vol.103 No.-

This study used photochemical reduction to successfully synthesize triangular silver nanoplates (TAgNPs)and silver nanodecahedrons (AgNDs) with higher light-absorption and higher light-scattering properties,respectively, for the same wavelength. To analyze the contribution of light-absorption and lightscatteringof silver nanoparticles to the localized surface plasmon resonance (LSPR) effect, poly(3,4-ethylenedioxythiophene) polystyrene sulfonate was doped with TAgNPs or AgNDs at the same concentration(1.17 lg/cm2) and made into polymer light-emitting diodes (PLEDs). According to the current densityvoltageluminancecharacteristics and electroluminescence (EL) spectra, the enhancement factors for currentefficiency and EL intensity for AgND-containing PLEDs were found to be higher than those for PLEDwith TAgNPs by 24.9% and 138%, respectively. This shows that the metal nanoparticles with higher lightscatteringproperty can induce a relatively strong LSPR effect, which possibly gives a hint to design plasmonicphotovoltaic in future.

Cerebral hyperperfusion syndrome after endovascular stent graft reconstruction for postirradiated carotid blowout syndrome: a case report

Huang Yu-Cheng,Lin Yen-Heng,Lee Chung-Wei,Liao Ting-Wei 대한신경집중치료학회 2022 대한신경집중치료학회지 Vol.15 No.2

Background: Cerebral hyperperfusion syndrome (CHS) is a failure of autoregulation after a revascularization procedure. It has rarely been reported in patients with no pre-existing cerebral hypoperfusion. Case Report: We present a rare case of a patient who underwent stent graft implantation to treat postirradiated carotid blowout syndrome. The patient developed hypertension, focal neurological deficit, and seizures after the procedure; neuroimages revealed ipsilateral cerebral edema, swelling, and increased cerebral perfusion. CHS was diagnosed based on clinical and radiological findings. The patient recovered gradually after receiving supportive care. Conclusion: Owing to the risk of CHS, monitoring for cerebral perfusion and prevention of hypertension is suggested for patients who undergo stent graft placement for postirradiated carotid blowout syndrome.

IoT-base Generic Intelligent Wireless Sensing Platform for Real-time Data Collection and Distribution Data Analysis

( Yu-cheng Yang ),( Kai-sheng Tseng ),( Xiang-yu Huang ),( Sheng-hao Chen ),( Joe-air Jiang ) 한국농업기계학회 2018 한국농업기계학회 학술발표논문집 Vol.23 No.1

In this study, a generic intelligent wireless sensing platform with the IoT and wireless transmission technology is established for greenhouse monitoring, which is capable of greenhouse data collection and analysis. The data analyzed by a cloud server would provide important information regarding the efficiency of greenhouse management and cultivation methods. To monitor greenhouse related parameters, an embedded board is placed in a greenhouse as the gateway. Monitoring data and images collected by sensors deployed in the greenhouse are transmitted to the embedded board via an Ethernet or wireless transmission module. The data are eventually sent to a database by wireless AP. The AP connects to the internet by using a 4G USB dongle, which can provide sufficient data transmission speed for real-time data transmission. In wireless hotspots and areas with Wi-Fi, not only can images be transmitted to the cloud, but also can the mobile APP be used to perform remote monitoring, so experimental observations are no longer affected by geographical impacts. Moreover, to ensure the preservation of images and numeric data, the gateway carries a high durability secure digital (SD) memory card to store images and data; if the network encounters some problems, such as unable to connect and a lack of network traffic, the data can be stored in the SD card. Thus, the proposed platform is able to perform heavy information transmission duties and support performing all wireless monitoring tasks. In addition, the analyzed data can be used by agricultural personnel to provide critical cultivation suggestions.

Hydration of DCPD over sulfonic acid-functionalized SBA-15 catalyst

Yu-Cheng Lin,Yu-Wei Huang,Ku-Hsiang Sung,Tsung-Han Lin,Soofin Cheng 한국공업화학회 2016 Journal of Industrial and Engineering Chemistry Vol.44 No.-

Sulfonic acid-functionalized SBA-15 materials (SA-SBA-15) with ordered channeling pores weresynthesized by one-pot co-condensation and used to catalyze the hydration of dicyclopentadiene(DCPD). The target product, cydecanol (DCPD-OH) has been used as a modifier for polyester or alkydresin. Propylsulfonic acid functionalized SBA-15 was found to be more efficient than the silica gelcounterpart or arylsulfonic acid functionalized material in catalyzing DCPD hydration to yield DCPD-OH. The DCPD conversion and DCPD-OH yield increased with the decrease in H2O/DCPD ratio. Optimal DCPDconversion and DCPD-OH selectivity were obtained with the molar composition of DCPD:H2O:H+[1TD$DIF]-catalyst = 1:30:0.1.

Enhanced Strength-Ductility Synergy in Mg-0.5 wt%Ce Alloy by hot Extrusion

Hui Yu,Yu Liu,Ya Liu,Dongliang Wang,Yuling Xu,Binan Jiang,Weili Cheng,Lixin Huang,Weineng Tang,Wei Yu 대한금속·재료학회 2023 METALS AND MATERIALS International Vol.29 No.7

The microstructure and mechanical properties of micro-alloyed Mg-0.5 wt%Ce alloys are investigated systemically in this study. It shows that Mg-Ce binary system is very sensitive to extrusion temperature. On the one hand, the high tensile yield strength (TYS) of 343 MPa was obtained by extrusion at 250 °C mainly due to the combined effects of profuse nano-precipitation phase, grain refinement, texture strengthening and high-density dislocation; On the other hand, the excellent elongation of 30% was acquired by extrusion at 300 °C resulting from the elimination of dislocations as well as the modification of texture.

Advanced Application of Centralized Control for a Scanning Mirror System Based on EtherCAT Fieldbus

Ruei-Yu Huang,Yen-Jen Chen,Yu-Xian Chen,Chung-Wei Cheng,Mi-Ching Tsai,An-Chen Lee 제어·로봇·시스템학회 2021 International Journal of Control, Automation, and Vol.19 No.3

Distributed control is the most popular control strategy for controlling numerous slave devices. However, the performance of slave devices is hard to improve because the control algorithm is handled by the commercial slave devices. Therefore, this paper proposes a hybrid control structure that follows the concept of centralized control strategy and handles part of the control loop on the master computer in a distributed control system through EtherCAT fieldbus. In this study, different advanced control methods such as robust control and learning control were applied to handle the position control loop of a scanning mirror system in a selective laser melting (SLM) system with stringent demand of position error around 40 µm based on EtherCAT fieldbus. By designing a proper controller, the experiment results showed that the tracking performance was significantly improved. The tracking error dropped by about 80% after the proposed hybrid control structure was applied. By applying the proposed hybrid control structure, one can improve the high-performance-requirement devices, while reducing the calculationburden of the master computer for other low-performance-requirement devices by retaining the benefit of distributed Control.

Microstructure evolution and effect on deuterium retention in oxide dispersion strengthened tungsten during He⁺ irradiation

Ding, Xiao-Yu,Xu, Qiu,Zhu, Xiao-yong,Luo, Lai-Ma,Huang, Jian-Jun,Yu, Bin,Gao, Xiang,Li, Jian-Gang,Wu, Yu-Cheng Korean Nuclear Society 2020 Nuclear Engineering and Technology Vol.52 No.12

Oxide dispersion-strengthened materials W-1wt%Pr₂O₃ and W-1wt%La₂O₃ were synthesized by wet chemical method and spark plasma sintering. The field emission scanning electron microscopy (FE-SEM) analysis, XRD and Vickers microhardness measurements were conducted to characterize the samples. The irradiations were carried out with a 5 keV helium ion beam to fluences up to 5.0 × 10²¹ ions/m² under 600 ℃ using the low-energy ion irradiation system. Transmission electron microscopy (TEM) study was performed to investigate the microstructural evolution in W-1wt%Pr₂O₃ and W-1wt%La₂O₃. At 1.0 × 10²⁰ He⁺/m², the average loops size of the W-1wt%Pr₂O₃ was 4.3 nm, much lower than W-1wt% La₂O₃ of 8.5 nm. However, helium bubbles were not observed throughout in both doped W materials. The effects of pre-irradiation with 1.0 × 10²¹ He⁺/m² on trapping of injected deuterium in doped W was studied by thermal desorption spectrometry (TDS) technique using quadrupole mass spectrometer. Compared with the samples without He⁺ pre-irradiation, deuterium (D) retention of doped W materials increased after He⁺ irradiation, whose retention was unsaturated at the damage level of 1.0 × 10²²D₂⁺/m². The present results implied that irradiation effect of He⁺ ions must be taken into account to evaluate the deuterium retention in fusion material applications.