http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Photocatalytic study of Zinc Oxide with bismuth doping prepared by spray pyrolysis
Lin, Tzu-Yang,Hsu, Yu-Ting,Lan, Wen-How,Huang, Chien-Jung,Chen, Lung-Chien,Huang, Yu-Hsuan,Lin, Jia-Ching,Chang, Kuo-Jen,Lin, Wen-Jen,Huang, Kai-Feng Techno-Press 2015 Advances in nano research Vol.3 No.3
The unintentionally doped and bismuth (Bi) doped zinc oxide (ZnO) films were prepared by spray pyrolysis at $450^{\circ}C$ with zinc acetate and bismuth nitrate precursor. The n-type conduction with concentration $6.13{\times}10^{16}cm^{-3}$ can be observed for the unintentionally doped ZnO. With the increasing of bismuth nitrate concentration in precursor, the p-type conduction can be observed. The p-type concentration $4.44{\times}10^{17}cm^{-3}$ can be achieved for the film with the Bi/Zn atomic ratio 5% in the precursor. The photoluminescence spectroscopy with HeCd laser light source was studied for films with different Bi doping. The photocatalytic activity for the unintentionally doped and Bi-doped ZnO films was studied through the photodegradation of Congo red under UV light illumination. The effects of different Bi contents on photocatalytic activity are studied and discussed. Results show that appropriate Bi doping in ZnO can increase photocatalytic activity.
Cheng-Lin Huang,Chih-Huang Lai,Po-Hao Tsai,Yu-Lin Kuo,Jing-Cheng Lin,Chiapyng Lee 대한금속·재료학회 2014 ELECTRONIC MATERIALS LETTERS Vol.10 No.3
In this study, we investigated the thermal stability, wettability, adhesion and reliability of (Ti,Zr)Nx films used as the diffusion barrier between Cu and Si. (Ti,Zr)Nx films were prepared by DC reactive magnetron sputtering from a Ti-5 at. % Zr alloy target in N2/Ar gas mixtures. A minimum film resistivity of 59.3 μΩ cm was obtained at an N2/Ar flow ratio of 2.75, which corresponds to the near stoichiometric composition (N/(Ti,Zr) ratio ~0.95). The sheet resistance of Cu/(Ti,Zr)N0.95/Si was not significantly increased until annealing above 750°C, indicating good thermal stability. On the other hand, the adhesion energy between Cu and the (Ti,Zr)Nx film was reduced as the N/Ti ratio was increased. To obtain reliable performance on stress-induced-voiding (SIV) and electromigration (EM) tests, we proposed to use (Ti,Zr)/(Ti,Zr)Nx/(Ti,Zr) tri-layers. We suggest that the interfacial adhesion between barrier and Cu plays an important role in reliability. The proposed tri-layer structure may be a promising candidate for a barrier, as it exhibits excellent reliability without increasing resistance.
Cheng-Lin Huang,Chih-Huang Lai,Po-Hao Tsai,Hsing-An Huang,Jing-Cheng Lin,Chiapyng Lee 대한금속·재료학회 2013 ELECTRONIC MATERIALS LETTERS Vol.9 No.5
NbN films were prepared by radio frequency reactive magnetron sputtering and then employed as diffusion barriers between Cu and Si. The microstructure of the NbN films was an assembly of very small columnar crystallites with a cubic structure. To investigate the properties as diffusion barriers, we performed metallurgical reactions of Cu/NbN0.8/Si, Cu/Nb/Si and Cu/TaN0.7/Si for comparisons. The sheet resistance increased dramatically after annealing above 750°C for Cu/NbN0.80/Si, and above 500°C for both Cu/Nb/Si and Cu/TaN0.7/Si. The interfaces were deteriorated seriously and formation of Cu3Si was observed when the sheet resistance was significantly increased. The diffusion coefficient of Cu in NbN barrier films was estimated by using the change of resistance (ΔRs/Rs %). Compared with TaN0.7, NbN0.8 films possess larger grain size and lower Cu diffusion coefficient. Our results suggest that the NbN film can be used as a diffusion barrier for Cu metallization as compared to the well-known TaN film.
Jan-Yi Lin,Mei-Chen Lin,Yan-Yu Lin,Ting An Lin,Chen-Hung Huang,Ching-Wen Lou,Jia-Horng Lin 한국섬유공학회 2021 Fibers and polymers Vol.22 No.3
In this study, the coating process is employed on metal wire to help improve the friction resistant property ofcarbon fibers, thereby provides more application feasibility. The yarn coating technique for reinforcement and woven fabricprocess are used to produce carbon/stainless steel/polyester/polypropylene/acrylic (CSPPA) woven fabrics that arecharacterized with softness and a light weight. The constituent coated yarns exhibit good conductivity after being coated witha PP layer, and likewise strengthen the woven fabrics in terms of mechanical behavior of tensile strength, elongation, bendingtorsion, creep resistance, and wear-resistant properties. The test results indicate that in the woven process, samples retaingood morphology. Due to PP sheath, the tensile strength of woven fabrics increases from 23 MPa to 42 MPa. Although thelamination layer numbers does not improve the EMI SE of woven fabrics, the EMI SE still reaches over 40 dB. Themanufacturing design proposed in this study provides an innovative finishing for carbon fibers without affecting the intrinsicproperties, and provides a greater range of application for carbon fibers.
( Chun-chi Lin ),( Shu-chen Wei ),( Been-ren Lin ),( Wen-sy-tsai ),( Jinn-shiun Chen ),( Tzu-chi Hsu ),( Wei-chen Lin ),( Tien-yu Huang ),( Te-hsin Chao ),( Hung-hsin Lin ),( Jau-min Wong ),( Jen-kou 대한장연구학회 2016 Intestinal Research Vol.14 No.3
Background/Aims: With the recent progress in medical treatment, surgery still plays a necessary and important role in treating ulcerative colitis (UC) patients. In this study, we analyzed the surgical results and outcomes of UC in Taiwan in the recent 20 years, via a multi-center study through the collaboration of Taiwan Society of IBD. Methods: A retrospective analysis of surgery data of UC patients from January 1, 1995, through December 31, 2014, in 6 Taiwan major medical centers was conducted. The patients’ demographic data, indications for surgery, and outcome details were recorded and analyzed. Results: The data of 87 UC patients who received surgical treatment were recorded. The median post-operative follow-up duration was 51.1 months and ranged from 0.4 to 300 months. The mean age at UC diagnosis was 45.3±16.0 years and that at operation was 48.5±15.2 years. The 3 leading indications for surgical intervention were uncontrolled bleeding (16.1%), perforation (13.8%), and intractability (12.6%). In total, 27.6% of surgeries were performed in an emergency setting. Total or subtotal colectomy with rectal preservation (41.4%) was the most common operation. There were 6 mortalities, all due to sepsis. Emergency operation and low pre-operative albumin level were significantly associated with poor survival (P =0.013 and 0.034, respectively). Conclusions: In the past 20 years, there was no significant change in the indications for surgery in UC patients. Emergency surgeries and low pre-operative albumin level were associated with poor survival. Therefore, an optimal timing of elective surgery for people with poorly controlled UC is paramount.
( Ching-ling Lin ),( Ming-lin Tsai ),( Yu-hsin Chen ),( Wei-ni Liu ),( Chun-yu Lin ),( Kai-wen Hsu ),( Chien-yu Huang ),( Yu-jia Chang ),( Po-li Wei ),( Shu-huey Chen ),( Li-chi Huang ),( Chia-hwa Lee 한국응용약물학회 2021 Biomolecules & Therapeutics(구 응용약물학회지) Vol.29 No.5
Thyroid cancer is the most common endocrine malignancy. Patients with well-differentiated thyroid cancers, such as papillary and follicular cancers, have a favorable prognosis. However, poorly differentiated thyroid cancers, such as medullary, squamous and anaplastic advanced thyroid cancers, are very aggressive and insensitive to radioiodine treatment. Thus, novel therapies that attenuate metastasis are urgently needed. We found that both PDGFC and PDGFRA are predominantly expressed in thyroid cancers and that the survival rate is significantly lower in patients with high PDGFRA expression. This finding indicates the important role of PDGF/PDGFR signaling in thyroid cancer development. Next, we established a SW579 squamous thyroid cancer cell line with 95.6% PDGFRA gene insertion and deletions (indels) through CRISPR/Cas9. Protein and invasion analysis showed a dramatic loss in EMT marker expression and metastatic ability. Furthermore, xenograft tumors derived from PDGFRA geneedited SW579 cells exhibited a minor decrease in tumor growth. However, distant lung metastasis was completely abolished upon PDGFRA gene editing, implying that PDGFRA could be an effective target to inhibit distant metastasis in advanced thyroid cancers. To translate this finding to the clinic, we used the most relevant multikinase inhibitor, imatinib, to inhibit PDGFRA signaling. The results showed that imatinib significantly suppressed cell growth, induced cell cycle arrest and cell death in SW579 cells. Our developed noninvasive apoptosis detection sensor (NIADS) indicated that imatinib induced cell apoptosis through caspase-3 activation. In conclusion, we believe that developing a specific and selective targeted therapy for PDGFRA would effectively suppress PDGFRA-mediated cancer aggressiveness in advanced thyroid cancers.
Lin Huang,Tingwen Guo,Yongjian Zhou,Dong Han,Yu Gu,Cheng Song,Feng Pan 한국자기학회 2022 Journal of Magnetics Vol.27 No.4
The casting process of Fe-Ni Invar alloy could drastically affect magnetic properties and thermal expansion. We have observed analogous trends of saturation magnetization and thermal expansion coefficient in two distinct types of casted samples, as we perform post-annealing at different temperatures. X-ray diffraction measurements show that all the alloys remain in the same face-centered cubic structure after different heat treatments without phase transformation. With the help of X-ray diffraction and differential thermal analysis, we have inferred that these changes in properties might be induced by magnetic lattice transitions and analyzed the possible reason for property differences in samples. This work delivers a perspective on the relationships between thermal expansion, magnetic properties, and heat treatments, which could help to improve the industrial assembly line design.