Preparation of porous cordierite ceramic with acid-leached coal gangue

Wang Xu-Dong,Xu Hai-Yan,Zhang Feng-Jun,Li Dong-Cai,Wang Ai-Guo,Sun Dao-Sheng,오원춘 한국세라믹학회 2020 한국세라믹학회지 Vol.57 No.4

The eff ect of impurities in coal gangue on the sintering and properties (porosity and compressive strength) of porous cordierite ceramics has been investigated by adjusting the amount of impurities by controlling the acid–gangue ratio during acid leaching. The sintering behavior and microstructure of the porous ceramics have been characterized via X-ray diff ractometry and scanning electron microscopy. The eff ects of both the acid–gangue ratio and sintering temperature on the porosity and compressive strength have been also investigated. The results indicated that both porosity and compressive strength of the porous cordierite ceramics prepared using acid-leached coal gangue were evidently improved. The content of the impurities in coal gangue was adjusted via acid leaching by controlling the acid–gangue ratio. The appropriate content of impurities in coal gangue facilitated the sintering process and improved the porosity and compressive strength of the obtained porous cordierite ceramics.

Human Liver Specific Transcriptional Factor TCP10L Binds to MAD4

( Dao Jun Jiang ),( Hong Xiu Yu ),( Sa Yin Hexige ),( Ze Kun Guo ),( Xiang Wang ),( Li Jie Ma ),( Zheng Chen ),( Shou Yuan Zhao ),( Long Yu ) 생화학분자생물학회 2004 BMB Reports Vol.37 No.4

A human gene T-complex protein 10 like (TCP10L) was cloned in our lab. A previous study showed that it expressed specifically in the liver and testis. A transcription experiment revealed that TCP10L was a transcription factor with transcription inhibition activity. In this study, the human MAD4 was identified to interact with TCP10L by a yeast two-hybrid screen. This finding was confirmed by immunoprecipitation and subcellular localization experiments. As MAD4 is a member of the MAD family, which antagonizes the functions of MYC and promotes cell differentiation, the biological function of the interaction between TCP10L and MAD4 may be to maintain the differentiation state in liver cells. Also, we propose that the up-regulation of Myc is caused by the down-regulation of TCPIOL in human hepatocarcinomas.

Experimental study on performance of steam-water injector with central water nozzle arrangement

Wen Jun Li,Dao Tong Chong,Jun Jie Yan,Wei Xiong Chen,Jin Shi Wang 한국화학공학회 2014 Korean Journal of Chemical Engineering Vol.31 No.9

The steam-water injector (SI) is a simple mechanical device that has been widely used in industry. Wedid an experimental study to find the influence of physical and geometrical parameters on performance of the SI. Thephysical parameters studied were steam inlet pressure, water inlet pressure and water inlet temperature. Whereas, thegeometrical parameters studied were steam nozzle area ratio, area ratio of steam nozzle to water nozzle and the mixingsection converging angle. Pump head was introduced to evaluate the lifting-pressure performance of the SI under dif-ferent operating and geometrical conditions. Optimal values of steam nozzle area ratio and mixing section convergingangle were 1.3 and 11.6orespectively, for the present work, and optimal value of area ratio of steam nozzle to waternozzle increased with increasing water inlet pressure. Two head-capacity curves were introduced to highlight the effectof various physical and geometrical parameters on the performance of SI.

Human Liver Specific Transcriptional Factor TCP10L Binds to MAD4

Jiang, Dao-Jun,Yu, Hong-Xiu,Hexige, Sa-Yin,Guo, Ze-Kun,Wang, Xiang,Ma, Li-Jie,Chen, Zheng,Zhao, Shou-Yuan,Yu, Long Korean Society for Biochemistry and Molecular Biol 2004 Journal of biochemistry and molecular biology Vol.37 No.4

A human gene T-complex protein 10 like (TCP10L) was cloned in our lab. A previous study showed that it expressed specifically in the liver and testis. A transcription experiment revealed that TCP10L was a transcription factor with transcription inhibition activity. In this study, the human MAD4 was identified to interact with TCP10L by a yeast two-hybrid screen. This finding was confirmed by immunoprecipitation and subcellular localization experiments. As MAD4 is a member of the MAD family, which antagonizes the functions of MYC and promotes cell differentiation, the biological function of the interaction between TCP10L and MAD4 may be to maintain the differentiation state in liver cells. Also, we propose that the up-regulation of Myc is caused by the down-regulation of TCP10L in human hepatocarcinomas.

Preparation of lithium-doped NaV6O15 thin film cathodes with high cycling performance in SIBs

Xu Hai-Yan,Ruan Jun Hai,Liu Fang Lin,Li Dong-Cai,Zhang Feng-Jun,Wang Ai-Guo,Sun Dao-Sheng,오원춘 한국세라믹학회 2022 한국세라믹학회지 Vol.59 No.3

Lithium ions-doped NaV6O15 thin films have been prepared using a simple low temperature liquid phase deposition method and subsequent annealing process. X-ray diffraction (XRD), Fourier transform infrared spectrometer (FTIR), scanning elec- tron microscopy (SEM), and photoelectron spectroscopy (XPS) have been used to study the structural and physicochemical characteristics of the NaV6O15 film. The films were grown on the FTO conductive glass and used directly as an electrode of sodium ion batteries. The prepared lithium ions-doped NaV6O15 thin film electrodes showed an excellent cycling stability and discharge capacity, which may be attributed to the stability of the Li+ embedded into the gap between the V–O layers to maintain the structure and its stable β-phase structure transformed after the first cycle. The cycling stability greatly improved with increasing annealing temperature, while the discharge capacity decreased. The capacities of the film electrodes annealed at 400 °C and 450 °C maintained above 97% after 100 cycles. The lithium-doped NaV6O15 underwent a phase transition dur- ing the first charge/discharge cycle. The new transformed phase has perfect crystal structure stability undergoing insertion and deinsertion of Na+. Therefore, the lithium-doped NaV6O15 thin film possesses good cycling stability and is expected to be a promising thin film cathode for sodium-ion batteries.

Loss Analysis and Air-Cooled Design for a Cascaded Electrical Source Transmitter

Kai-chang Xue,Shuang Wang,Jun Lin,Gang Li,Feng-dao Zhou 전력전자학회 2015 JOURNAL OF POWER ELECTRONICS Vol.15 No.2

Air-cooling method is adopted on the basis of the requirements for the thermal stability and convenient field use of an electrical source transmitter. The power losses of the transmitter are determined after calculating the losses of the alternating current (AC)?direct current (DC) power supply, the constant-current circuit, and the output circuit. According to the analysis of the characteristics of a heat sink with striped fins and a fan, the engineering calculation expression of the Nusselt number and the design process for air-cooled dissipation are proposed. Experimental results verify that the error between calculated and measured values of the transmitter losses is 12.2%, which meets the error design requirements of less than 25%. Steady-state average temperature rise of the heat sink of the AC?DC power supply is 22 °C, which meets the design requirements of a temperature rise between 20 °C and 40 °C. The transmitter has favorable thermal stability with 40 kW output power.

Loss Analysis and Air-Cooled Design for a Cascaded Electrical Source Transmitter

Xue, Kai-Chang,Wang, Shuang,Lin, Jun,Li, Gang,Zhou, Feng-Dao The Korean Institute of Power Electronics 2015 JOURNAL OF POWER ELECTRONICS Vol.15 No.2

Air-cooling method is adopted on the basis of the requirements for the thermal stability and convenient field use of an electrical source transmitter. The power losses of the transmitter are determined after calculating the losses of the alternating current (AC)-direct current (DC) power supply, the constant-current circuit, and the output circuit. According to the analysis of the characteristics of a heat sink with striped fins and a fan, the engineering calculation expression of the Nusselt number and the design process for air-cooled dissipation are proposed. Experimental results verify that the error between calculated and measured values of the transmitter losses is 12.2%, which meets the error design requirements of less than 25%. Steady-state average temperature rise of the heat sink of the AC-DC power supply is $22^{\circ}C$, which meets the design requirements of a temperature rise between $20^{\circ}C$ and $40^{\circ}C$. The transmitter has favorable thermal stability with 40 kW output power.

Safe Range of Retaining Pressure for Three-dimensional Face of Pressurized Tunnels based on Limit Analysis and Reliability Method

Jiahua Zhang,Wei-jun Wang,Dao-bing Zhang,Biao Zhang,Fei Meng 대한토목학회 2018 KSCE JOURNAL OF CIVIL ENGINEERING Vol.22 No.11

Based on the existing research, the 3D active and passive failure mechanisms of a pressurized tunnel face are constructed. The nonlinear failure criterion is introduced into the limit analysis by virtue of the tangent technique. By neglecting the randomness of soil parameters, the collapse pressure of active failure and the blowout pressure of passive failure, namely the lower and upper limit of retaining pressure, are obtained along with the failure ranges. On account of the randomness of soil properties, a three-dimensional stochastic model of a pressurized tunnel face is established, and the optimal range of retaining pressure of the pressurized tunnel face is presented on the basis of the multiple correlated failure modes. Taking Changsha Metro Line 2 as an example, the good agreement of the measured data in situ with the reasonable range of retaining pressure verifies the presented method. The combination of limit analysis and reliability method can provide more scientific and reasonable support parameters for the construction of pressurized tunnels in the future.

<i>Haloactinopolyspora alkaliphila</i> sp. nov., and emended description of the genus <i>Haloactinopolyspora</i>

Zhang, Yong-Guang,Liu, Qing,Wang, Hong-Fei,Zhang, Dao-Feng,Zhang, Yuan-Ming,Park, Dong-Jin,Kim, Chang-Jin,Li, Wen-Jun International Union of Microbiological Societies 2014 International journal of systematic and evolutiona Vol.64 No.6

<P>A facultatively alkaliphilic actinomycete strain, designated EGI 80088<SUP>T</SUP>, was isolated from a saline-alkali soil sample from Xinjiang province, north-west China, and subjected to a polyphasic taxonomic characterization. Strain EGI 80088<SUP>T</SUP> formed fragmented aerial hyphae and short spore chains, and rod-like spores aggregated at maturity. Whole-cell hydrolysates of the isolate contained <SMALL>ll</SMALL>-diaminopimelic acid as the diagnostic diamino acid, and glucosamine, mannose, galactose, glucose and rhamnose as the marker sugars. The major fatty acids identified (>5 %) were anteiso-C<SUB>15 : 0</SUB>, iso-C<SUB>15 : 0</SUB>, summed feature 4 (iso-C<SUB>17 : 1</SUB>I/anteiso-C<SUB>17 : 1</SUB>B), iso-C<SUB>16 : 0</SUB> and anteiso-C<SUB>17 : 0</SUB>. The predominant menaquinone was MK-9(H<SUB>4</SUB>). The G+C content of the genomic DNA of strain EGI 80088<SUP>T</SUP> was 70.6 mol%. EGI 80088<SUP>T</SUP> showed the highest 16S rRNA gene sequence similarity to its closest phylogenetic neighbour <I>Haloactinopolyspora alba</I> YIM 93246<SUP>T</SUP> (98.5 %). The DNA–DNA relatedness value of the strain EGI 80088<SUP>T</SUP> and <I>H. alba</I> YIM 93246<SUP>T</SUP> was 59.3±5.2 %. On the basis of morphological, chemotaxonomic and phylogenetic characteristics and DNA–DNA hybridization data, strain EGI 80088<SUP>T</SUP> represents a novel species of the genus <I>Haloactinopolyspora</I>, for which the name <I>Haloactinopolyspora alkaliphila</I> sp. nov. (type strain EGI 80088<SUP>T</SUP> = BCRC 16946<SUP>T</SUP> = JCM 19128<SUP>T</SUP>) is proposed. The description of the genus <I>Haloactinopolyspora</I> has also been emended.</P>

Crack‑free TiO2 films prepared by adjusting processing parameters via liquid phase deposition technique

Jie Li,Hai‑Yan Xu,Ai‑Guo Wang,Feng‑Jun Zhang,Dao‑Sheng Sun,Won‑Chun Oh 한국세라믹학회 2020 한국세라믹학회지 Vol.57 No.2

TiO2 thin films with controllable morphology and grain size were prepared via a liquid phase deposition (LPD) technique. The effects of the processing parameters including the ( NH4)2TiF6 concentration, solution pH, and ( NH4)2TiF6:H3BO3 molar ratio on the grain size and morphology of the films were investigated. The prepared samples were characterized by X-ray diffraction, scanning electron microscopy, and ultraviolet–visible spectroscopy. The results showed that the deposition parameters significantly affected the growth and nucleation velocities of the crystalline grains, which resulted in the formation of TiO2 films with different morphologies and grain sizes. The capillary stress among the grains of the film, which resulted in the cracking of the film, depended on the size of the grains. Thus, the cracking of the LPD-derived TiO2 films could be mitigated by adjusting the deposition parameters.