陳述文種類로서의 才談

변창구 순천향대학교 1989 논문집 Vol.12 No.2

Das Wort 'Witz' gehort zum Wortfeld 'Wissen'. Mittelhochdeutsch 'witze' meint etwa viel Allgemeineres als Witz, namlich : Verstand, Wissen, Klugheit, Weisheit. Ende des 17. Jahrhunderts verengte sich die Bedeutung unter dem Elnfluβdes franzosischen Wortes 'esprit' und 'Witz' bezechnete die geschwinde Gedankenverbindung, die intellektuelle Kombination, die geistige Beweglichkeit, die Leichtigkeit des Beziehens und Assozierens. Seit Beginn des 19. Jahrhundrets tritt das Scherzhafte in den Vordergrund. Witz ist die Gabe der scherzhaften, lustigen Einfalle. Es wurde ublich, das Witz in erst Linie auf die Produkte witziger Verlangung zu beziehen. Nach gegenwartigem Sprachgebrauch ist eine kurze, Lachen erregende Erzahlung, die in einer Pointe gipfelt. Der Witz verschlusselt einen Zusammenhang und deckt ihn dann durch die Pointe auf. Die Struktur des Witzes ist deshalb konsequent auf die abschlieβende, aufdeckende Pointe ausgerichtet. Steigerung und Entladung der Spannung ist eine Voraussetzung, der Witzerzahlungen mit einem im einzelnen zwar variierenden, aber doch fur die Textsorte typischen und damit konstituierenden dreiteiligen Aufbauschema nachkommen. Das dreiteilige Aufbauschema besteht aus 'Einleitung', 'Uberleitung' und 'Pointe'. Eine von den wichtigsten Eigenarten des Witzes ist das Aufdecken unvermuteter, uberraschender Zusammenhange. Diese Eigenart laβt aber unberucksichtigt, daβim Witz als asthetische Phanomen stets ein komischer Sachverhalt vorliegt oder dargestellt ist. Um Witze zu erfinden und zu verstehen, braucht der einzelne nicht nur den > Witz < des Menschen, also sein kognitives Vermogen, sondern als Grundlage, Disposition auch Humor. Humor ist Weltgefuhl, Weltsicht und lachende Gelassenheit trotz der Einsicht in die Komik und Tragik des menschlichen Lebens. Die obersten Untergattungen des Witzes sind der Sprachwitz und Sachwitz. Sprachwitz sondert sich in Worwitz, Satzwitz und Wortspiel. Zu dem Sachwitz gehoren Spielwitz, der schadenfrohe Witz, Wertwitz, Tabuwitz, der humorige Witz, der satirische Witz, und der groteske Witz. Sprachwitz erheitert primar durch seine Aussageweise und die zugrundeliegenden Sachverhalte oder Situationen sind zweitrangig. Sachwitz hingegen bewirkt Lachen durch das Inhaltliche, gekoppelt mit seiner komisch wirkenden Darbietung. Sprachwitz ist bestimmt durch die situationsbezogene komisierende und damit zugleich pointierte Verwendung von Einzelwortern bzw. Satzen oder durch den komisierenden Gebrauch von Zitaten und die nicht konventionelle und damit komisch wirkende Formung von Satzen. Der Sachwitz kann als eine Archetyp menschlicher Aussage bezeichnet werden, sowohl er in mundlicher Uberlieferung und schriftlicher Fixierung als auch in poetischen Texten punktuell gestaltet ist. Der Witz ist ein Zeugnis der geistigen Freiheit des Menschen, die er besitzt trotz aller Bestimmungen, Beschrankungen durch sich selbt und durch seine Auβenwelt.

Glocalization: Joyce in Taiwan

Kunliang Chuang 한국제임스조이스학회 2006 제임스조이스저널 Vol.12 No.2

Glocalization: Joyce in Taiwan Kun-liang Chuang James Joyce studies in Taiwan is always already tinted with global and diasporic colors because of the tutelage of the exiled scholar, Chi-an Hsia, and the Jesuit missionary, Father Demers, at its embryonic stage half a century ago. Over the years, it has gone through dramatic changes in terms of the number of papers published and the range of subjects studied. This paper examines its development and transformation by dividing the 150 entries of Joyce papers into seven categories― Dubliners, A Portrait of the Artist as a Young Man, Ulysses, Finnegans Wake, Exiles, Chinese Translation and its Related Studies, Cross-cultural and General Studies in Joyce. While arguing for the legitimacy of the "inauthenticity" of East-Asian scholars in doing Joyce, the paper also highlights the global-local interaction of Joyce studies in Taiwan, and further calls for regional collaboration among East-Asian Joyceans in order to voice themselves collectively in the international arena of Joyce studies.

Secondary Salient Feature Based GNN for Few-Shot Classification

Chuang Liu,Hu Pan 한국차세대컴퓨팅학회 2022 한국차세대컴퓨팅학회 학술대회 Vol.2022 No.10

The goal of few-shot learning is to use limited labeled samples to achieve effective classification results. To mine the features of images in the limited number of samples, some researchers proposed to mine salient features to improve the classification effect. However, they ignore the use of secondary salient features. Therefore, we propose to use secondary salient features to supplement the deficiency of salient features. Combining with the foreground extraction network and the graph neural network, a better classification effect is obtained in the experiment.

DPIM-Based InSAR Phase Unwrapping Model and a 3D Mining-Induced Surface Deformation Extracting Method: A Case of Huainan Mining Area

Chuang Jiang,Lei Wang,Xuexiang Yu,Shenshen Chi,Tao Wei,Xuelin Wang 대한토목학회 2021 KSCE JOURNAL OF CIVIL ENGINEERING Vol.25 No.2

The mining subsidence in mining area could cause large-gradient deformation in a short period of time. When the deformation gradient exceeds the threshold value of the Differential Interferometry Synthetic Aperture Radar (D-InSAR) technology monitoring gradient, D-InSAR technology is likely to cause the failure of InSAR phase unwrapping algorithm. At this time, the InSAR technology is unable to monitor the 3D surface deformation. Aiming at these problems, an dynamic probability integral method (DPIM)-based InSAR phase unwrapping model and a method of extracting 3D surface deformation were proposed. The phase unwrapping model firstly used the empirical parameters of the probability integral of the mining face to predict the line of sight (LOS) direction deformation phase of the mining subsidence surface. Secondly, the phase of differential interferogram was unwrapped with the assist of the predicted LOS deformation phase under the constraint of DPIM, and the true LOS deformationphase was obtained, then the true LOS deformation phase transformed into LOS deformation. Finally, according to the geometric projection relationship between the LOS deformation and 3D deformation of mining subsidence surface, the probability integral prior model was brought into the equation of the geometric projection relationship. On the basis of relevant boundary conditions, the 3D surface deformation was extracted from the LOS direction deformation field of mining subsidence. The feasibility of the method was verified by the simulation experiment results. The differential interferogram of the subsidence basin was obtained by the differential interference processing of image data of Sentinel-1A on Nov. 16, 2017 and Dec. 10, 2017 of 1613 working face of Guqiao South Mine. By using the DPIM-based phase unwrapping model, the phase of differential interferogram was unwrapped and the 3D surface deformation during this period as well as the deformation extraction method were developed. The results showed that the maximum fitting error value of subsidence was 79 mm, about 8.33% of the maximum value of subsidence, and the fitting error of mean square of subsidence was ±33.5 mm. The results showed that the DPIM-based phase unwrapping model and the method of extracting 3D surface deformation proposed in this paper have certain engineering application values.

Progressive Orthogonal Optimization Design Method for High Efficiency Axial-flow Blower

Chuang Li,Jianrun Zhang,Wenbin Yu 한국유체기계학회 2018 International journal of fluid machinery and syste Vol.11 No.4

To solve the problem of excessive design parameters of flow channel during the comprehensive optimization of the axial-flow blower"s total pressure efficiency and flux, a progressive optimization design method which is based on the importance of structural parameters is proposed. The accurate numerical simulation model of flow channel is built, verified and updated by experiment results. According to the model, progressive orthogonal optimization design is developed as following steps: the first is axial fan design, then the orthogonal design of the structure parameters of entire flow channel is further advanced. This approach is applied to the optimization design of an axial-flow blower in this paper, and the results show that the uniformity of the flow field in the flow channel is significantly increased and the vertexes spreading in the flow channel are obviously reduced, the flux is increased from 0.145m3/s to 0.171m³/s, and the efficiency increased from 45.47% to 58.13%, it indicates that the method can meet the design requirements well while being efficient.

Applications of Petri nets to Non-Monotonic Logic

Chuang Lin,Tadao Murata 대한전자공학회 1990 JTC-CSCC : Joint Technical Conference on Circuits Vol.- No.-

Seismic Performance of a New Type Concrete-Filled Precast Concrete Tubular Column

Chuang Du,Yanzhao Li,Chunxiao Zhang 대한토목학회 2020 KSCE JOURNAL OF CIVIL ENGINEERING Vol.24 No.2

To investigate the seismic behaviour of a new type of concrete-filled precast concrete tubular column, five concrete-filled precast concrete tubular columns varying in concrete strength and stirrup ratio were tested under cyclic loading. The behaviours of the failure mode, hysteretic curve, skeleton curve, bearing capacity, deformability, displacement ductility and energy dissipation were studied to evaluate the seismic resistance performance of the columns. The results show that the failure mode of the concrete-filled precast concrete tubular columns was flexural failure, and the hysteretic curve had a plump shuttle shape, which indicates that the concrete-filled precast concrete tubular column has good energy dissipating capacity. The bearing capacity of the specimen was increased with increasing concrete strength of the precast tube. The stirrup ratio has little effect on its bearing capacity, whereas it has a significant effect on the deformation, ductility and energy dissipation. The story drift of the specimens can meet the requirements of the elastic plastic story drift limit value of 1/50 of the code in China, and the ductility coefficient is greater than 3, which demonstrates that the concrete-filled precast concrete tubular column has excellent seismic properties.

Electrochemical Cr(VI) reduction using a sacrificial Fe anode: Impacts of solution chemistry and stoichiometry

Chuang, Sheng-Ming,Ya, Vinh,Feng, Chiao-Lin,Lee, Shou-Jen,Choo, Kwang-Ho,Li, Chi-Wang Elsevier 2018 Separation and purification technology Vol.191 No.-

<P><B>Abstract</B></P> <P>A systematic investigation of Cr(VI) reduction using electrochemical reduction revealed that the Cr(VI) reduction was extremely fast with reaction kinetics limited by the anodic generation of Fe(II). The Cr(VI) reduction rate increased with decreasing pH at the initial stage of reaction but the time to reach complete Cr(VI) reduction is pH independent. The amount of Fe(II) generated per mole of Cr(VI) reduced was calculated and compared with the stoichiometric value, i.e., 3mole of Fe(II) needed per mole of Cr(VI) reduced. The values are 11.1% higher than the stoichiometric value for pH 7 and 9, but are 32.0% less for pH 3 and 5. The spontaneous reduction of Cr(VI) by Fe<SUP>0</SUP> and adsorption of Cr(VI) to Fe(OH)<SUB>3</SUB> precipitates might contribute the additional Cr(VI) removal. Effect of DO was investigated under various mixing schemes. Under N<SUB>2</SUB> purging, Fe(II) generated for one mole of Cr(VI) reduced is 3.67% higher than the stoichiometric value, while mechanic mixing and aeration mixing show 15% and 19%, respectively, higher than stoichiometric value, indicating that DO does impact Cr(VI) reduction. The electrochemical Cr(VI) reduction process was also employed to treat electroplating wastewater with and without pH pre-adjustment, achieving 100% total Cr and Ni removal for both cases. ORP can be used as a controlling parameter when electrochemical reduction is implemented for Cr(VI) reduction.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Effect of current on Cr(VI) reduction under same current density was studied. </LI> <LI> Effects of initial and fixed pH on Cr(VI) reduction were investigated. </LI> <LI> Effect of DO on Cr(VI) reduction was explored. </LI> <LI> Electrochemical reduction was applied for treating electroplating wastewater. </LI> <LI> ORP is an ideal parameter for controlling electrochemical Cr(VI) reduction. </LI> </UL> </P>

The blade shape optimization of a lowpressure axial fan using the surrogatebased multi-objective optimization method

Chuang Kong,Meng Wang,Tao Jin,Shaoliang Liu 대한기계학회 2023 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.37 No.1

As a core component of a fan, the blade has a decisive impact on the aerodynamic performance of a low-pressure axial flow fan. Due to the limitations of the classical fan design theory on considering the complex 3D internal flow, the spanwise distribution of blade stacking line and section profiles are usually hard to reach the best state. This paper builds a surrogate-assistant multi-objective optimization flow combined with CFD method to explore the optimum blade shape under two typical working conditions. A total of 16 parameters were selected for demonstrating the blade stacking line and section profiles, according to Morris one-ata-time sensitivity analysis. The objective and constraint functions were the fan’s total-to-static efficiency and static pressure rise, respectively. During the optimization, the surrogate models of all response functions were built using kriging models, on which the multi-objective genetic algorithm takes the exploration. The optimization results indicate that the maximum improvement of the efficiency is 1.26 % for low mass flow working condition and 5.47 % for high mass flow working condition. The optimized models tend to make the low-pressure zone distributed along the blade leading edge in the meridian view and to reduce the tip leakage vortex intensity. This paper provides a good practical demonstration of multi-objective fine optimization on the blade shape of a low-pressure axial flow fan.

Effects of Saccharomyces cerevisiae and phytase co-fermentation of wheat bran on growth, antioxidation, immunity and intestinal morphology in broilers

Chuang, Wen-Yang,Lin, Li-Jen,Hsieh, Yun-Chen,Chang, Shen-Chang,Lee, Tzu-Tai Asian Australasian Association of Animal Productio 2021 Animal Bioscience Vol.34 No.7

Objective: The aim of this study was to investigate the effects of different amounts of wheat bran (WB) inclusion and postbiotics form by Saccharomyces cerevisiae and phytase co-fermented wheat bran (FWB) on the growth performance and health status of broilers. Methods: Study randomly allocated a total of 300 male broilers to a control and 4 treatment groups (5% WB, 5% FWB, 10% WB, and 10% FWB inclusion, respectively) with each pen having 20 broilers and 3 pens per treatment. Results: The WB does not contain enzymes, but there are 152.8, 549.2, 289.5, and 147.1 U/g dry matter xylanase, protease, cellulase and β-glucanase in FWB, respectively. Furthermore, FWB can decrease nitric oxide release of lipopolysaccharide stimulated chicken peripheral blood mononuclear cells by about two times. Results show that 10% FWB inclusion had significantly the highest weight gain (WG) at 1 to 21 d; 5% FWB had the lowest feed conversion rate at 22 to 35 d; 10% WB and 10% FWB inclusion have the highest villus height and Lactobacillus spp. number in caecum; and both 5% and 10% FWB can increase ash content in femurs. Compared to control group, all treatments increase mucin 2, and tight junction (TJ), such as occludin, claudin-1, zonula occludens-1, and mRNA expression in ileum by at least 5 folds. In chicken peripheral blood mononuclear cells, nicotinamide adenine dinucleotide phosphate-oxidase-1 mRNA expression decreases from 2 to 5 times, and glutamate-cysteine ligase catalytic subunit mRNA expression also increases in all treatment groups compared to control group. The mRNA expression of pro-inflammatory cytokines, including interleukin-6 (IL-6), nuclear factor-κB, and IL-1β, decreases in 5% and 10% FWB groups compared to control group. Conclusion: To summarize, both WB and FWB inclusion in broilers diets increase TJ mRNA expression and anti-oxidation and anti-inflammation, but up to 10% FWB groups have better WG in different stages of broiler development.