http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
조진호(J. H. Cho),김종훈(J. H. Kim),조유진(Y. J. Cho),안형준(H. J. Ahn),박영빈(Y. B. Park),박효순(H. S. Park),우승탁(S. T. Woo),신동호(D. H. Shin),김동욱(D. W. Kim),임형규(H. G. Lim),이정현(J. H. Lee),성기웅(K. W. Seong) 한국재활복지공학회 2015 한국재활복지공학회 학술대회논문집 Vol.2015 No.11
In this paper, we present the development procedure of fully implantable hearing device with round window driving method which is named ACROSS-RW. The system consists of an implantable microphone, a signal processing body, and a vibration transducer. Each component is developed with needs of hearing losses and novel idea for overcoming lacks of previous studies. The performance of the system is evaluated from public certification organization and mechanical engineering laboratory of Stanford University in USA, which is well-known for testing of active middle ear implants. ACROSS-RW can provide natural sound and good cosmetic to people who suffer from hearing loss.
Glass / p μc-Si:H 특성에 따른 i μc-Si:H 층 및 태양전지 특성변화 분석
장지훈(Jang, J.H.),이지은(Lee, J.E.),김영진(Kim, Y.J.),정진원(Jung, J.W.),박상현(Park, S.H,),조준식(Cho, J.S.),윤경훈(Yoon, K.H.),송진수(Song, J.),박해웅(Park, H.W.),이정철(Lee, J.C.) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.06
PECVD를 이용하여 제조된 미세결정질 p-i-n 실리콘 박막 태양전지에서, p 층은 태양전지의 윈도우 역할 및 그 위에 증착될 i {mu}c-Si:H 층의 'seed'층 역할을 수행하기 때문에, p층의 구조적 및 전기적, 광학적 특성은 태양전지의 전체 성능에 큰 영향을 미칠 수 있다. 본 연구에서는 SiH₄ 농도를 변화시켜 각기 다른 결정 특성을 갖는 p {mu}c-Si:H층을 제조하고 그 위에 i {mu}c-Si:H 층을 증착하여 p층의 결정 특성변화와 그에 따른 i {mu}c-Si:H 층 및 'superstrate' p-i-n 미세결정질 실리콘 박막 태양전지의 특성 변화를 조사하였다. P층의 경우, SiH₄ 농도가 증가함에 따라 결정분율 (Xc)이 감소하여 비정질화되었으며 그에 따라 dark conductivity가 감소하는 경향을 나타내었다. 각기 다른 결정분율을 가지는 p 'seed' 층 위에 증착된 태양전지는, p 'seed' 층의 결정분율이 증가함에 따라 개방전압, 곡선인자, 변환효율이 경향적으로 감소하였다. 이는 p 층 결정분율 변화에 따른 p/i 계면특성 저하 및 그 위에 증착되는 i {mu}c-Si:H 층의 결함밀도 증가 등에 따른 태양전지 특성 감소 때문인 것으로 판단되며, 이를 분석하기 위하여 i {mu}c-Si:H 층의 전기적, 구조적 특성 분석 및 태양전지의 dark I-V 특성 등을 분석하고자 한다.
천공유압드릴 장비에서 작업 동작에 따른 연비 측정 및 평가 기술 연구
최진구(J. G. Choi),강주영(J. Y. Kang),김종민(J. M. Kim),배종원(J. W. Bae),이충근(C. G. Lee),이정호(J. H. Lee),김주호(J. H. Kim),이대엽(D. Y. Lee),송윤우(Y. W. Song),김명보(M. B. Kim),조재상(J. S. Cho) 유공압건설기계학회 2017 유공압건설기계학회 학술대회논문집 Vol.2017 No.11
In order to improve the fuel economy of a hydraulic drilling machine, which consumes relatively large amount of fuel compared to other typical construction machinery, a comparison is made between gravimetric fuel consumption using mass flowmeter and CAN signal. And, since the data of CAN signal is close enough to the measured data of a flowmeter, fuel consumption at real work mode is measured and analyzed using CAN signals. A result show that drilling mode occupies about 67.4% of total fuel consumption. It is concluded that this work may contribute to enhance fuel economy of hydraulic drilling machines.
수소화 처리된 InAs/GaAs 양자점 적외선 수광소자의 전기적 특성
남형도,송진동,최원준,조운조,이정일,최정우,양해석,Nam H.D.,Song J.D.,Choi W.J.,Cho W.J.,Lee J.I.,Choe J.W.,Yang H.S. 한국진공학회 2006 Applied Science and Convergence Technology Vol.15 No.2
InGaAs/GaAs 양자 우물 내에 삽입된 InAs 양자점으로 구성된 5층의 흡수층과 $Al_{0.3}Ga_{0.7}As/GaAs$ SL (superlattice) 암전류 장벽층을 갖는 QDIP (quantum dot infrared photodetector) 구조에 대한 수소 RF 플라즈마에 의한 수소화 처리가 QDIP의 전기적. 광학적 특성에 미치는 영향에 대해 연구하였다. RF 플라즈마 수소화 처리는 양자점의 밴드구조에 영향을 미치지 않았으며 $Al_{0.3}Ga_{0.7}As/GaAs$ SL 암전류 장벽층 내의 결함 제거 및 QDIP 구조 내 결함 생성을 동시에 유도함으로써 QDIP의 전기적 특성 향상은 수소 플라즈마 처리시간의 함수임을 알았다. 20 W의 수소 RF 플라즈마를 사용했을 때, 10분간의 플라즈마 조사가 가장 좋은 전기적 특성을 제공하여 높은 암전류 때문에 원시료에서는 측정 할 수 없었던 광전류 신호를 측정 할 수 있었다. In this paper, we investigated the effect of hydrogen-plasma (H-plasma) treatment on the electrical and optical properties of a quantum dot infrared photodetector (QDIP) with a 5-stacked InAs dots in an InGaAs/GaAs well structure and $Al_{0.3}Ga_{0.7}As/GaAs$ SL (superlattice) current blocking layer. It has been observed that H-plasma treatment didn't affect the band structure of QDIP. It has been also observed that the H-plasma treatment on the QDIP not only enhance the electrical property of QDIP by curing the defect channels in $Al_{0.3}Ga_{0.7}As/GaAs$ SL but also introduce defects in QDIP structure. The H-plasma treatment for 10 min with 20 W of RF power provided the lowest dark current, which made it possible to measure the photo-current (PC) of QDIP whose PC was not detectable without the H-plasma treatment due to the high dark current.
조승연(S. Cho),김형섭(H. S. Kim),도철진(C. J. Do),박종학(J. H. Park),사정우(J. W. Sa),엄기원(K. W. Urm),유인근(I. K. Yu),윤병주(B. J. Yoon),이강희(K. H. Lee),인상렬(S. R. In),임기학(K. H. Im),임종연(J. Y. Lim),조창호(C. H. Cho),정영수(Y. S. J 한국진공학회(ASCT) 1999 Applied Science and Convergence Technology Vol.8 No.4(1)
한국중공업(주)에서 수행한 KSTAR 진공용기 시작품 제작이 완성됨에 따라 제작과 관련된 종합기술을 소개하고 분석하여 보았다. KSTAR 진공용기는 국내에서 제작경험이 없는 대형 진공용기이다. 따라서 이번 시작품을 통하여 구조물의 일체성과 원하는 초고진공을 얻기 위한 용접 방법을 시험하여 보았으며, 보강리브와 이중벽, 그리고 다양한 종류의 포트들로 구성된 복잡한 구조물에 대한 가공 및 조립방법을 개발해 내였다. 용접부위에 기본적인 누출시험을 수행하였으며 사용된 용접방법이 시험기준을 통과함을 확인하였다. 또한 시작품의 주 목적중의 하나인 제작 전후 치수변경측정을 통하여 대형 진공용기 조립성 및 제작성을 검토하여 보았다. 이번 시작품 제작을 통하여 발생된 문제점을 파악하고 개선책을 마련함으로써 향 후 KSTAR 진공 용기 본 제품 제작할 때 반영코자 한다. KSTAR vacuum vessel mockup was fabricated by Korea Heavy Industries. The fabrication technology chosen for the mockup is introduced and assessed in this paper. KSTAR vacuum vessel is a huge vacuum chamber of 52 cubic meters never built in this country. Through the experience of the KSTAR mockup fabrication, welding methods for obtaining both ultra high vacuum and structural integrity of the large vacuum chamber are extracted. The fabrication and assembly techniques for the complicated structure composed of reinforced ribs, double walls and various ports are also developed. A nondestructive test on the welding spot was performed and the results show that no major leaks violating the criterion were found. The one of the main objectives of the mockup fabrication is to measure the dimensions of the structure before and after fabrication, which plays an important role in the fabrication and the assembly. By assaying the problems occurred during mockup fabrication, the KSTAR mockup will provide the techniques for the fabrication of the main vacuum vessel.
Residual Multi-dilated convolution U-Net을 이용한 다중 심장 영역 분할 알고리즘 연구
임상헌 ( Sang-heon Lim ),최한승 ( H. S. Choi ),배희진 ( S. K. Jung ),정서경 ( J. K. Jung ),정진교 ( Myung-suk Lee ),이명숙 한국정보처리학회 2019 한국정보처리학회 학술대회논문집 Vol.26 No.1
본 연구에서는 딥 러닝을 이용하여 완전 자동화된 다중 클래스 전체 심장 분할 알고리즘을 제안하였다. 제안된 방법은 recurrent convolutional block과 residual multi-dilated block을 삽입하여 기존 U-Net을 개선한 인공신경망 모델을 사용하였다. 평가는 자동화 분석 결과와 수동 평가를 비교하였다. 그 결과 96.88%의 평균 DSC, 95.60%의 정확도, 97.00%의 recall을 얻었다. 이 실험 결과는 제안된 방법이 다양한 심장 구조에서 효과적으로 구분되어 수행되었음을 알 수 있다. 본 연구에서 제안된 알고리즘이 의사와 방사선 의사가 영상을 판독하거나 임상 결정을 내리는데 보조적 역할을 할 것을 기대한다.
Introduction of virtual open chamber for testing a weather modification technique in Korea
J-W Cha,K-H Chang,M-J Lee,J-Y Jeong,J-W Jung,H-Y Yang,K-L Kim,Y-C Kim,C-H Kim,K-H Nam,M-K Suk,C-K Jung,H-Y Go,J-H Chae,G-W Lee,Y-H Cho,S-H Jung,H-M Park,Y-A Oh,J-Y Jung,B-G Kim,Y-J Kim,M-H Choi,S-D Ki 한국기상학회 2009 한국기상학회 학술대회 논문집 Vol.2009 No.4