Optimization of the microemulsion formulation of curcuma oil and evaluation of its acaricidal efficacy against Tetranychus cinnabarinus (Boisduval) (Acari: Tetranychidae)

Cheng Zuo-Hui,Fan Fang-Fang,Zhao Jin-Zhong,Li Rui,Li Sheng-Cai,Zhang En-Jia,Liu Yu-Kun,Wang Jue-Ying,Zhu Xiang-Run,Tian Yong-Ming 한국응용곤충학회 2020 Journal of Asia-Pacific Entomology Vol.23 No.4

The microemulsion formulation (hereafter formulation) of curcuma oil and its acaricidal efficacy against Tetranychus cinnabarinus Boisduval (Acari: Tetranychidae) were optimized in the laboratory to evaluate their spray effectiveness of oviposition inhibition and repellence. Ethovision XT6 was used to analyse the effects of the sublethal concentrations (LC 20 ) of curcuma oil and the formulation on the behaviors of T. cinnabarinus. The results showed that Tween-80 was the best surfactant, Isopropanol was the best co-surfactant and K m = 2:1 was the best condition for the formulation. The prepared microemulsions are stable under conditions of centrifugation and incubation for extended periods. The results showed that the effect of the spray bioassays of the formulation against T. cinnabarinus continuously increased during the experiment, but for curcuma oil almost no longer increase observed when the exposure time went beyond 24 h. Moreover, compared with curcuma oil (LC 50 = 0.716%), the spray bioassay of the formulation (LC 50 = 0.035%) was stronger against T. cinnabarinus. The repellency of the formulation to T. cinnabarinus was stronger with increasing exposure time, but that of curcuma oil declined after 12 h of exposure. The mobile distance of T. cinnabarinus treated with the formulation continuously declined during the experiment but that due to the curcuma oil almost no longer declined when the treatment time reached 12 h. The maximum mobile frequency of T. cinnabarinus treated by curcuma oil and the formulation was recorded at 6 h and 12 h, respectively. Thus, the formulation is a promising candidate as a botanical acaricide of green vegetables.

Perforation optimization of hydraulic fracturing of oil and gas well

Zhu, Hai Yan,Deng, Jin Gen,Chen, Zi Jian,An, Feng Chen,Liu, Shu Jie,Peng, Cheng Yong,Wen, Min,Dong, Guang Techno-Press 2013 Geomechanics & engineering Vol.5 No.5

Considering the influences of fluid penetration, casing, excavation processes of wellbore and perforation tunnels, the seepage-deformation finite element model of oil and gas well coupled with perforating technique is established using the tensile strength failure criterion, in which the user-defined subroutine is developed to investigate the dynamic evolvement of the reservoir porosity and permeability. The results show that the increases of perforation angle and decreases of perforation density lead to a higher fracture initiation pressure, while the changes of the perforation diameter and length have no evident influences on the fracture initiation pressure. As for initiation location for the fracture in wellbore, it is on the wellbore face while considering the presence of the casing. By contrast, the fractures firstly initiate on the root of the tunnels without considering casing. Besides, the initial fracture position is also related with the perforation angle. The fracture initiation position is located in the point far away from the wellbore face, when the perforation angle is around $30^{\circ}$; however, when the perforation angle is increased to $45^{\circ}$, a plane fracture is initiated from the wellbore face in the maximum horizontal stress direction; no fractures was found around perforation tunnels, when the angel is close to $90^{\circ}$. The results have been successfully applied in an oilfield, with the error of only 1.1% comparing the fracture initiation pressure simulated with the one from on-site experiment.

Production of Citrate by Anaerobic Fungi in the Presence of Co-culture Methanogens as Revealed by ¹H NMR Spectrometry

Cheng, Yan Fen,Jin, Wei,Mao, Sheng Yong,Zhu, Wei-Yun Asian Australasian Association of Animal Productio 2013 Animal Bioscience Vol.26 No.10

The metabolomic profile of the anaerobic fungus Piromyces sp. F1, isolated from the rumen of goats, and how this is affected by the presence of naturally associated methanogens, was analyzed by nuclear magnetic resonance spectroscopy. The major metabolites in the fungal monoculture were formate, lactate, ethanol, acetate, succinate, sugars/amino acids and ${\alpha}$-ketoglutarate, whereas the co-cultures of anaerobic fungi and associated methanogens produced citrate. This is the first report of citrate as a major metabolite of anaerobic fungi. Univariate analysis showed that the mean values of formate, lactate, ethanol, citrate, succinate and acetate in co-cultures were significantly higher than those in the fungal monoculture, while the mean values of glucose and ${\alpha}$-ketoglutarate were significantly reduced in co-cultures. Unsupervised principal components analysis revealed separation of metabolite profiles of the fungal mono-culture and co-cultures. In conclusion, the novel finding of citrate as one of the major metabolites of anaerobic fungi associated with methanogens may suggest a new yet to be identified pathway exists in co-culture. Anaerobic fungal metabolism was shifted by associated methanogens, indicating that anaerobic fungi are important providers of substrates for methanogens in the rumen and thus play a key role in ruminal methanogenesis.

Studies on Related Enzymes during the Synthesis and Metabolism of the Flavonoids in Ginkgo biloba Leaf

Cheng Shui Yuan,Wang Yan,Xu Feng,Fei Yong Jun,Zhu Gui Cai 한국원예학회 2006 한국원예학회 기타간행물 Vol.- No.-

Molecular Dynamics Simulation to Investigate the Rake Angle Effects on Nanometric Cutting of Single Crystal Ni3Al

Rui-cheng Feng,Yong-nian Qi,Zong-xiao Zhu,Wen-yuan Song,Hai-yan Li,Mao-mao Wang,Zhi-yuan Rui,Feng-shou Gu 한국정밀공학회 2020 International Journal of Precision Engineering and Vol.21 No.4

Molecular dynamics, an eff ective method to gain an insight into nanometric behaviour of materials, was employed to studythe nano-cutting behaviour of single crystal Ni 3 Al in nanometric scale. In this paper, comparisons were made for compressive/tensile stress, subsurface damage and surface roughness with three rake angles of a diamond tool. Subsurface damage waspartitioned by region and studied with work hardening in detail. A model for precise characterization of surface roughnesswas established with consideration of local surface fl uctuation. Simulation results showed that the chip thickness increasedas rake angle changed from negative to positive, and the boundary formed between tensile and compressive stress was inconsistent with the glide direction of stacking fault. Subsurface damage decreased as the increase of rake angle, and regularglide planes of stacking faults were found in front of the cutting tool. Further, the pinned dissociated 1/2 < 110 > superpartialdislocation with anti-phase boundary was demonstrated. The model was tested and characterized by implanted pits onperfect surface. Results showed that surface roughness can be well characterized, and an evident discrepancy was observedamong three rake angles, especially for 30° rake angle, which showed an distinct smooth surface compared with the others.

8q24 rs4242382 Polymorphism is a Risk Factor for Prostate Cancer among Multi-Ethnic Populations: Evidence from Clinical Detection in China and a Meta-analysis

Zhao, Cheng-Xiao,Liu, Ming,Xu, Yong,Yang, Kuo,Wei, Dong,Shi, Xiao-Hong,Yang, Fan,Zhang, Yao-Guang,Wang, Xin,Liang, Si-Ying,Zhao, Fan,Zhang, Yu-Rong,Wang, Na-Na,Chen, Xin,Sun, Liang,Zhu, Xiao-Quan,Yuan Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.19

Background: Evidence supporting an association between the 8q24 rs4242382-A polymorphism and prostate cancer (PCa) risk has been reported in North American and Europe populations, though data from Asian populations remain limited. We therefore investigated this association by clinical detection in China, and meta-analysis in Asian, Caucasian and African-American populations. Materials and Methods: Blood samples and clinical information were collected from ethnically Chinese men from Northern China with histologically-confirmed PCa (n=335) and from age-matched normal controls (n=347). The 8q24 (rs4242382) gene polymorphism was genotyped by polymerase chain reaction-high-resolution melting analysis. We initially analyzed the associations between the risk allele and PCa and clinical covariates. A meta-analysis was then performed using genotyping data from a total of 1,793 PCa cases and 1,864 controls from our study and previously published studies in American and European populations, to determine the association between PCa and risk genotype. Results: The incidence of the risk allele was higher in PCa cases than controls (0.222 vs 0.140, $P=7.3{\times}10^{-5}$), suggesting that the 8q24 rs4242382-A polymorphism was associated with PCa risk in Chinese men. The genotypes in subjects were in accordance with a dominant genetic model (ORadj=2.03, 95%CI: 1.42-2.91, $Padj=1.1{\times}10^{-4}$). Presence of the risk allele rs4242382-A at 8q24 was also associated with clinical covariates including age at diagnosis ${\geq}65$ years, prostate specific antigen >10 ng/ml, Gleason score <8, tumor stage and aggressive PCa, compared with the non-risk genotype ($P=4.6{\times}10^{-5}-3.0{\times}10^{-2}$). Meta-analysis confirmed the association between 8q24 rs4242382-A polymorphism and PCa risk (OR=1.62, 95%CI: 1.39-1.88, $P=1.0{\times}10^{-5}$) across Asian, Caucasian and African American populations. Conclusions: The replicated data suggest that the 8q24 rs4242382-A variation might be associated with increased PCa susceptibility in Asian, Caucasian and African American populations. These results imply that this polymorphism may be a useful risk biomarker for PCa in multi-ethnic populations.

Identification of Specific Gene Modules in Mouse Lung Tissue Exposed to Cigarette Smoke

Xing, Yong-Hua,Zhang, Jun-Ling,Lu, Lu,Li, De-Guan,Wang, Yue-Ying,Huang, Song,Li, Cheng-Cheng,Zhang, Zhu-Bo,Li, Jian-Guo,Xu, Guo-Shun,Meng, Ai-Min Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.10

Background: Exposure to cigarette may affect human health and increase risk of a wide range of diseases including pulmonary diseases, such as chronic obstructive pulmonary disease (COPD), asthma, lung fibrosis and lung cancer. However, the molecular mechanisms of pathogenesis induced by cigarettes still remain obscure even with extensive studies. With systemic view, we attempted to identify the specific gene modules that might relate to injury caused by cigarette smoke and identify hub genes for potential therapeutic targets or biomarkers from specific gene modules. Materials and Methods: The dataset GSE18344 was downloaded from the Gene Expression Omnibus (GEO) and divided into mouse cigarette smoke exposure and control groups. Subsequently, weighted gene co-expression network analysis (WGCNA) was used to construct a gene co-expression network for each group and detected specific gene modules of cigarette smoke exposure by comparison. Results: A total of ten specific gene modules were identified only in the cigarette smoke exposure group but not in the control group. Seven hub genes were identified as well, including Fip1l1, Anp32a, Acsl4, Evl, Sdc1, Arap3 and Cd52. Conclusions: Specific gene modules may provide better understanding of molecular mechanisms, and hub genes are potential candidates of therapeutic targets that may possible improve development of novel treatment approaches.

Self‐assembly of covalent porphyrin compound and its enhanced electrochemiluminescence performance

Wen-Kai Zhu,Wen-Rong Cai,Zhen-Zhi Yin,Ming-Jie Cheng,Kong Yong 대한화학회 2022 Bulletin of the Korean Chemical Society Vol.43 No.12

A novel Zn-coordination covalent porphyrin assembly (TCPP-BZA-Zn) is designed. The assembly structure is synthesized through the amidation reac- tion between the porphyrin terminal carboxyl group and the amino group of benzylamine (BZA), and further assembled through π–π stacking. In particular, the inherently ordered structure of TCPP-BZA-Zn with Zn as the catalytic active center endows the porphyrin assembly structure with several obvious advantages, such as high ion transport properties and high electrocatalytic per- formance. In the presence of hydrogen peroxide as a co-reaction reagent, TCPP-BZA-Zn/GCE showed excellent ECL behavior. The amplification phenome- non of ECL was further studied by cyclic voltammetry and the corresponding mechanism was proposed. Based on TCPP-BZA-Zn, an electrochemilumines- cence sensor was constructed for copper ion detection. The ECL intensity of the sensor shows a good linear relationship with the concentration of copper ion in the range of 10 nM–1 mM, and the detection limit is 1.3 nM.

Slide Session : OS-GAS-04 ; Gastroenterology : Uric Acid Regulates Hepatic Steatosis and Insulin Sig-naling Through the NLRP3 Infl ammasome Dependent Mechanism

( Wan Xing Yong ),( Xu Cheng Fu ),( Lu Chao ),( Yu Wei Lai ),( Zhu Hua Tuo ),( Yu Chao Hui ),( Li You Ming ) 대한내과학회 2014 대한내과학회 추계학술대회 Vol.2014 No.1

Background: Serum uric acid is strongly associated with nonalcoholic fatty liver disease (NAFLD) and insulin resistance in patients. However, whether this association is causally or coincidentally with NAFLD and insulin resistance remains uncertain, neither the mechanisms behind this association are unclear so far. Methods: We first analyzed the impact of uric acid on development of hepatic steatosis in mice and two cell models (HepG2 and HL7702), and then explored the effect of uric acid on insulin signaling, including phosphorylation of insulin receptor substrate 1 (IRS1) and Akt in HepG2 and HL7702 cells. Further, we studied the role of NLRP3 inflammasome in regulation of hepatic steatosis and insulin signaling. Results: Uric acid directly induced hepatocyte fat accumulation both in vivo and in vitro. Further, uric acid treatment decreased insulin-induced phospho-Akt (ser437) and enhanced the phospho-IRS1(ser307) in HepG2 and HL7702 cells. Then, we found significant increases of NLRP3 inflammasome-related molecules, both mRNA and protein levels, including NLPR3, caspase-1, IL-1ß, and IL-18, in HepG2 and HL7702 cells stimulated with uric acid. We also found that uric acid induced significant elevations of IL-1ß and IL-18 levels in culture supernatants of HepG2 and HL7702 cells. Consistent with in vitro results, mice fed 8 weeks of hyperuricemia-inducing diet resulted in significant up-regulation of hepatic mRNA and protein expressions of NLPR3, caspase-1, IL-1ß and IL-18, and elevation of serum IL-1ß and IL-18 levels. Further experiments indicated that silencing NLRP3 expression significantly alleviated uric acid-induced fat accumulation in vitro. Moreover, inhibition of NLRP3 expression ameliorated uric acid induced insulin signaling impairing, confirmed by increased insulin- induced phospho-Akt (ser437) and reduced the phospho-IRS1(ser307) in vitro. Conclusions: Our results suggest that uric acid contributes to hepatic steatosis and impairs insulin signaling through the NLRP3 inflammasome dependent mechanism.

Collaborative optimization for ring-stiffened composite pressure hull of underwater vehicle based on lamination parameters

BIN LI,Yong-jie Pang,Yan-xue Cheng,Xiao-meng Zhu 대한조선학회 2017 International Journal of Naval Architecture and Oc Vol.9 No.4

A Collaborative Optimization (CO) methodology for ring-stiffened composite material pressure hull of underwater vehicle is proposed. Structural stability and material strength are both examined. Lamination parameters of laminated plates are introduced to improve the optimization efficiency. Approximation models are established based on the Ellipsoidal Basis Function (EBF) neural network to replace the finite element analysis in layout optimizers. On the basis of a two-level optimization, the simultaneous structure material collaborative optimization for the pressure vessel is implemented. The optimal configuration of metal liner and frames and composite material is obtained with the comprehensive consideration of structure and material performances. The weight of the composite pressure hull decreases by 30.3% after optimization and the validation is carried out. Collaborative optimization based on the lamination parameters can optimize the composite pressure hull effectively, as well as provide a solution for low efficiency and non-convergence of direct optimization with design variables.